EARMOR M32H ARC Rail Adapters Installation Guide

[@AirsoftReviewArgentina]

Very cool and helpful guide. I've just watched Anvil Airsoft TV's review and they wear their m32s inside their helmet too!

[@heinzguderian6655]

I thinking about buy some of them but I have a question Can I use this model on mobile phone or not ?

[@AirsoftReviewArgentina]

Good question, I've not tried that @@heinzguderian6655

[@Krmt1337]

@@heinzguderian6655I don’t think so. If you want to connect the earpro to ur phone they need to have the classic jack. Look for walkers razor or howard leighs impact sport

[@budrobadre]

Mine fell off every time I tried to flip the M32's up. It turned out to be because the rails I was using on my helm were cheap ones from aliexpress. I re-installed my original rails and now they work great. Hopefully this can help anyone thats running into the same problem.

[@feydortan4817]

Do NOT do the first step (removing the attachement between the headstrap and the phone unit by popping it) with the M32 MILPRO mark3 it will BREAK the fixation because they are not removable on this model (i don't know for other models) PS : Yes i broke one of mine, but it's all plastic so with a super glue it will be fixed and invisible

[@rad0waan6]

Which glue you used?

[@feydortan4817]

@@rad0waan6 i dont remember but it doesnt work perfectly so i ordered remplacement parts

[@rad0waan6]

@@feydortan4817 Are those part original from earmor or is it something like 3D printed? Broke my fixation right now and it kinda ruined my day ':D

[@epapa737]

Would kill for some explanation for attaching onto a arc rail

[@ninakeszler7755]

i used a hammer to put them in to place...

[@mr.jordan6626]

Yea used brutal strength to get it on emerson fast helmet

[@stukayou6735]

I should have watch this video earlier, so I don't have to broke my old headset mount ;-; thank you earmor

[@darkburnstar9269]

Same thing happened to me. What I did to fix it was melt a hole in the center of the bracket mount & used a small screw & washer to expand it to keep the earphone tight on the nub. It worked & looks good cuz I used a black screw & washer 👍🏽

[@Phoenix_OP]

Will there be a installation guide for those who use the Team Wendy helmets?

[@spongekira5766]

You have to get an extra part to attach arc rail mount to team Andy rails since they have a different system. You can find arc rail prices for team Wendy rails online for fairly cheap I think.

[@smugfrog8111]

Thanks for this. I was trying to put the ARC mounts in wrong =/

[@jamesvieau870]

Any time after I have the earcups installed if there is any pressure put outwards, it pops out of the rail.

[@earmorstore7759]

Hello James. Can you drop email to [e-mail] please.

[@Dutchcontrol_]

I have the dame issue

[@roywrogers2900]

Very cool and helpful guide. Thanks for share. like

[@wallium6681]

I have the same helmet I bought the same system and it doesn't fit, explain.

[@kagehovede]

I can't make you'r adapter fit on my One Tigris helmet. Which brand is the helmet used on the video?

[@GroovyTorch]

If you don't found a netter Helmet. So i can tell you that the FMA Fast Helmet works. I've got the same problem.

[@kagehovede]

@@GroovyTorch Thanks man, but I actually managed to file of some of the plastic, and then I gave it some silicon spray.

[@the_storm_ryder]

I have a one tigris helmet too..... About to buy a pair, what model of the helmet do you have and how much filing did you have to do?

[@kagehovede]

@@the_storm_ryder can’t remember the exact model but filed just a little bit and lots of silicon spray and then I kinda had to find my inner bodybuilder which was the hardest part 😂

[@CAJfur]

Thank you!.

[@user-be1it9zi8v]

How do you get the headstrap off on the MOD3's? You can unflip the ends but the wire goes through holes in it. The arc rail kit specifically says it's a non destructive process

[@foozhostig3381]

He says at the start, if you have the leatherette strap you need to cut it.

[@user-be1it9zi8v]

@@foozhostig3381 Seems really stupid to make a product that you have to break to use it though right. And the product description when I bought the mounts said it was non destructive. Think they need to go back to the drawing board!

[@foozhostig3381]

@@user-be1it9zi8v Right? I'm pissed I needed to destroy mine but I really wanted to mount them in my helmet. Then I found out I could have just put the headband inside the helmet so I'm kicking myself now haha

[@user-be1it9zi8v]

@@foozhostig3381 Yeah, I have 2 setups, a helmet one and a baseball cap one , I really want to mount them but it means losing them for the cap. I tried under the helmet, it's ok but a lot more hassle :(

[@foozhostig3381]

@@user-be1it9zi8v I've tried under the helmet and with the mounts, I cant get the headphones high enough using the mounts to work properly so I've decided on under the helmet.

[@rc-pm1fe]

I have a mod4 m32 and I am trying to take the mic off to switch sides but I feel like I'm going to break the mount if I do it his way, any suggestions, or is that correct?

[@heinzguderian6655]

I want buy one of them but is this model can use at mobile phone ?

[@TheBigManPotato]

The archrail adapters that came with my earpro are too small for the archrails on the helmet. They don't lock in and then i angle them up a bit they just fall out again

[@earmorstore7759]

Which manufacturer helmet do you use? Some cheaper helmets has cheaper ARC rails and in this case not fitting well.

[@TheBigManPotato]

@@earmorstore7759 i have an FMA carbon fiber fast helmet but the issue was resolved turns out the store accidentally sold me a headset with the wrong adapters. Everything works now 👍🏼

[@G4besalright]

Can’t seem to get the rail adaptors to fit on my helmet

[@Doomredeemer]

Helpful.

[@tunderstorm2769]

where can you even plug them in?

[@goonholiday656]

So after switching to the helmet and rail adapter - mine do not seat against my ears snuggly. So when things go bang, my ears go ouch. I’ve been having to wear ear pro below them.

[@jjj4362]

Same issue have you been able to fix it

[@justicesilva-ferguson309]

I've got the same problem:/ I just straight up bent the little metal bars inward with a two pairs of pliers untill it was snug enough.

[@goonholiday656]

@@jjj4362 eh kind of, so I ended up really squeezing the wire arms in which make things bearable. But I’m eventually going to switch to a new mounting system and see how that goes.

[@Greekmilsim]

Nice. Can I do it with my M30's?

[@Luca-ze5dk]

J’ai un problème j’ai acheter le m32h et aucun moyen de le fixer

[@ryanthesaiyan4105]

What rail adapter is needed for this headset to fit a fast helmet?

[@TheShekerrr]

ARC in most cases

[@bitkarek]

are there mod4 or is it fake? what is the newest I can mount to a helmet?

[@МишаЖуравель-у2к]

Привіт, підскажіть, чи є якийсь адаптер для навушників Earmor mod 3 (такі як на відео) під шолом з закритими вухами (модель шолому незнаю, купляю не для себе)? Зі стандартними адаптерами просто не заходить під шолом) P. s. Варіант зі звичаним ремінем на голову не підходить!

[@groovetorped]

I just pull the metal rod out of the plastic arm instantly now. The plastic nubs on the M32 MOD2s ARE NOT durable enough to snap off the arm; tried it and the nub on the headphone broke. The nubs on the M32 MOD3s are a solid piece however so they might hold, but I won't be taking any chances. So I'll stick with pulling out the metal rod and keeping the plastic arm on.

[@xXjOmAmMaXx]

Yeah, the plastic they made these from is either brittle AF or will deform easily it seems.

[@chspg_alvis]

You're supposed to angle the plastic arm sideways then pull it out, not yank it out. 🤦‍♂️

[@GrimReaper-qk3xd]

Finding it difficult to fit these to my ears

[@indraculawijaya726]

Mic to Earmor M31 please

[@jaiburlingham2615]

The fact the leather band has to be destroyed is stupid you want me to buy the product then break it :/

[@Chesher777]

unfortunately with how the headband on them is done and where the wire is ran, there's no way to remove the connecting wire between the ear pieces without cutting the leather. hopefully this is resolved in a future version, as I'm quite happy with my set.

[@callsignhotshot3567]

I cut mine in a way that would allow me to re-attach it with some hot glue or tape, i didnt want to risk completely ruining it.

[@williambenson6166]

Buy a nicer set that comes with velcro or if you dont like it can buy a nice velcro wrap in camo

[@AirsoftReviewArgentina]

@@Chesher777 the mod3 version of the m32s comes with a velcro headband which you can remove completely. I recently got mine and I'm working on my review...

[@MrJKD360]

Are these safe for shooting or just an airsoft prop?

[@earmorstore7759]

Yes is good for shooting. Earmor M31/M32 has NRR22 standard like other shooting headsets.

[@Greekmilsim]

@@earmorstore7759 what about M30's?

[@lock6512]

Why on earth are they not compatible with ztactical or wadsn PTTs? Its just a pure money grab that you need the extra made earmor PTT...

[@fatdelinquent85]

sadly they don't fit for MICH 2001's ^^

[@holypicklewater]

Just put them on mine, they fit fine.

[@ItchyPilauBoto]

Wtf why are mine so hard to slide onto the arc rails?

[@jwairsoft6911]

Same, mine are stuck on the first slot at the front of the helmet if you have the same problem let me know how to solve it lol

[@ItchyPilauBoto]

@@jwairsoft6911 i just gently tapped it into place with a screwdriver handle lol its built pretty good enough for me.. At least i know its a tight fit and wont move around..

[@jwairsoft6911]

@@ItchyPilauBoto I’m literally pushing on it and I can’t get it past the first slot lol

[@the_storm_ryder]

@@jwairsoft6911 yep same with mine, with all my strength i can't get it to budge, you managed to move yours yet?

[@jwairsoft6911]

@@the_storm_ryder yeah, I got a bit of sandpaper and sanded the mounts on the inside so it was easier to slide on and it works fine now

[@yourgamenews5045]

ПОМОГ