Found a much easier way to make rib or rings around lures using the forms section in Fusion 360. 00:00 Intro 00:14 Basic steps 06:23 Angled ribs steps 09:00 Curved and Joined Ribs
Пікірлер: 27
@EngineeringHooksets Жыл бұрын
Great tutorial. Thanks!
@FiishOn2 жыл бұрын
Great ! I was using the classic pipe function and the harder ... It's ancient history now thank you!
@nathanking24842 жыл бұрын
Thanks, great vid!
@miniproto47212 жыл бұрын
Thanks a lot.
@teamfishlineswfl90992 жыл бұрын
Nice work !!!
@FinancialFreebo2 жыл бұрын
Cool video buddy!!
@SUB133332 жыл бұрын
awesome!!!
@Fusion360School2 жыл бұрын
This is great. Hope that we will be able to select multiple disjointed paths for pipe in the future.
@WMBayouLures2 жыл бұрын
Thanks! That will be great when it happens!
@leonjnolte63382 жыл бұрын
I enjoy your videos on Fusion very much. With the open pore bait you have the flat part at the top and the body tapers to a narrow at the bottom. I want to create a triangle rib with a difference. The outside of the rib must start at the edge of the flat and grow out the body and around the other side and fade back into the body where it gets to the flat again.. how would that be done. Would like a video on that. I am new to Fusion. Hope my explanation is good....i am Afrkaans speaking. Thanks
@WMBayouLures2 жыл бұрын
Hey Leon I think I understand what you are trying to do. I am planning on making a video on open pour molds so I will try to do what you are asking.
@leonjnolte63382 жыл бұрын
@@WMBayouLures Appriciate
@jbay69462 жыл бұрын
I really need to what 3D printer and design program I should invest in. I’ll be a beginner at all of this.
@WMBayouLures2 жыл бұрын
I have had great success with the Epax e10 (I own 2 now) - gulfstreamoutdoors.com/epax that link should give you 5% off and I make a small commission. Design program I use is Fusion 360 and my tutorials are in this playlist - kzbin.info/aero/PLEdNibYdUWY4tPGBjgNSGM4auHUAMofuM
@PanfishingJournal2 жыл бұрын
Getting my Elegoo Mars 2 on Monday. Not bad for 100 bucks.
@WMBayouLures2 жыл бұрын
Awesome man. Can’t wait to see what you print!
@PanfishingJournal2 жыл бұрын
@@WMBayouLures A fellow Engineer is selling me the Mars 2. He only used it twice, and didn't have any use for it. Hopefully, I can get the software soon as well.
@SUB133332 жыл бұрын
any idea why i get - Not support projecting sketch geometry into same sketch, please change the target sketch or geometry. ? doing the same thing as you
@WMBayouLures2 жыл бұрын
Sounds like you are still in sketch mode. Draw the lines in a sketch Finish sketch Create a new sketch (same plane as previous sketch) Do the project in the new sketch
@emanggitulah43192 жыл бұрын
Try split surface instead, can do the pipes without getting all the cutoff bodies
@WMBayouLures2 жыл бұрын
Thanks will give that a try!
@magicshon Жыл бұрын
split face only works with one line at a time it seems, not usable for this
@thomaswellsjr95502 жыл бұрын
Can you build lures with the free fusion 360 download or do you need to buy it?
@WMBayouLures2 жыл бұрын
Free version goes everything you need!
@yauckoutdoors2 жыл бұрын
Nice approach. Sometimes fusion 360 is not bulletproof, you have to find a workaround to achieve what you need. I have some 3D mold design vids. Please check them out. Cheers!