Easiest Way to Memorize 4x4 Corner Parity (Tutorial)

[@yaboyacro]

thx so much,Jperm dint explain this parity bc he assumed that evereone did full oll,but im glad theres people like you that are willing to help us new speedcubers.

[@oscarvelocitymusic]

I love how simple and straight to the point this video is. Lighting could have been better but the video was made in 2013 and this guy probs didn't have any professional lights back then. I like that he explained what he was gonna do before he did it, so you know what to expect when following along and memorizing. Also he did it slowly so no need to slow down the video or anything. Big respect

[@treythefridge]

Yes

[@visvathomas.c7592]

The slow down part was because of his cube, but still great teaching done by him

[@oscarvelocitymusic]

@@visvathomas.c7592 ye

[@leahdavis9434]

You also forget what cameras looked like in 2013. Don't judge by today's standards

[@oscarvelocitymusic]

@@leahdavis9434 I commented this 2 years ago bud, I was less experienced in judging stuff y know? But yeah I agree with u

[@sherlock2020]

I used to think that I'll never be able to remember the algo for this parity.....but you just made it too easy.....Thanks alot :))

[@stash1306]

Yes

[@apros11]

The tutorial is to show you how to flip the corners to remove the parity. After that, it would the yellow cross in its correct orientation then solve it like a 3x3. I like this youtube channel coz its the only channel i see so far who explains clearly what is he doing before/ while doing it. So apart from memorizing the algorithm, you have extra context that helps you remember

[@hagr1t]

for all you guys that have diagonally corner parity, just keep one of the incorrect corners in the bottom right and do what he did. then just fix the cross and keep on solving as usual. i didn't see this posted anywhere so i thought i would mention it :)

[@obcraig]

good tip, thanks!

[@starblaze5813]

Whenever I do that, the two diagonal corners that were correct become incorrect, and the incorrect ones become the correct ones. So I'm continuing the same thing of switching between the two diagonals.

[@ThePunisher0313]

same here

[@AAGAMING-wy5it]

E

[@joezamudio6256]

Hagr1t

[@JoeZelMusic]

I sooooo needed this and it's super simple to remember because of your detailed explanation. I appreciate you mentioning that this only happens on the 4x4 otherwise thought I was going nuts 😁

[@replowlvl302]

Fr lol was like some had to have switched them because this never happens

[@aunikajade4417]

Yessss I went crazy too!! I actually broke my first 4x4 trying to fix it because I thought I broke it or something lol

[@OhSnapSon]

That is exactly what I needed! Now I can solve the 2x2, 3x3 and the 4x4 cube all thanks to you! You are the master! I'm ready for the 5x5!

[@riceyrice]

just a note the 5x5 has no parity of this sort :) just an "edge paring parity"

[@zgurubaburul]

what about 1x1?

[@meowBlitz]

DeathMetalGD Ay GD player

[@clementwong6213]

Thanks for making it so simple, now I know how to solve all the parity because you explain things so well!

[@bullseyetag01]

Thanks for this. HUGE HELP! Have you thought of redoing this and making it current? You do an excellent job simplifying this like no other channel has.

[@wiyadaboonmeebut8710]

So far I understood your crop tutorial, 4x4, and more.Your the best!

[@freaksterx8]

Thank you soooooooooo much searched and saw many trash on KZbin but urs is the best bro even after 9 years. 🙏🙏🙏

[@priya_manocha]

You're the best..I was able to solve this last two corner PARITY..and the 4 by 4 cube for the first time ever..I will remember this day forever 24 August 2022 ❤️❤️❤️👍🏻👍🏻👍🏻

[@chaithrakg2285]

Thank you so much!😍 I struggled even after watching so many videos, but I finally understood. Your explanation was clear and easy to follow.

[@TEAMUNICK]

By far the easiest video available on this issue great man 👏👏👏👏

[@kar800000]

I watched a 4 minute tutorial with complex algorithms, didnt work, this one did though, amazing and simple! works like a charm!

[@jacobgreen6899]

The algorithm stars at 1:21

[@MsNanite1]

I'm so glad this is still up, I forget some of the simplest things. I had a corner parity my son of mom puzzle, which is basically a 4x4, and I was sharks that I could not remember how to fix pack parity. LOL I was trying to include the bottom layers, back layer etc. ThanQ for this...

[@shwetakataruka9583]

You have posted additional videos from which we got help and was excellent

[@K4ZZYb]

hey could you help? when ever i insert the white corners on my 4x4 the insert flipped, lets sat its a red, blue and white corner piece on the white part the colour would be correct but on the red side it would be blue and on the blue side it would be red?😭😭

[@ernestocortez5820]

Litteraly so simple every single other tutorial channel treats this actually fairly simple algorithm like it’s something the professionals can only mster

[@brandonsulkar770]

I was solving the 4x4 for my second time and I ran into this parity thank you so much for helping

[@subhamsamal9282]

Bro u rocked it.. u r my teacher ^_^ u thot me 3×3 now u thought me 4×4 n now i cn solve 4×4 in 1 min ^_^ tysm

[@alredmenezes2349]

*taught

[@cheku3518]

HOW! IT STILL TAKES ME LIKA HALF A HOUR

[@ValiantNoob]

this may seem stupid. but i try to do the 3x3 method of solving my corner pieces but it does not work. there is no parity involved either. i have my corner pieces in the right spot but not correctly situated.

[@jtothej8675]

THANK YOU SERGS B,YOU ARE AMAZINGLY! YOU TOUGHT ME HOW TO DO THE 2x2 the 3x3 AND NOW THE 4x4. I'm going to watch your videos all the time.

[@homehome8066]

Until you notice this was his last video. Hah

[@KeithGeronimo]

TNX THIS IS SIMPLER THAN ALL THE PARITY TUTORIALS ON KZbin!!!!

[@Rint29]

bro best video out here

[@jimmycake2167]

You are the best teacher for cubes ever!

[@blugie9684]

Jimmy Cake yes he is best teacher ever all the time

[@akhillingam7008]

I agree with you

[@olicool476]

thanks man, I don't like to read these algorithms I always preferred to actually see them so its a nice tutorial for me

[@diamondcrushers523]

This was extremely easy to memorize took me only five minutes thanks so much

[@nitorikinni488]

I used this for the 6x6 but just doubled the wedges and it worked. Thank you.

[@guywhoplaysbass]

1:19 to skip to the tutorial

[@thomaschumbley3685]

My son subscribed to your channel and is going to Southern Championship thanks to you!

[@Vladipiggy]

I have never ran into corner parity. Is this just an extra thing for speed solving that I miss with my beginner solving or am I just lucky?

[@harishapayidimarry47]

Thanks bro.... i saw so many videos but none worth for me. With your video i able to solved.

[@UniversalSaad]

Wonderful bro! I have been searching for this parity problem for a long time and waste 350 MB for this🙁...But in vain.At last downloading your video I have learned it within 50 seconds!Thanks again...❤

[@VICSOMEDAY]

thnak you so much !!!!! all i needed was the corner paridy :) either a tperm or a jperm for edges after :)

[@kid31gameplayer93]

I too have a problem. I tried your trick on solving the corners, so I made it until when there were 2 corner that are in the correct place and two corners in the wrong place. So I tried the exact same algorithm tons of times, but sadly it stays the same. Please help me... Until now, I still do not managed to solve 4x4 rubik's cube because of this. So after a while watching your videos, I decided to restart them all up by pulling the pieces off and re-arrange and solved. After that, I tried to retry the algorithms again and again, but it doesn't seemed to be solved.. If anyone knows please do help.. I have no idea how to solve it. Please reply :3

[@adumont]

Thank you man! I was about to disassemble my Revenge Cube!

[@johnstephenancheta5880]

Wow, i can't believe i found this video. GOOD THING. Cuz i skipped the 4x4 and move on to the 5x5 solving. GOOD THING that i finally found the problems. Thx mannnnnnnn!!!!!

[@chezwi]

Thank you! You make it so easy. You’re a good teacher.

[@101hornbill]

like you said in the video , either two corner would be placed wrong, in my case two of them are placed wrongly but they are at the opposite corners of the 4th layer, what should i do? please help. i have use your technique and solved the cube earlier a couple of times but sometimes the above situation arises and i have no idea what to do...

[@dankerinodrummerino7989]

Thank you veery much, got stuck on this like four times in a row and got really frustrated...now I've finally got the 4 by 4 solved ^^

[@opalbaune5635]

THANK YOU. I could not find a video that showed how to do this.

[@birdboys1877]

Ok so I'm really close to solving this thing but I've run into a corner parity i can't figure out. I have the full black/white, and almost everything correct. My problem is that I have 2 corners that are out of alignment. My yellow red and green corner and my yellow orange and blue corner are in each others places. You covered corner parity when they are both in the same face, but what do I do when they are on opposite sides of the cube? Please help I really want to get this thing solved! TY!

[@MrCyanGaming]

What about the corner parity for swapping 2 corners? I have the whole cube solved except for 2 corners, but the yellow side is complete.

[@knowlann2204]

CyanGaming | ᴹᶦᶰᵉᶜʳᵃᶠᵗ ⁻ ᴳᵃᵐᵉᴾᶫᵃʸ hold the 2 misplaced corners facing you and do the algorithm from the video. Then solve like a 3x3

[@smoothmarkymark7100]

This video literally shows you how to swap the corners. Once you copy this parity algorithm you then treat the cube like a normal 3x3.

[@nameisbhishma]

this is really easy algorithm to solve top corner parity

[@MagusApex]

finally..i found this channel again!

[@olivercasey186]

Finally! I have just solved the Rubik's revenge

[@JasonLawrenceJones]

I had a strange thing happen on a 4x4 cube. I had just one cube in one corner not oriented correctly. I have pictures. So, I mixed it up and tried again...believe it or not, I had the same exact thing happen, but with a different color cube. Is that considered a parity?

[@chaitanyaagrawal4661]

Didnt work for me.... Dont know what I am doing wrong

[@robbobstone]

Thank you! I don’t know why but every time I solve my 4x4 this happens and when I did this and then got the top middles back it solved it!

[@ockertoustesizem1234]

i learned the last layer of the 3x3 from you. and reduction method for the 4x4 from you. once i get my hands on a 5x5 im going to watch your 5x5 video.

[@ockertoustesizem1234]

i learned 5x5 now

[@garyb1157]

Wow - Thanks man ...this is the easiest one so far !!

[@hostilefishgames4611]

I went from corner parity to pll parity with this

[@3DSnips]

my cube was almost solved just had 2 cornors misplaced now they are fixed but other 2 are misplaced

[@javiersds8081]

Thank you! I did it in no time thanks to your video.

[@itsisk2043]

I use to have a two corner parity on the same side (not opposite corners). Is there an alg for that?

[@ivanbisko3390]

You are the legend!!! Your method helped me to solve my 4x4 every time

[@A_M0rE]

Worked like a charm. It is so simple to remember as well. Thanks man for the video.

[@enthumg2449]

it is amazing.I loved your channel. And as you told that some parts of 3rd layer are messed, it happened but when i solved the corner parity were no longer.

[@Tangesther4]

how do you know if your 4x4 rubik's cube has a parity?

[@albertoflores3]

ok, so I get to this part but no matter how many times I try and run this algorythim I'm unable to align the actual corners. I either get all for corners in the wrong place, or I get two corners (which I place in the back) and two that are in the incorrect place. When I do the algorithm and then fix the cross again, they then go back to being all out of place (the corners, except for one). What am I doing wrong? Also I notice that in this video in the final step you rotate the top two layers but in the linked video showing the original solving you only rotate the layer right below the top instead of both at the same time. Either way, I tried both but to no avail its not working. On the bright side, at last I haven't messed the rest of the cube which means I must be doing something right...right? Please help =)

[@mohammedmama8512]

Thank you sergs B for the tutorials Can you upload a megaminx tutorial?

[@unknownb9471]

Thank you so much for solving this problem 🤩🤩❤️❤️😀

[@rizaldygain5735]

Thanks for this I have completed the 4x4x4 finally and its easy

[@paulbuilder4550]

ive done the yellow cross but my orange and blue edges are inverted what should i do the green and red are correct

[@TraceguyRune]

You can rotate the inner pieces (wedges) faster if you do a wide turn and then bring the left/right back up.

[@Vumbun]

It worked in other situations too.. i appreciate it man.. thanks to help me..

[@arpitpatel83]

Assuming this applies to 6x6 as well?

[@JesseLynnFLIP]

What happens if you only have 1 correct corner?

[@Love_Those_chicks]

Same as a 3x3

[@ritujain2429]

Best cubing channel

[@zynnauf5259]

Very easy. Thank you for explaining it very easily

[@titanrex0513]

Wow! This is actually really easy to remember! Thanks

[@Ascendantt]

i have all of them in the right position but not the right orientation, what do i do

[@abdulsamadsalam8683]

thanks you saved me a lot of time!!!! form 2021

[@ben_ja_man5219]

Thankyou so much man, i solve 3x3 fridrich method, so i got a bit confused, but this works out perfectly :D thanks so much.

[@RogueGamingMC]

Dude, AMAZING tutorial, it helped a lot, and there were some cases i got that weren't in this video, but some of the other algs you used worked for them so thanks man, im looking forward to your 5x5 tutorial

[@MrJacktaylor96]

I have 2 corners correctly placed with two wrongly placed, as he says. But i do this algorithm and it just messes up all the corners. it keeps going around in circles, 2 corners, no corners, 1, 2, 0, etc. HELP!?

[@jacobf7409]

This helped so much with my 6x6 :) thanks.

[@gsdeluxe9640]

A real video that actually works thx soo much

[@tastybison138]

i have the yellow cross, but i cant get the correct edge pieces (not corners) in the right spot. Like i have green with green, and blue with blue, but then the red pairs up with orange and vice versa,

[@JACKSON-rh7nf]

Does how you hold the cube matter?

[@lakshaymd]

Can you please please please make tutorials for Fridrich method? I know the f2l but no video is explaining oll or pll well... Please reply.

[@hectormayoral9836]

r2 U2 r2 Uu2 r2 Uu2

[@pato20995]

The video so useless lol

[@timothyalpert1388]

Bro i've been trying to find this for weeks you are DA BOMB

[@tpdghost4944]

THANKyou for this

[@Dreazy]

r2' U2 r2' Uu2 r2' Uu2

[@Anita-ne6cs]

Thanks

[@astitvagupta5016]

Sir, I have all my corners placed correctly, except one. One is placed correctly but not turned correctly. Can you help?

[@scorch855]

ASTITVA GUPTA you likely had a piece flip while scrambling or solving. This is an unsolvable state as far as I know so you will just have to rotate the piece manually

[@astitvagupta5016]

Thanks, sir!!!

[@scorch855]

ASTITVA GUPTA happy to help :)

[@trajkiran007]

Thanks a ton.. that's the simplest solution I found. thumbs up !

[@mussyhall]

Thanx man. Very clear and easy tutorial. Finnaly got out of the paridy.

[@khushiaryan518]

i am stuck at this parity thank you very much:)))))))))))))))))))))))))

[@sampathkumar1253]

Man You are Best.....I'm struggling to remember complex algorithm to get rid of this..Finally u made..U r the BEST!!!!!!!!

[@aditigupta7711]

Hey.. your methods are lot easirr and really helpful but m struck at the end when we solve the corner parity by your method and the edges got flipped ... kindly tell me the way out... please please

[@NishuGiri-z1i]

If this formula corner will not match so what we will do .

[@kd5540]

Thanks for the video..I am in final lap.. Where the Final corner pieces are at right place but flipped... The usual steps of (Ri-Di-R-D) doesn't help even after n number of times..

[@45gr]

you helped me a lot thanks!

[@renkotrader8889]

Can you please show us how you use the same method on a 5x5 or 6x6?

[@GloriaKhatri]

easiest method sir.. you are great!

[@willm857]

Formula?

[@JGKski360]

I'm very confused as to why a corner parity is a thing. Can't you just switch the corners like you would on a 3x3? By this I mean doing the righty alg 3 times, spinning the cube 90 degrees clockwise and then doing the lefty alg 3 times?

[@ammualekya]

Omg thank you sooo sooo much I have been struggling for this long time. Thanks you☺️

[@RealMorphy]

What is your pb in 3x3x3 rubiks cube

[@vishuverma5632]

Will this work for 5 by 5