4x4 EASIEST Method! (Reduction Method)

[@Jzch30]

Use this Algorithm On pairing edges when Like the Blue/Yellow corner are on the same slice(Side) Algorithm: Dw R F’ U R’ F Dw’ Note- Any notations that have “W” In It means two layers

[@Jzch30]

Like at 6:50

[@kool126]

Thanks!

[@kaifahmed2007]

You should have used a solver

[@melissadevine1855]

@@kool126 he’s coming call hb yet we has it nyp

[@scottsaldivar8599]

W stands for wide

[@annchapmanprice4937]

This video is SO HELPFUL! Thank you! I've tried several other tutorials for the 4x4 cube, but only this one went slowly enough for me to follow each step. Using this video, I was able to solve 4x4 for the first time. Thank you so much!

[@demirelnes]

Thanks, bro! This video is the easiest and best one. I learned how to solve 4x4 within one day.

[@babilonios]

Thank you, it makes solving the 4x4 very intuitive and funny

[@Learn_The_Cube]

Lit

[@babeewoda8316]

edge pairing parity alg: Uw' R U R' F R' F' R Uw OLL parity alg: Rw2 B2 U2 Lw U2 Rw' U2 Rw U2 F2 Rw F2 Lw' B2 Rr2 PLL parity alg: r2 U2 r2 Uw2 r2 Uw2 Note: any move in lower case is the inside middle slice that corresponds to that move.

[@Apexjojo-z5j]

even though it didnt help me i still wanted to say thank you for atleast trying to help me

[@glitchedfire8074]

This was the best which helped a lot starting I couldn't solve even with the algorithms but that problem happened with me on 3x3x3 long time back and it was my mistake but to be true this helped a lot deserves sub deserves like

[@ibrahimahmed-oq4lg]

Amazing tutorial! I was having so many problems but this explained it clearly thx.

[@MrNoob145]

Still learning how to solve it, well memorizing the algorithms. But while memorizing the last algorithm 2 corners are swapped form the colors they were supposed to be.

[@Learn_The_Cube]

It flips two corners yes, just figured that wouldn't matter

[@farahahmed3979]

finished the center part and i gotta go sleep, boy’s i’ll come back tomorrow, by the way can you make a tutorial with the algorithm for the centers if you haven’t? Thanks for the help too! “You officially achieved me as a subscriber.

[@frankkrischick3906]

the better algorithm for solving the last edge pieces is Dd means 2 layers bottomside yellow side clockwise when observing it then go back to the slice side then perform the " Dd R F' U R' F Dd' " Algorithm because this version is shorter

[@frankkrischick3906]

thanks for this tutorial i can master this cube now unless i run in the OLL Parity when i solved two layers (3 when seeing it ) and have the cross having one corner pair flipped.

[@piqle5242]

There is an error that you can run into on your last layer if your using beginner method that my dad ran into . Basically, when your matching up the corners, sometimes there will be 2 corners matched and no matter how many times you do the algorithm, they just stay the same. Please tell me how tp fix 🙏

[@-VX-7]

Trying to solve right now and that's how it is

[@ferpolly19]

Try doing the last alg, it happened to me and I could solve it

[@sminhas38]

yo i really wanted to ask u something i just dont understand, after you make the yellow cross on top, how are you supposed to solve it like a 3x3? i dont get it

[@malakaijaxen]

You get a thumbs up and a comment for the very useful tip at the 9:25 mark.

[@liamv9143]

You have helped me out a lot thank you very much

[@kinosaurs515]

Wow! Thanks! My 4 by 4 cube was sadly unsolved for months when I failed. I came back again and solved it! I will probanly need to use this video again though.

[@xlouq]

use aSolver ios and android (i think).

[@Martin_A0627]

thank you for this tutorial now i can solve the 4x4

[@líng_Yá0-g8c]

This is the best video I have ever seen

[@jayden-y4r4i]

I learned the 4x4 in about an hour, dude now the 4x4 looks soooo easy man........

[@elmo6844]

... help?

[@Learn_The_Cube]

Nice

[@valskis8877]

Me too bro, learnt so quick

[@adityakapadia6380]

@@valskis8877 Yea if u know the 3 x 3 inside out it will not take very long to learn. The only issue for me is memorizing the parity algorithms.

[@cmtg461]

Me too just 2 days for me cause the first I was tired

[@Liberty_Freedom_Brotherhood]

Brilliant video and clear instructions 🙌

[@Skynimi]

Ty for teaching me edge pairing for 4x4 I got PLL parity in my first solve XD

[@dennislygnos7801]

THANK YOU SO MUCH YOU OWNED A SUB!!!!!!

[@ethanhunt5372]

Hey at 8:29 how do you set up both the edges like that? (Green orange and green white?)

[@RamachandranKandiah]

Thank you for your easiest method to solve the cube

[@МилкоДюлгеров]

Thanks dude all the other tutorials were rushed

[@Spiral-Justice]

How do I take the centers off help my color scheme is wrong

[@Learn_The_Cube]

Yea

[@wrdsssssssss]

bro you have teached me 4by 4 cube ,thx a lot

[@eetulae]

Thanks! Now i can finally do a 4x4

[@CasualGamer1000]

Thank you learned it in a few hours

[@gingirylego]

11:54 bruh u just messed up my cube ._.

[@Learn_The_Cube]

I mean I was doing it fast at that part just watch the 30s before that

[@gingirylego]

nvm i just solved it lol i figured out my problem, thanks

[@bhumidave5783]

Please film another video on edge pairings 4 by 4

[@Learn_The_Cube]

Why would I do rhat

[@infestedgaming3701]

how do i orient the corners for the last layer

[@Jaxdeharder]

Thank you now I can solve the Rubik’s cube

[@andrewwatkins4852]

Got my 4x4 on my birthday this year and solved it the very same day

[@gdswitchz]

thx you so much you helped me on 4x4.

[@-VX-7]

Keep running into the same problem when you do the beginners method for 3 x 3 it will leave two corners, not in the right spot, but the rest of the cube solved.

[@Umesh_is_cool]

u forgot to go over a case for beginners method when you're doing niklas but there's only 2 corners solved and the others wont solve.its a case I get a lot.u should go over beginner method cases too.

[@Learn_The_Cube]

what

[@mayukhakalluri7732]

Can I know step of how solve 3x3. I didn’t quite understand it.

[@LilyRiesenfeld-qk4sy]

Great tutorial

[@cadgi3094]

Idk why but whhen i keep solving the 4by4 long enough and then solve a 3by3 the 3by3 feels so small

[@noobwaze8194]

Could you redo this tutorial but when paring your last two edges actually explain how to pair them?

[@Learn_The_Cube]

Uw' R U R' F R' F' R Uw I believe

[@door3545]

e

[@SamiPlayz]

@@Learn_The_Cube how do you read those codes

[@Learn_The_Cube]

@@SamiPlayz if you don't know that, then you aren't ready for the 4x4

[@joevecalleja3965]

My son have a 4by4 rubrics cube got a diffictcult to solve hard to solve thank you..........

[@allenji3095]

THANK YOU! YOU HELPED ME SOLVE THE 4x4!!!

[@bobreallydraws1-7]

is it possible to have 3 broken edges?

[@Learn_The_Cube]

Yes

[@bobreallydraws1-7]

thank you!

[@aleksandartanevski1911]

How do i solve the second and third layer without breaking the edge pairs

[@Learn_The_Cube]

What

[@hibikikiyama5499]

You turn the outer layers

[@whirrrl]

hey man, i have a problem i have 8 edges paired up, all 8 on either the white or yellow faces, but i cant pair up the last 4 without either breaking an edge or breaking a center pls help

[@Learn_The_Cube]

Well "breaking" a center should never be an issue since you move it right back anyway. You don't have to place edges immediately in their correct locations so the 8 paired being white/yellow has no bearing on the edge pairing phase. I suggest rewatching those pets of my video, you may be over-complicating things.

[@whirrrl]

@@Learn_The_Cube thanks man

[@dabooya6941]

Thank you for marketing me solve my first Rubin cube 😀

[@mercedescolla8671]

good job you are amazing

[@gmboyd07]

Thank you sooooo much

[@saadkhalid371]

8:45 edge alg

[@claudiamontoya903]

i think this is the best 4 by 4 method for me! sorry j perm but i hink this tutorial is a bit better

[@cmtg461]

Do agree

[@AlvinRyu12]

Same

[@GOATED-NF]

This tutorial is for the beginner method. J perms tutorial was for a more advanced method He never made one for the beginner method for some reason.

[@jessiemau5879]

What if you need help in the end?

[@Learn_The_Cube]

Cri

[@lightningbeast2291]

So helpful love it

[@lightningbeast2291]

Thx for the heart

[@dominikpecuch2177]

How about corners on last layer, when you have 2 incorrect?

[@Rocketleagueclips5121]

I'm stuck at 5:57 I have a chequer pattern for green and orange and idk how to solve it please help

[@Rocketleagueclips5121]

Pls answer me

[@Learn_The_Cube]

Honestly just don't think too hard and kinda just shit around center pieces until it works. That's what I remember doing the first few times solving it and it works fine

[@Rocketleagueclips5121]

​@@Learn_The_Cube Bruh

[@Learn_The_Cube]

@@Rocketleagueclips5121 what do you want me to say, you gave me a vague question. That's as much as I can give

[@bluetuberthesecond4830]

What happens if I have one corner pair flipped?

[@Learn_The_Cube]

What

[@bluetuberthesecond4830]

Nvm I know now

[@xlouq]

tysm now I know how now I know how to solve megaminx pyrminx 2x2 3x3 ivy cube and 4x4 YAY

[@kareemamin3743]

pls help me how do i just do it like 3x3 wdym everyone says this i dont get it

[@C-a-i-n-e]

hi

[@themusicalsnailman]

I'm only getting 1 broken edge on top. Not 2 or 0. And if I try to pair anymore it will break my centers and I won't get them back

[@Learn_The_Cube]

Lol each edge is comprised of two pieces. It's impossible to only have one broken edge??

[@themusicalsnailman]

@@Learn_The_Cube How could it be impossible if it happened

[@a_mix_of_mischief]

I love the intro

[@Abu-wp4ui]

Thank you broo..

[@Thisisnormalfnaf]

Can someone tell me how to solve the last four edges i got stuck on it and every time i try to do sonething nothing changes

[@Learn_The_Cube]

Just solve them one by one and do the alg for last 2 edges if you need to

[@Thisisnormalfnaf]

@@Learn_The_Cube thank you

[@IMP-sz8et]

The orange and green part of the cross is done but the rest of the cross is mixed up pls help

[@nishabakrudeen7522]

How to solve the corners at the end?????

[@shengmingge8330]

i haved subscribed

[@danielgillem-xq9xc]

I can’t do the center pieces for yellow and white

[@Learn_The_Cube]

What seems to be the issue

[@danielgillem-xq9xc]

I try to do the yellow corner, but when I try to fix white, it messes up yellow

[@Learn_The_Cube]

@@danielgillem-xq9xc that's why you insert pieces more or less one at a time, fixing white after every insert

[@micaicofey1416]

Whenever I they to pair them the centers keep swapping

[@offlineoak8798]

I keep getting stuck on the last 3 edge pairs

[@Learn_The_Cube]

Combine two of them then you only have 2 edge pairs

[@glitchedfire8074]

Op bro helped me loads

[@Vinnysim]

Umm one two of my corners are switched so do i have to resolve

[@rivktwin7891]

Yeah I have the same problem I have no idea

[@giannamichaels9010]

This method is so much easier than the Yau method, thank you.

[@henrystudiosyt]

11:10 parity

[@nishabakrudeen7522]

I don't know how to solve it after the 3 by 3 part

[@Pythonado]

I only know the beginner method for the 3x3 so when a parity happend you said solve it like a 3x3 but parities never happen on a 3x3

[@nickhuynh6517]

PLS MAKE IT SIMPLER IM STILL SOLVING IT AND IM ON HOUR 2😢

[@Sans_summoned_329]

No help, how to get more than 8 edge pairs?

[@mercedescolla8671]

why did you just ski a whole bit?

[@Learn_The_Cube]

What

[@sayedmasood2323]

BRO WHAT DO U MEAN BY SOLVE IT LIKE A 3 BY 3 I DONT UNDERSTANDDD

[@jyothijale7763]

My only problem is first step I am not able to put centers

[@Learn_The_Cube]

Cri

[@andrewwatkins4852]

just solved mine 4x4 in no time flat a pll/oll skip

[@Jasperfortnity]

Oll parity = 11:10

[@elijusgustas6460]

i solved at the end like a 3x3 now 4x4 corners are weird its not solved

[@nishabakrudeen7522]

Corners????? Plss

[@javingoh751]

Um...i know how to solve a 3x3 but the last step is different from my step to make the 3x3....

[@Learn_The_Cube]

Huh

[@salamantic9982]

U prob ain’t gunna see this but why are the first corners the wrong way round I tried with beginners method and f2l

[@Learn_The_Cube]

Hmm I'm no sure what you mean "wrong way round"

[@salamantic9982]

@@Learn_The_Cube like I’ve done the cross but when I do the corners. For example the blue and orange corner the orange part is on the blue side and the blue part is in the orange

[@salamantic9982]

@@Learn_The_Cube is the cube broken or smth?

[@Learn_The_Cube]

@@salamantic9982 you must have done the centers in the wrong order around the puzzle

[@salamantic9982]

@@Learn_The_Cube but red is opposite orange and blue is opposite green isn’t that right?

[@ritikasharma8997]

Thanks

[@jeremiahinnocent2420]

You didn’t explain how to solve the 4 yellow pieces without breaking your 8 edges that are already paired up

[@joaquinayala1125]

I’ll comment back when I finish solving the cube!

[@aridruaad7203]

can u do it slowly plz -_

[@Learn_The_Cube]

Wdym this tutorial is already way too long

[@AnnNjeri-cv9md]

Please do it slowly and show the steps

[@Jaxdeharder]

You are fun

[@mariannashapiro7621]

just memorize it with bogr/ Blue Orange Green Red

[@anuragroopam]

good

[@saanvisivakumar4627]

i get confused while doing the yellow center and i still cant do it 😭😢

[@Learn_The_Cube]

Erm

[@kenaoki2869]

the best

[@Blakecool569]

I still dont know how to do the middle layer each and every tutorial does not solve the 4 by 4 middle layer on camera :/

[@shengmingge8330]

my dad knoss how to slove the 2 by 2 and 3 by 3

[@Learn_The_Cube]

W

[@BlCKuT-nv8gv]

I’m stuck on two colors and I don’t know the algorithms to it…. It’s two oranges and two greens…. They’re opposite sides of each other and I don’t understand how to align them up..!! Is there an easy way of figuring out how the moves work..?! Anyone…?

[@Learn_The_Cube]

what do you mean colors, the whole thing is colors :p

[@BlCKuT-nv8gv]

@@Learn_The_Cube ORANGE AND GREEN..!! TWO colors on a SIX colored CUBE..!! WHICH I ALREADY SOLVED, BY THE BY…. Lol..!!

[@Learn_The_Cube]

@@BlCKuT-nv8gv 6 colors but theres 56 pieces on a 4x4 so i still have no clue what you mean

[@ninometreveli3709]

I had the EXACT SAME CENTERS

[@Learn_The_Cube]

Real

[@ninometreveli3709]

Yes