Easily Replace The Belt! Poulan Pro

[@TarylFixesAll]

NEW Taryl Tees, Tools & More! Support the channel and grab some Taryl Apparel today! www.TARYLFIXESALL.com

[@mikemelanson6259]

I absolutely love your videos! They are entertaining, funny! I can't get enough of them! But the best thing is that you are a great teacher! You have a way of making small engine repair easy! You teach from experience! I was always intimidated by carburettors and ignition systems, but you made it easy and fun to learn! Thank you for the Chanel and keep them coming! A new Grass Rat from New-Brunswick, Canada!

[@mattchastain4269]

I'm a new grass rat here. I really enjoy the videos! The details on the demonstrations are excellent, and very helpful! I've used the information to fix several pieces of equipment myself. Keep up the good work!

[@hunter7476]

Nice glad to see another grass rat

[@Jerrylb]

Welcome my friend good to 👀 more subscribers it's definitely a great channel

[@tonysheerness2427]

The simplest of doing something can be very difficult if you do not know how, that is why we watch you.

[@kurtfirestone2761]

I bought one brand new 4 years ago and haven't had a lick of problem with it runs great

[@somasmith]

The subtle wet fart sound fx played every time 💩 is mentioned gets me EVERY time. Keep up the great vids! ✌✌✌

[@stoveboltlvr3798]

You're the best Taryl!. I really enjoy your channel.

[@RaysLaughsAndLyrics]

Kinda early for dinner here.. so.. thanks for breakfast Taryl.. BTW good time on the belt replacement... you are a natural for calf ropeing.

[@TheChube25]

Happy Birthday Taryl!

[@SaskDad]

Perfect instructions. Thank you king! ❤

[@markk4300]

Boy I bet that snowblower got a workout yesterday! Could of used it on I 65! As always a great install video.

[@kbasham03]

Can you show how to properly adjust the speed on that POF? I have the Part-on variant and its god awful slow in reverse and not fast enough at full speed. The friction wheel needs to be adjusted, not sure how?

[@mlb4946]

at 3:08 in the video, the silver belt drive, the circle thing you are putting the belt on, do you know how to remove that, im trying to replace my impeller and cant figure out how that comes off other videos have a bolt or screws holding it on? thanks for any info

[@bmish1825]

what about the traction belt?? Idler arm bracket is fighting me yet looks so simple... Thanks

[@sharonronkin586]

Any chance you know how to replace an auger blade on the Poulan Pro?

[@rayryngaert3769]

Right in time for that snow we got yesterday

[@charlieseymour5489]

Where can I get a heat shield muffler cover like the one thats on it I can't find one anywhere part number in the manual says its not available anymore mine broke off where it bolts to the head of motor now it just rattles

[@CanadianBi-WeeklyInvestor]

What's the belt size? Can't find that info anywhere

[@t-bear1863]

Happy (late) Birthday Taryl

[@patbfd]

Happy Birthday!

[@debbieandmarkhoward2644]

Excellent videos. Keep Elkskins on his toes.

[@jmpaq51]

thanks, I have the exact same one. The belt I bought on Amazon was too tight and burned out real quick. Any idea of the precise length of the correct belt?

[@charlieseymour5489]

Will that belt fit a poulan pro 24in cut i have the same snowblower its 24in wonder if the belts are the same and if the drive belt same too

[@danieljensen2427]

Hi Taryl, is the part number the as 524 model LH195SP? Sure would be nice, the one your working on there looks a little bit bigger. (According to the RepairClinic it does not. )

[@andrewsmith7367]

I was given a poulan blower . It is missing the belts it is 4wd 9.5hp with a 27" cut. Where would I get a manual.

[@brandonlaw2010]

These are also made by Jonsered, same thing just red. So there's an orange one, red one and black one. All the same POF.

[@mcarroll598]

Does this POF have one of those really nice Made in China Honda clone engines on it?!

[@chrishall8142]

Hi taryl Love your videos been watching for years Have you ever put a sleeve in a v twin engine ? Can’t buy a Kohler here in Australia Till 2023🤦‍♂️ Thank chris

[@richardball8880]

New shirt is awesome 😎

[@DavidBrown-lq2qp]

Happy birthday!!

[@deanmoore420]

Nice job you did a great job 👍

[@stumpyssmallengines]

taryl thank you bud without you i would of scrapped loads of stuff thank you have you done a charging system on jd 110

[@styga1969]

Doing /rebuilding a Parker wheel motor. I should start doing some vids.

[@freetolook3727]

Snowblower doesn't look like it has very much use. How did the belt burn out so fast?

[@DIYVariety]

Taryl hey l got same one, I just take belly pan off on bottom and don't need to split it. Cheers

[@kellypowers8177]

Awesome - thanks

[@jensenwilliam5434]

Thank you!!

[@chriswagner6310]

Stop it guy you're cracking me up😂😂😂😂😂😂

[@mr.boshark8330]

Yo! Question for ya...what brand(s) of 2 stage snow blower would you personally buy if you were in the market for a new one? Just using it for home use but don't mind spending the money for a quality machine. Thanks!

[@james1795]

With these gas prices. I'm shoveling now. Let's go Brandon. F.J.B.

[@ElainesDomain]

@@james1795 I agree

[@markwitte303]

@@james1795 fuel price has nothing to do with who is president. simple economics of supply and demand. all the more reason to go electric and leave petroleum for power generation.

[@james1795]

@@markwitte303. HaHa! Too funny! You are one of the gullible, brainwashed Joe "fan boys" that believes anything the democrat politicians tell you. Sad, very sad. You followers actually BELIEVE the lies.

[@johnratcliff9024]

It has everything to do with sleepy Joe, FJB

[@safetyharborfirearms]

I like that shirt

[@johndii2194]

Why do the belts wear out so fast? I have an old Craftsman and I have to replace that belt once or twice a year. The drive is 7 or 8 years old.

[@mtwseneca]

Look at the alignment. I have redone a few curb sale blowers and rarely is a belt bad. The idler bracket that swings the idler to engage the belt may be out of kilter. I actually put a large flat washer behind the big pulley to bring it into better alignment than it was from the factory. A straight edge on the edges of the large pulley should come to the drive pulley in a parallel manner. Mike

[@matthewnelson5472]

Excellent dinner! Sad to say the higher end machines aren’t really much of an improvement over the Poulan.

[@leepatton1180]

I did a little snow back in the 80s

[@krisanderson997]

For a POF they sure made the auger belt easy to change. Maybe its not that reliable under the pressure of heavy snow, or neglect. That really was a quick replacement. Im not familiar with that brand.

[@JeffreyStrader]

TARYL DO YOU HAVE ANY PLANS TO WORK ON ANOTHER MOTORCYCLE OR MINIBIKE????

[@gillgetter3004]

Did belt on my old Ariens this year. That poulan is easier!!

[@Icehso140]

Nice easy fix. I hate those cables on that type of machine for directing the chute. I would love to find a direct shaft and crank replacement that I can adapt. Anyone?

[@brucegordon6309]

Good video

[@johnbecker1395]

We need some official P.O.F stickers in the Taryl store.

[@kjell-richardlvdal373]

I always use cevlar reinflorced belt much stronger than ordenary belt

[@brandonlaw2010]

I just replaced the auger cable on one of these steaming piles of excrement. No rust, machine like new, still wouldn't go back and forth in freezing conditions.

[@abdalqadr1]

Smart man

[@lynnh7694]

You split that unit like a Mellon. You forgot to give us an E-SKINS after assembly, fire it up fire it! up !

[@williambrasker7230]

Need more videos guys more more more

[@mrpcakes]

you can knock the poooon but mine has been running for close to 18 years. just needed some tire air and thats pretty much it... yep didnt even change the oil ROFL sams club win!

[@styga1969]

Your correct. Some you can take the belly pan off and sneak it in there.

[@badtothebone346]

That looked kind of scary when you split it but that turned out to be quite simple. Thanks.

[@billsimpson604]

It never snows here. Yet I find myself watching Taryl. Maybe it's to see his perfect teeth?

[@ihus9950]

👍

[@genesloan3175]

Easy Peasy!

[@patthesoundguy]

I put a cambuckle strap from the auger to the handle when I do belts on those, so I can just pull on the strap and it holds the halves exactly where you want them and you don't have to hold anything.

[@davidstake6857]

That was so easy, you should have let little Johnny do it.

[@Don_ECHOguy]

Now that was quick and simple. I have a very nice 1986 1026 John Deere snowblower that takes a little over an hour to change one of these belts. You have to loosen the belt tensioner totally and remove five belt keepers. What a pain in the ASS!

[@mr1pearl]

Gotta admit Taryl even I can do that !

[@jeffwilson1693]

only tool needed is a BFH!

[@bcad4066]

"Be careful of the cables" as he stretches and breaks the end of the auger cable.

[@NY411Info]

If I'm gonna buy a inexpensive machine it'll be a MTD for me. As long as it is the MTD with the friction drive. No freaking chains or hydrostatic crap. Oh and non with junk cables. My MTD's all have a crank handle and manual shoot , they do have cables for the actuation of the auger and transmission. However they are not sheathed cables, they are open cables with pulleys . I also have an old Toro that still works. NO cables at all. My $00.02.

[@kjell-richardlvdal373]

👍🥇

[@tonyc.4528]

Only buy Ariens snow blowers, the rest are just trying to be the original. It'll cost you a bit, but with proper care, it'll last for your grandkids to use one day.

[@papilocsta5230]

Buy HONDA

[@stuv81]

Easy peasey

[@beck769]

It`s even easier when you`re in a heat shop!

[@fixit4182]

Easy peezy

[@salvisone4521]

Wasn’t all that easy. But thank you.

[@JeffreyTavares-k6x]

There’s your dinner

[@twiz8789]

They call it a Poulan because.... you keep pullin and pullin and pullin...

[@freetolook3727]

Customer gets bill...what... why so high? I watched you on the video and it only took five minutes.

[@brandonplantier7839]

First

[@antpart7998]

Go truckers eh

[@jdmccorful]

Great "Quickie", thanks.