Brembo Brake Caliper Rebuild / Restoration, Big Brake kit Honda / Acura TL Type S TL-S 2x Speed

[@EnomesSkate]

No talking, no advertisements, just straight to the point. Perfect

[@PureFunction]

This is just soooo satisfying to watch.

[@SebastianBlix]

Stuffing the pistons in with no lube is straight savage bruv😂😂 Great vid though, quite clear and concise. Thank you for the upload!

[@EasternNCSportbikes]

lol they had some lube on them but yeah maybe needed a bit more, thanks for watching!

[@TheShangralaaaa17]

Also compressed air works better for removing the pistons from the bore

[@dubango98]

@@TheShangralaaaa17 thats what he used.. the blowgun with the rubber tip..

[@couch123David]

@@dubango98just people trying to criticize he obviously didn’t want the piston to fly against the caliper.

[@BRZTrackDays]

Very clean! Good job! I need to replace the bushings on mine and I wasn't sure I could do it, until I watched this, thank you!

[@alithegreat7310]

The more consistent you are the more your channel can progress keep up the good work.

[@SubOptimal_]

this will be a big channel i can already see it. keep up the great work sir! this was very satisfying to watch!

[@EasternNCSportbikes]

Thank you much!

[@grafxx5397]

Now that’s how you take apart and paint a caliper.. not like all these lame shops that leave it on and cover the rest of the car with plastic and paint everywhere til it looks ok.

[@treflippa2]

So satisfying to watch! Nice Job and excellent color choice 👌

[@jostnyc]

Best video on KZbin for rebuilding and powder coating Brembos. Great job!

[@odanyboy84]

This has to be the best Brembo paint jobs for me. They look amazing 😮

[@tonythetiger4560]

This is the most satisfying vid I’ve seen on the tube in awhile. Good work. Flawless

[@gaijins30]

It is a strange thing. I've done this with these calipers before from a Mitsi Evo 8, then bigger 8 piston calipers from a Lambo Gallardo. Yet when I watch this it still seems more satisfying to 'undertake'. I guess I aint doing the work just spending the 'time'. Love it!

[@luis708350]

You snapped on this project

[@LAVE0603]

本当に職人技ですね！ キャリパーの解体からペイントが見れるなんて、車好きにはたまらんっす。

[@Rickultimate]

This video just sold me on getting mine powder coated. I was going to just rattle can them but I'll spend the extra $ and get them done right

[@Xx_Sterbern_xX]

Awesome job OP. Miss my 2005 TL 6spd 😞

[@DhruvDrives]

Fantastic rebuild ! Great video! I've been thinking of rebuilding the calipers on my TL-S myself

[@getlikeus1247]

Skills for days! I don't have the patience

[@shineracer369]

This was so neat, Loved the green!

[@christopherrocha1043]

Nice... need to do this for my 07 TL Type S

[@Slayer-33]

Same here broseph

[@watsonsynthetics]

Thanks for showing us that. New project this weekend

[@B_A_S_E_G_O_D_]

Respect Atleast I’m not the only crazy person that takes off the caliper off the car ty so much

[@Iroc_twan]

Good choice on the milwaukee stubby impact gun

[@EasternNCSportbikes]

It is the best, my goto tool for sure.

[@Slayer-33]

Fantastic and therapeutic bro. 👍

[@DC5RParts]

Beautiful work 👌🏻

[@noesantillan975]

So satisfying to watch bro!!! 😍

[@classiql]

Craftsmanship at its finest

[@tee2171]

Own a 07 TL-S, which have these. Make sure you use Akebono pads instead of brembo pads. Brembo creates lots of brake dust and squeal a lot. Switched to Akebono and love them.

[@nonameisthename138]

You are the F'n MAN!!! This was so therapeutic to watch.🤷🏽‍♂️ But who in the hell would dislike this video??! How much would this cost?

[@Amberas1]

Everyone who noticed that he used the pliers on the gliding surface of the pistons to pull them out. If he were to replace the pistons (which he now must do anyways), it's all fine. But the pistons looked quite good. Not sure how much it would cost, but you can save yourself some money by not ruining the pistons when pulling them out! (:

[@nonameisthename138]

@@Amberas1 Yeah, but this looks to be a full rebuild after the spray. So I'm sure the pistons didn't matter at that point

[@Amberas1]

@@nonameisthename138 If so, than that's ok. Problem is a lot of people now want to rebuild and repaint their calipers, and some will use his method and reuse the pistons. Some of these will now have defective calipers and could kill themselves or others. Don't mess around with brakes if you don't know what you are doing is all I'm stating 👌

[@nonameisthename138]

@@Amberas1 Oh I gotcha, and you're right too...be safe brother 🙏🙏

[@Amberas1]

@@nonameisthename138 Gotta watch out for one another. Brakes are essentials (y)

[@MwendaWahome]

This is some beautiful work

[@IvanGarcia-ug7mf]

Satisfying ASMR visual indeed💪😎 and in real time too like a true tech

[@lawrencecoore2021]

Those turned out beautiful

[@williamfullman2639]

Woke up this morning and watched this very relaxing p.s I subscribed as well I'll be watching

[@FREE_WILL_DEFENDER]

This is some great work

[@alex10813]

They came out nice 👍 , did the same thing to mines earlier this year but mines are metallic blue

[@JoranDorifuto]

How did you find the torque specs?

[@ChristianGustafson]

I don't understand how anyone could possibly downvote this. AI-driven bots? All of your vids are top-shelf.

[@ranger133]

Awasome!! Perfect work perfect art

[@danlosada898]

It would be nice if you post the torque specs used, plz. Ty! Awesome job btw. Also, how come you didn't clear over the decals?

[@postup7944]

🔥🔥🔥, just bought a set gonna try my best at refurbishing them

[@albertaoglifer1132]

Really nice job!

[@1231234abcab]

Soothing fluidity

[@FUNKOfilms]

Might have to keep my eye out for these at junkyards. Seems like a cheaper way to get my hands on some brembo calipers.

[@SLOWF20CAP1]

What was the torque spec?

[@lucaabbondanza6289]

🏁💯THANK FOR THE VERY GOOD VIDEO LESSON💯🏁

[@LuisLopez-tt6hi]

Nice fuckkng video. Straight to it. Very self explanatory no need to yap off love videos like this

[@remolacha46]

Pretty clean work!

[@SpongeDude8]

Green, green everywhere

[@Theaveragemechanicpr]

What is the torque on the 4 large bolts?? Also, where did you get the small crossover o-ring?

[@theoriginalpointby]

These are not designed to be separated, so there is no official torque spec. Also the o-ring is not available for the same reason.

[@jzwjk]

15～20Nm

[@BrandonRideout135]

3 ugga duggas with a battery gun

[@joedapro555]

Why is this such a mystery? I can't find an official spec anywhere.

[@Kurosaki990Ichigo]

3 people with rattle spray cans watched this video. They didn't like it.

[@Birdhouseboi810]

Kurosaki990Ichigo you are telling the truth. This is the best video I’ve seen on repainting brembos.

[@MannyGotit]

This needs more likes lol

[@euphoria-experimental]

Lovely lime green...

[@apiepamg6214]

Nice work

[@everythinghondapro5548]

Nice joe man

[@gda9010]

Руки бы оторвать такому мастеру, который за рабочие поршни вытаскивает

[@allanl288]

Amazing work

[@davidsornoza]

Great job very helpfull when doing yourself, Question wht is the torque spec for caliper 👀

[@classicser]

Where did you get the Rebuild kit

[@infernalGotYou]

They’re called ‘repair kit’ for brembo brakes

[@mohammedismail4758]

Good work

[@mauropasillas2054]

Good tools lol ,great video and the job well done ty

[@EasternNCSportbikes]

Thank you for watching!

[@jada4477]

@@EasternNCSportbikes v Ko Ko

[@kenbode8806]

Great job!

[@yasharbijani]

Nice job 👍🏻👍🏻👍🏻👍🏻💯

[@riflebear1711]

Nice color. I love it

[@danielmatveyev3567]

Hey, great video! Can you please share with me your sandblasting cabinet setup, stuff like air pressure and media you use and also any modifications you have done? I have the same blasting cabinet and having troubles with getting it to work properly.

[@Dantutz]

Any chance of sharing the torque spec for the small M6 bolts for the brake pads guides? Minute 06:00 Thanks!

[@armandoponce8945]

Are you going to make a video on how to install onto 92-00 spindles?

[@mikey.5174]

How many ft-lbs oder Nm for the four big bolts ?

[@j.d.7321]

Nice job! I would have done the bolts black.

[@BuiltForSpeed]

Beautiful color choice

[@PARDS2]

SUPERB JOB!!!!

[@jerrysedlacek6354]

Those are some beautifully engineered brake calipers. I might start looking for a brembo kit for my truck. 🤔?

[@tupapi6989]

Just beautiful👍👍👍👍

[@EasternNCSportbikes]

Thank you much

[@rickym805]

What are the torque specs when putting them back together.?

[@bluntforce8749]

That's clean I wish I could do this to mine or even switch it out these seem to be better then mine

[@kingschannel8105]

Masterfully Done!!

[@LVCMTB]

Nice video

[@serghrndz4288]

Where do you find the torque specs for the big bolts?

[@Cheese_Daddy_314]

Extremely clean and professional work, how long does it take to restore something like this?

[@wellingtonmachado8603]

Congrulations !

[@gregorypereda4505]

Great job 😉

[@amoghavarshamurthy]

What did he do at 0:36? That caused the pistons to pop?

[@dubango98]

Put air to the bleeder valve with a blowgun that had rhe rubber tip..

[@amoghavarshamurthy]

@@dubango98 thanks! 🙂

[@selby3235]

I hate how much I love this

[@Galaxy2Free]

Would be good with possible leak check after all.

[@rolandoresurreccion8216]

thoroughly enjoyed this video i dont even have a car :D

[@MrSneakA]

What did you torque the large bolts to when reassembling? Also what seal kit did you go with? The video is awesome btw! Thanks.

[@eduardoguerrero7823]

What’s the function of that tiny gasket you have access to when you open up the calipers?

[@nenadradu6718]

Really good 👌

[@slothystyle]

It's almost like he has done this before 🤔

[@el_sancho_2094]

Umm...

[@randallaguero5047]

i buy this for my integra 90 and work amazing ... plug and play instal

[@alexdelgado3704]

What is the name of the blue tape he used to mask off the calipers ??

[@ReidEvers]

From the description: Heat resistance tape - amzn.to/2LspTaK

[@alexdelgado3704]

Preeshhh 🙏🏼

[@joshuavillegasr]

Why put the decal afterward and not before the clear coat or paint them? Wouldn't thay decal pull right off with pressure washing?

[@Deemossi]

this is awesome, thank you

[@josefernandex5458]

Que obra de arte un 10 para mi gusto los tornillos en negro así parecen más reales

[@A-sq2dy]

Did you put anything on the small seal. Or should it just be fitted dry. And the mating surfaces. Are they also put back together just dry and clean

[@edwardthayer9386]

Very nice!

[@장원덕-b1n]

Wow It's amazing.😀

[@Stopanimtz]

Another great video, this channel is going to be massive! Have you considered adding a voiceover?

[@EasternNCSportbikes]

Thank you very much, Maybe if people like the voice over stuff in the future I will.

[@jcarney910]

I just bought a cl type-s 6spd😎.

[@Xavier-63]

GREEN ! PARFAIT ✌

[@robertalicea5585]

Nice video thanks for sharing how long did you leave the calipers in the oven

[@EasternNCSportbikes]

I think this powder called for 10 minutes at 400.

[@robertalicea5585]

@@EasternNCSportbikes nice thanks again

[@Infamousx51]

Need to put these on my rsx