Eastonmade; 37D Splitting Hardwood 12 Ways!!!

This is almost the best case scenario for production. 12 pieces in one pass makes the job of splitting firewood easy. Let us know what you think!!!
Thanks for all the feedback and support folks. It's very much appreciated. It's great that we are building such a strong community around our products where everyone can share their ideas and thoughts. Hit the like and SUBSCRIBE button if you haven't done so yet and I'll keep you in tune with what's going on in the firewood industry. Hope to see you all on the next one!!!
Give us a call for more information!!!
613-812-3213 Log Splitter Sales/Service
Check out these awesome KZbin Channels!!!
Like our videos? Check these guys out!!!! If I missed you and you want your channel on the list drop a comment below and I'll add it on the next video.
Eastonmade Ultra
Glenn @oldschoolmillenial / oldschoolmillennial
Chris @inthewoodyard / inthewoodyard
Joe @joesfirewoodvideos / joesfirewoodvideosii
justin @lifesapprentice / @lifes_apprentice
Eastonmade Axis
Buckin billy @buckinbillyray / buckinbillyraysmith
Joe @ohiowoodburner / @ohiowoodburner
Adam @hometownacres / hometownacres
mike @KNLfirewood / @knlfirewood
Gord @gpoutdoors / gpoutdoors
Dan @armsfamilyhomestead / @armsfamilyhomestead
Brittany and Francis @BandFFirewood / @bfoutdooradventures
Neil @neilkochdigdriveDIY / @digdrivediy
Eastonmade 5-11
Gord @GPoutdoors / gpoutdoors
Eastonmade 9-16
Ben @survivingcountrylife / @survivingcountrylife7069
Paul @williamsonridgeoutdoors / williamsonridgeoutdoors
Eastonmade 12-22
Harry @thedriftlesshomestead / thedriftlesshomestead
Chuck and Deb @ironandoaksawmill / ironoaksawmill
Brade @savagefirewood / @savagefirewood
Reuben @earthandbloom / @earthandbloom
Todd @struckacordfirewood / @toddpac1
Eastonmade 22-28
Gord @GPoutdoors / gpoutdoors
Doug @offgridwithdougandstacy kzbin.info?searc...
Eastonmade 22MB
Chris @inthewoodyard / inthewoodyard
Eastonmade 48C
Kevin @skidderkev / skidderkev
HTTPS://www.eastonmadewoodsplitters.com
#Logsplitter #firewood #logging #treecare #arborist #chainsaw #sawmill #forestry #homesteading #offgrid #heavyequipment #firewoodprocessor #logger

[@joelbutler7501]

Hard to find someone that isn't "selling" his own product as much as he is selling the industry of wood splitters. Andrew even said whether you buy from him or someone else you are getting quality. That says alot more about Andrew and his integrity than what it sounds like and it was so quick.

[@stevehulsey4663]

Good job

[@shawnkasuboski4147]

I was hoping that my 37D was done ordered mine a year and 4 months ago 😢 hope they threw in some good eastonmade swag for my patience!!

[@timspot100]

Now this is what I’m talking about at least we’re trying to have splitters like the germans

[@OntarioFirewoodResource]

BEASTonmade!

[@oakrunacres2564]

That's a lot of split wood in a hurry with very little effort! Definitely the way to go for high production without going to a processor. Awesome machine Andrew! Dave

[@UtubeIhate]

He actually bent over and didn't use a hook either. Shoulda welded on an umbrella holder for the video so it looked even more leisurely

[@obiorah1]

The 37D is insane, for the big rounds of wood, the recycling time will save time and money,

[@Adam-uy9zb]

Andrew, that’s amazing, you and your guys are doing a great job

[@richv70]

What an amazing piece of equipment! Love it!

[@WilliamsonRidge]

That 37D is an awesome machine, love seeing those rounds split 12 ways.

[@ericmccain6599]

love watching your videos and how you explain everything, I hope to own one of your splitters one day

[@davidedwards3734]

Been a subscriber for a while. Love how Andrew speaks about his competition. Have a Safe Day

[@thelogfather5002]

Beautiful gear Andrew! My favourite splitter of yours yet! It would sure speed my production up here at the Woodyard! Blessings, Jeff

[@lukependleton2589]

Hey just wanted to say awesome machine. Thanks for the videos. Keep them coming

[@GPOutdoors]

I did and I gave it a thumbs up! Love the machine Andrew, and some great points about the 8 way . Cheers!

[@thejpnjn]

Love the video Andrew!! Can’t wait for my 37 d !!

[@sawingwithsandy]

Looks great there Andrew! Hard to beat that machine efficiency and build quality!

[@johnval8777]

Awesome splitter and wedge I could get all my firewood done in a weekend

[@fralin1966]

Awesome Splitter really puts the wood out Cadillac

[@stevenhall1097]

Beautiful machine

[@TGRUBB777]

Heard your product are amazing. One day soon I’ll have some money saved up to give on a try. Impressive unit you showed in the video.

[@TCsOutdoors1]

Awesome Job! In the time it takes me to stand my splitter up to split those big rounds you have it completely split down.

[@LakesideAcres]

Amazing!

[@bluffsidetreeservice]

Just ordered an axis yesterday!! Been holding off for a vertical that is made closer (SW Wisconsin) but finally just decided to order an Eastonmade!

[@johncostello5127]

Found you and Easton made equipment thru Chris at in the woodyard. like the way your equipment looks and works. I will not need an mb22, but I am looking at an ultra, at the small end of your product line. thanks for posting more about your products.

[@JohnSmith-tv5ep]

Looks like it takes longer to feed that beast than to split it! Which makes a good point,..two or three helping feed it, there will be less time on the actual components with less wear, less hours! Good stuff!

[@TheDriftlessHomestead]

Pretty slick! It sure is fast!!

[@briannelson4493]

That’s a great machine Andrew ,that would be the one I would take. I have a lot of big wood that I split, 3-4 hundred lbs per round . Small rounds one can pick up, usually two people, everything else it’s pallet forks or backhoe. But my 35 ton splitter says more . Great videos keep on splitting

[@DudeRanchDIY]

Wow that thing is a beast!! Makes my 37 ton ruggedmade look like a wimp 😂

[@stannelson2582]

Keep up with so many videos and I’ll have change your name to Chris in the wood yard. Lol

[@joeshaffer2506]

Now that’s a awesome machine 👍 A lot more then I need but very nice 👍👍👍 I have a message in with your company on some things waiting to hear back and once again Andrew awesome video keep up the good work

[@EastonmadeWoodSplitters]

If you have any issues let me know joe. We are incredibly busy

[@dartskihutch4033]

Wish I had a Canadian accent like that hahah. Being from Windsor it doesn't compare

[@ChrisLascari]

You talked me into subscribing this time.

[@EastonmadeWoodSplitters]

Thanks chris. Really appreciate the support

[@dennisrexford3035]

Now all I have to do is to figure out how to come up with the money to pay for it

[@marcjoanis6862]

What a beast of machine, is the ground shaking too?

[@donlowe9125]

If l had that I’d be done in no time

[@jamesklosterman6619]

Hey Andrew. could Chris run that on the MB22 ?

[@EastonmadeWoodSplitters]

Yep. That 22MB can go up to a 16 way

[@mikeherschleb5949]

Chis needs that for sure

[@jamesklosterman6619]

@@EastonmadeWoodSplitters maybe. that one. he likes smaller splits. might make a great combo for his set up.

[@markkuhlmann2583]

Would love to see that in action with the box pizza head on it

[@timspot100]

Nothing in my mind beats a Rabaud

[@jasonfrandsen5934]

That splitter wedge looks awesome, question can you tell us about the attached conveyor for the 22-28"s and how they are coming along? that would be fantastic, anyways have a fantastic weekend:)

[@EastonmadeWoodSplitters]

They redesigned the conveyor about a month ago and should be running the first one today. Kenny had it all together yesterday, they just had to modify one of the wings on the conveyor

[@yerbs573]

Hey mate love the videos Would love to get one of these 37D out to Western Australia to cut jarrah firewood what would be the pricing be to get one sent over to Australia

[@Totalyrediclous998]

I've always wondered about a double box wedge possibility

[@chrisp556]

That would take an insane built machine to handle that kind of stress and force. The cost would be almost unjustifiable to save approximately a 1/3 of the time.

[@mikevankleeck3610]

How thick is the beam no worries of it twisting?? How much for a splitter like this??

[@dennisrexford3035]

Where do you get your hydraulic pumps from

[@wyliefox5518]

Hey Andrew can you please use a 8 way with the 37D on the next video

[@EastonmadeWoodSplitters]

Ill do my best!!!

[@jamesbainton]

Ohhhh, looks like my splitter is done! Wait, is that one mine?

[@EastonmadeWoodSplitters]

Lol...not sure. We gotta be getting close!!!

[@justinlambert2447]

Does the 12 way make less waste than the box wedge on my 22-28? I know it depends on type/quality of wood, but I'm making 1 cord of waste per 4 cords of stacked wood. Gonna mount up the 6 way next time and see how it turns out. Going to use the ss attachment to bust up the big chunks first.

[@EastonmadeWoodSplitters]

Let me know what you find out. Appreciate the feedback

[@Ken-Muir]

Looks a great machine! How easy is it to clean out the last log from the machine? Since the blades on the wedge are staggered, the blades furthest from the ram only partially split the log. Don't think I've seen a video showing this last "tidy-up" after splitting.

[@EastonmadeWoodSplitters]

Pretty easy. As long as it not something really stringy or knotty it normally pulls right out

[@Ken-Muir]

@@EastonmadeWoodSplitters OK, thanks!

[@TheTorkerman]

On this machine, seeing it is your biggest baddest model, wouldn’t it make sense to add an extra function valve, with quick connects for the conveyor? Better than running 2 motors right? Just an idea Andrew

[@EastonmadeWoodSplitters]

Yep thats a great idea. The only issue is is robbing flow from a single pump. We do have a through drive tandem pump for doing this if someone wanted to

[@clarkharms]

I am not really sold on the 12-way wedge. Seems that the outer splits are not splitting completely and size is not as well controlled as it would be with the box wedge. One of the best features of the eastonmade is the ability to change out wedges and the ease of doing so. I don’t know if there is any other machine that allows a box wedge to be changed out let alone be changed in height.

[@josevelasco3245]

I have the 12 way but on the gas version 22-28. A 16 way designed the same way fixes the outer portion issue but available only on the processors. Anyway, I found the workaround is you lower the wedge than usual instead of dead center on a big round. The result is only re-splitting the outer 4 up top. The middle 4 and lower outer 4 are good size because the middle is static size and you lowered the wedge to get the bottoms to the nice smaller size. Now you take the outer top 4 that are big to the side, raise your wedge all the way, rest your split on the beam and run it to split using only the single knife portion or center the split through the middle 4 wedges as it acts as a 4 way if they are huge . Seriously much faster than the 4 way. Hope that make sense. It’s a clever design when you really stop and look at it. The box wedge is great but really it’s best for big 20 inches and up and straight grained. Otherwise you create a giant mess. You really have to run it to understand how much kindling it creates. However the splits do come out nice 👍🏼.

[@jimjim753]

What is wedge made from? ar500? Wonder how it would survive nasty cotton wood?

[@EastonmadeWoodSplitters]

Yep ar400. It takes quite a bit to hurt one

[@warrenpetrena7690]

How much does it cost I could use one

[@glennkisling3365]

👍👍👍🇺🇸

[@timspot100]

Show the wedges getting changed out

[@jodyantrim2939]

When will you be caught up on the 37D .I have been over a year now.

[@EastonmadeWoodSplitters]

If you give the shop a call they should be able to give you a better time lime on it. 613-812-3213

[@obizzle]

Is the production time faster on the 37d vs the 22 28? We placed our order in January 22

[@EastonmadeWoodSplitters]

No they are about the same

[@obizzle]

Thanks for the reply can't wait to get ours. Hopefully sooner then our new projected date. Thanks for the great videos

[@somedayzo6]

I placed my order for a 22-28 in June of 2021 with an expected delivery date of 12/2022. I was just notified that my machine is being built this week! So essentially getting my machine six months earlier then expected! Go Andrew and the lads at Eastonmade!

[@savagefirewood]

Hey Andrew curious would a 12 way work on 12-22 power wise etc of course splitting Oak , Maple etc no ugly stuff. Eastonmade #1 👌🏻🔥🇨🇦

[@EastonmadeWoodSplitters]

No...we have tried it a couple fo different ways and the 12-22 just doesnt have enough power to do it reliably

[@savagefirewood]

@@EastonmadeWoodSplitters perfect that was what I was thinking but not sure thanks Andrew cheers.

[@darrellbanks5489]

Darrell Banks from Atlanta GA. How much is a 37D??

[@brianfletcher7942]

The price is on the Eastonmade website.

[@billyh9239]

How does it work with hardwood some of are about 30 “wide

[@EastonmadeWoodSplitters]

Bigger blocks just need to get run through again

[@mikevankleeck3610]

How big is the cylinder??

[@EastonmadeWoodSplitters]

4.5"

[@mikemccrary9346]

So where can I get a splitter in the USA

[@EastonmadeWoodSplitters]

We sell them direct from our factory in Canada. We can ship it to you. Our phone number is 613-812-3213