Easy Acrylic Verification Jig

[@adrianosarrubbi1585]

Grande Max! Molto utile!

[@maxzuppardi6228]

Grazie Adriano per il feedback!

[@t.powell8972]

Nice technique with the boxing wax with pattern resin poured in. Are you still able to achieve a good capture of the area with adequate spacing underneath the IVJ with impression material?

[@maxzuppardi6228]

Sure thanks! I usually add some wax on the fitting area for two reasons: 1) to keep the implants connection area clean to ensure they are fitting easily. 2) To close the boxing to avoid any leaking. But certainly you can manage to make it thicker. The resin that I've used is " PALAVIT G " I think this is the most accurate resin...this is on the market since very very long time... 40/50 years maybe longer... Thanks!!

[@talebkaraouni8666]

Hi , great educational course that was the plan to keep them separate ? Or was not seated ver good ? And why separate please explain . Thank you

[@maxzuppardi6228]

Hi, if not, you won't be able to secure the correct implant position. The purpose is to have the 100 % passive fit for each single implant.

[@1395crazyboy]

Which material has been used? Polymerization Shrinkage of material

[@maxzuppardi6228]

I've used Palavit G ..very minimal shrinkage...www.kulzer.com/en/int/dental_technician/products_a_to_z/pala_2/palavit_g.aspx -

[@mooody1410]

what is the purpose of the aluminum foil in between ?

[@maxzuppardi6228]

to keep them separate

[@mrtwisster4225]

Great :)))

[@maxzuppardi6228]

Thank You