Easy and cheap Infiniti G37 mods

I spent the day upgrading my fog lights and painting my engine cover.
Follow the G on Instagram
/ bukklaog37vids
Karpage link
www.karpage.com/BukklaoG37/

[@jerryramirez3557]

As soon as I heard his name I thought of buklau ownage pranks lol

[@Vampire285]

Like a somebooody

[@soycalitoss]

duh hallo

[@Bootymeatson]

A lot of hate in these comments... 1 thing i want to congratulate you on is the way you changed the fog bulbs. Everyone else is taking the bumper off or undoing the inner fender lining which is completely unnecessary. Good job man!

It's easier to go through the fender liner than to lie on the ground and go from underneath. Don't know who's stupid enough to take the bumper off just to change the lights though.

[@Mag1c4lyfe]

I wouldn't trust this guy to change my wiper blades.

[@roberthaddad4932]

You need to rinse the intake filter with water after the cleaner then let it dry then spray the oil

[@rbuttler12]

That DMV accent is thick

[@evil-g-nius9412]

You do realize REAL fog lights are supposed to be yellowish? The brighter the light the more flash back you get from fog. The yellow helps cut through the fog so you can see the lines on the road....your boys are a little mis-informed bro.

[@bukklaog3717]

evil-G-nius Thanks boss, your appreciated.

[@ApexPressureWash]

That's a scientific fallacy. The color does not matter.

[@Stickykobe420]

evil-G-nius not every city gets heavy fog, for some people is just for looks.

[@DoomFinger511]

That's not as important as the angle and placement of the fog lights. Because they are lower to the ground they light up the road easier and are less likely to reflect back on the fog that is higher up. Having yellow fog lights that are too high would be worse then white fog lights that are low down.

[@Hughvet]

Actually, the yellow tint greatly assists and improves our physical eyes to discern images while driving in poor conditions. This has been studied by the AASA. Regardless, go middle road lumens and yellow tint. Your brain will thank you.

[@paulzalez4209]

This was painful to watch.

[@bukklaog3717]

Paul Zalez thx for the feedback 👍

[@SilentASMR]

the way he painted hurt my heart

[@Crusher103]

i felt the same way. the painting, over oiling the filters, then watching him fumbling with the worm gear on the filter. Just get a screwdriver man, it will save you a lot of time. I have actually never seen somebody use a wrench on a worm gear, literally everybody i have ever seen work on them uses a flathead screwdriver lol

[@rellmang8018]

Extremely I cringed the whole time😂🤦‍♂️

[@DoomFinger511]

@@Crusher103 I like to use a socket bit on a ratchet screw driver. Less chance of it slipping and faster then a flat head.

[@sincere3005]

Are you sure its not just the average "JDM Yellow" for your stock fog lights?

[@leach713]

That bad ass carbon fiber look

[@shaynenichols8343]

Love the vid brotha. Gsquuuuad

[@bwilson06]

Did you rinse your filter with water after spraying it with the cleaner? And you put WAY too much oil on your filter, it's going to end up ruining you MAF sensor...

[@bukklaog3717]

Bryan Wilson yes, thanks for the concern 👍

[@JusTKickZ]

Fog lights look great and I probably saw your G37. I have a G37X and love it no mods yet.

[@masetlazy]

Yo, where did you go to get the wrap for the side panel???

[@tyr180plus9]

yea man im in NY 07 g35x or 14 Gtr both keys in hand let me know when u wonna link up.

[@DoomFinger511]

Your fog light look better now. I liked the faster way you changed them by just removing one bolt, though I probably would of used a ratchet instead of a wrench. I think I'll do the same but go with a more blue tinted bulb that matches the blue tinted headlights.

[@bukklaog3717]

DoomFinger511 thanks brother 🙏

[@DoomFinger511]

@@bukklaog3717 No problem, I like the grille light too. You said you wired it to fog lights right? So I guess that means it will turn on and off using the fog light switch?

[@HabibRKO]

Doing those ricer things to your car only lowers its value and makes it actually look worse than what it was originally. And before somebody replies “it’s his car he can do what he wants” I’m just giving my opinion

[@bukklaog3717]

Raging Russian I own it outright, no intentions to sell.

[@BryanDennisonBryansGaming]

@@bukklaog3717 preach

[@petec6159]

That paint job was a total "Cluster Fuck!"

[@ianriggs]

Hey I would really like to know how u did the lighting behind the grille that actually looked really sick. And what lights did u use??

[@bukklaog3717]

ianriggs I did, I used led strips from pep boys and put them under the upper radiator cover and wired them to fog circuit.

[@ianriggs]

@@bukklaog3717 oh alright cool thanks

[@Armored_RC]

The carbon wrap on the Panels 🔥🔥🔥🔥 deff gotta get movin on that the panels and the steering wheel get me heated Bc the paint stays flakin off well the wheel at least the Panels are like a brushed steel look

[@DoomFinger511]

dude, use a comma and period. Can't tell what you're complimenting and what you're complaining about.

[@papichulo3430]

Nice g bro. Did the short air rams increase hp that you can notice?

[@bukklaog3717]

Troy Jones yeah, especially after a tune

[@seal-n-shinedetailing7348]

One mod I did for my g37 is some halos. They are not the regular halos. I did a video during day tike so people can see them as they get used the most instead of night time. It's a short 3 minute clip. I've got over 300 colors and patterns. I believe it sets the car off pretty nice. Check them out

[@bukklaog3717]

Detailed Wrench thanks and I will check them out👍

[@seal-n-shinedetailing7348]

Bukklao G37 Sounds good man , they defitnintly set the car off. Starrynighthalos.com Any questions let me know and I'll help you out.

[@DoomFinger511]

You have a link to that video? I'd like to see how to add halos to my g37

[@johnboy5632]

Hey man hide did you do that with thee led lights behind the grill?? Please share

[@bukklaog3717]

John Kuwae i put an adhesive strip of led lights behind the crash bar and wired into the fogs

[@dylancutchens6091]

Good video man, more then a lot of people would do. You aren’t doing things right in life if you don’t have haters. Fuck em

[@bukklaog3717]

Dylan Cutchens you are a real one my man💪

[@UpstateBreezy]

Sick car bro. Not gonna hate on your shit like everyone else is doing but definitely listen to the people giving you painting tips. I’m looking to get a G soon.. how has yours been treating you? Reliability good?

[@bukklaog3717]

CheeeezPIC had it day one, now at 148k the only significant work would be pulleys belt and valve covers over 7 years.

[@UpstateBreezy]

Bukklao G37 nice man. Appreciate the quick reply. Nice vids ima sub. Peace.

[@Pyrex_lex]

What part of Maryland are you in I’m in Montgomery county just bought a 2008 g37s yesterday

[@bukklaog3717]

Whitemarsh

[@Pyrex_lex]

Bukklao G37 nice that’s like 40 minutes from me

[@The-Muffin-Man]

I just want the front bumper

[@jtasherr]

How did you get those leds in the grill

[@bukklaog3717]

I have them attached to my radiator shield underneath.

[@angelvalencia8242]

Where’d you get the vinyl wrap?

[@bukklaog3717]

Amazon

[@tyr180plus9]

ill be at the pocono track on Sept 30 2pm come through👍

[@bukklaog3717]

tyroon cunningham is there a special event in the 30th?

[@tyr180plus9]

?? Short ram air intake sucking in hot air / oil on your maf now red cover😕.. How are you improving anything? ?

[@bukklaog3717]

tyroon cunningham preference, Not looking to build a race car.

[@ndk2k4]

youre highly misinformed about short rams... although he did completely mess up the cleaning process and overoiled

[@bukklaog3717]

ndk2k4 save the day!!

[@Max-rg4bd]

Yo, nice car man, I have a 2010, just wrecked it coming home from work and hit some ice, parts are in the mail tho

[@mikehayden7330]

That's not hairspray, that's paint. Even strokes. Sure way to end up with drips. And why would you paint that anyway?

[@bukklaog3717]

Mike Hayden thanks man, maybe I can use your technique when dipping my car

[@torvarrisbrown7776]

hey bro , when you put c a I , that u feel any lag , for some reason my g37s felt sluggish abit

[@bukklaog3717]

Torvarris Brown no, but idle relearn may correct issue

[@DoomFinger511]

@@bukklaog3717 When you put in those air filters for the first time did you need to reset the computer or anything? Or did the computer eventually relearn the fuel/air mixture on its own?

[@bukklaog3717]

DoomFinger511 self relearn

[@richiebay11]

Will u pass smog with those air intakes ?

[@bukklaog3717]

Rich Bay yes

[@richiebay11]

Bukklao G37 okay thx bro

[@mitube4u]

Wait a min. I thought it was suppose to be super difficult to replace the fogs? You have an S?

[@bukklaog3717]

mitube4u yes, and they’re easy

[@mitube4u]

Yea, you made that look way too easy. I alway hear people talk about tough it is to change the passenger side due to the washer tank. But one quick advice if you don't mind. You might want to use gloves when changing out those bulbs next time. You can shorten the life of those bulbs if you have grease, sweat, and or oil on your hands. But thanks for the tip on changing out those fogs.

[@DoomFinger511]

@@mitube4u I think you're confusing the fog lights with the headlights. That is the one where the washer tank gets in the way.

[@henrynavarrete9754]

Hey one thing I hate about gs are that bmw will always be faster stock wtf

[@MRxhalemotorsports1]

Did you do all that stuff in a random parking lot? Damn G? Didnt even rinse the filters , the beyond soaked them in oil. O.o

[@bukklaog3717]

unbiased guy yes, you are the first person to get that correct.

[@White50i]

7:01 What's the track name?

[@bukklaog3717]

Cameron Tucker Idk, I got it from my go pro splice app, sorry

[@dan428]

I got some cool white LED fog lights a year ago, way better

[@jacksiscavage6265]

Oh my.

[@hello-qd8rf]

Not sure why guys put cold air intake systems on these cars they are pulling air from the front of the car and they push the intake into the hot engines bay ? get a good filter leave the factory setup and if you going to paint go with a paint that matches maybe a white krinkle look

[@bukklaog3717]

hel lo because we like to do what we want 🤣

[@hello-qd8rf]

I understand if you want your car to go faster polish the lower intake and get your airbox throttle bodies redone do what you want I guess

[@MarcG7424]

Could have seen the engine cover better in daylight

[@BPattB]

Just a little tip for paint prep. After you clean wipe the surface with denatured alcohol. It removes oils so the paint won't "fish eye". I like the mods tho very nice

[@bukklaog3717]

bpattillo707 thanks your feedback is much appreciated

[@DoomFinger511]

I would of thought it would also be good to do a light wet sand with some high grit sandpaper to give the surface a little bite for the paint to stick too.

[@Pyrex_lex]

Subscribed

[@bukklaog3717]

Thank you

[@boosted_vq3530]

Maybe try picking up a socket set next time

[@bukklaog3717]

I have them but I didn't take them out of the tool box

[@YouThought123]

All these hate comments bro fuck that this video is hard keep working 💯💪🏽

[@ricardosantiago702]

This cars don’t need any mods they looks beautiful stock

[@GamingBuzz1]

I agree the g37x looks perfect stock it's crazy

[@GamingBuzz1]

Just add tints😎

[@tyr180plus9]

Hot air being sucked into your engine = bad gas mileage. Oil being sucked into your intakes = damage to maf, spark plug/coils aka oil in your combustion chamber and im sure only gas should be in there👍.

[@bukklaog3717]

tyroon cunningham I subscribed to your channel because your are right😂

[@bukklaog3717]

tyroon cunningham thanks you should make some videos you seem to know alot👍

[@bukklaog3717]

tyroon cunningham you in the DMV area, we can make it happen car doctor vs. short ram intake BukklaoG37 🤣

[@pwegnerii]

tyroon cunningham

[@dan428]

That’s not true.. hot air would improve fuel economy due to the engine compensating for lower oxygen content by reducing fuel mix.. it’ll produce less power though.

[@evanfowler7440]

Autozone pro

[@javierr1blue]

Guy all that dirt in your k&n filters OMG rinse with water poor engine!!! red really

[@scottis]

the fucking painting holy god dude come on now

[@scottis]

AND THEN COMES THE FILTER CLEANER HAHAHAHA WHAT THE FUCK

[@That_Stinger_GT5]

May be an old video but if you ever paint again and want some really crisp lines with paint, use green frog tape, really good stuff 👌

[@donnightingale262]

Shit what a rough crunt.

[@DavidReyes0224]

Who taught this guy how to spray paint 😂😂😂

[@DoomFinger511]

The kids in the subway who spray graffiti on the trains. Was waiting for him to throw a gang hand symbol when he was done...

[@benitolouis49]

Turned out nice

[@bukklaog3717]

Benito Louis thanks, I appreciate it

[@nosdadon2414]

8

[@Sloganpaul]

that spray paint job was hard to watch

[@erike7297]

LOL …holy shit

[@auto.impulse]

Lmfao I love your name dude XD

[@jessg.9368]

I had fun watching this. I’m looking at a g37 sport sedan for a pretty damn good price . Gas is the only downside to this car .. since we’re amongst the electric car era..

[@bukklaog3717]

Jess G. Thanks man, if you get a g37 they are best priced right now. I git mine brand new at 54k so you can get then at a steal right now and you won’t regret it.

[@DoomFinger511]

When a car is 5-7 years old it's the best time to buy. Most of the depreciation is done (these cars were $40k+ when new and under $20k now) but they are still mechanically new. Pretty common to get one of these for under $20k an well below 100k miles. Got mine for $18k (including NY tax) 2012 G37xS coupe, all options, from an INFINITI dealership, with only 49k miles on it. If you want a more practical version get the sedan. If you want more of the fun factor and speed get the coupe. Back seats are okay for anyone under 6 feet for like a 30 min ride.

[@swervv2957]

DoomFinger511 just got mine. 08 G37 sport coupe. Super clean, everything original, damn near mint condition with 70k for 12k

[@nonameisthename138]

You didn't say what kind of paint you were using. So if it's NOT high heat, it's gonna crack and peel on you. And when it does, DO IT RIGHT the second time!! Get you some primer and a sheet of sand paper. Scuff it up a lil bit with the sand paper, so the primer and paint will stick. Make sure it says "high heat" on the can!! Then hit it with the primer a few times. Then let it dry. Won't take long. Then using the paint, spray evenly in the same direction(you were all over the place). After the paint has dried, get some clear and do the same thing as the paint. Let it dry for a few hours. To cure, let it sit bout a DAY! You will see a HUGE difference!! Now those intakes ain't doing nothing for you!! Should have went long tubes or kept the stock boxes. Short tubes just suck in hot heat. Maybe you'll swap out down the line. And keep that G CLEAN, under the hood too!! 😉✌

[@bukklaog3717]

Nonameisthename 1 high heat caliper paint, and thanks for the tip buddy.

[@95blkmax]

Damn Bukk these guys are getting their panties in a bunch on the comments, haha. At the end of the day, it's YOUR car, so you do WHATEVER MAKES YOU HAPPY on YOUR car, and eff what they say. BUT, I gotta call you out on the air filter deal there- you didn't clean anything lol. You're supposed to spray the cleaner, let it sit for a little, then WITH A WATER HOSE clean them from the inside out. Once dry, THEN you put oil on them. All you did there was made a mud-like coat of degreaser/ oil on the filter that will eventually kill your MAF sensors. So if you haven't re-done this properly, do it soon my friend! Live and learn and keep working on your car. Carbon fiber inside looks very clean

[@bukklaog3717]

95blkmax I didn’t have any access to water🤣🤣🤣 but they just all love me.

[@ricardosantiago702]

Leave it stock looks better stock

[@Getzopurple]

oml please learn to rattle can parts my heart

[@GLDUDE112]

Please actually rinse the filters out good with water after you let the degreaser sit on it for 5 mins or so, then you apply the red filter oil, this was kinda painful to watch, i have the same intake system on my G37 and i take good care of my baby girl

[@user-vv8kq1tt3t]

RavenRider obviously not since u have hot air intakes

[@GLDUDE112]

VQ Power hot air intakes? The fuck? Not sure if you’re trolling or just that dumb

[@user-vv8kq1tt3t]

RavenRider I’m serious. Those intakes are ass. U should stick with the factory air box or buy a long tube intake for G’s.

[@GLDUDE112]

VQ Power well considering it lowers the oil temp and improves acceleration and mpg (all proven by dyno) it’s worth the 400$ stock box intakes are trash

[@user-vv8kq1tt3t]

RavenRider it actually doesn’t lower the temp it’s sucking in hotter air than the stock air box.

[@dxramos]

What did I just watch it was painful damn bro

[@dinky19810]

You ain't lying... Especially when he was spraying the engine cover.

[@kermite-frog5281]

Ricer

[@885.0ELopez]

Bro not to be rude but u did everything wrong that red painting anything on the car is peaty doesn't look good the filters noooooooooooo all u did was create mud in them u should get them checked out u suppose to rinse them lol u clogged them up

[@DoomFinger511]

I agree with the oil filter comment but when it comes to color, to each his own. Everyone has their own taste.

[@eriklarson9137]

Kudos for doing things. But, just watch a few youtube videos first next time. First, since you didn't use primer on that plastic, that paint won't be there long. Second, um. That is not how you clean that filter. Like. Yikes.

[@bukklaog3717]

Thanks, there wasn’t any water behind the supermarket where this was filmed so therefore I couldn’t clean them correctly

[@MrPvPzmc]

I kept saying noooo! He didn't clean the filters right and the paint was just eeeek

[@MrPvPzmc]

Maybe you could sand it down and try again? Or have some more practice with it. Paint from 6 inches away doing light coats to start and not just spraying randomly. Also a primer would have helped with the cracking type look and it needed paint prep spray or tack cloth not apc cause apc can have oils that make the paint not stick right. Also I would have gone with a matte or hammered paint it would have blended better with the coarse finish already present. I doubt you care this much but if you want a car show ready engine bay you can take these steps. Also with the air filter you should have sprayed on the cleaner, let sit for 15 mins wash with cold water from the inside going out until it runs clear then do a light misting of the airfilter oil because now your maf sensor is gonna get coated and it's gonna gum up your intake and you need to clean the maf for it to run good again.

[@bukklaog3717]

Talbot Trammell o water source to do so

[@Koqes]

8:46 why yo feet like that

[@HKPhiliP]

After reading some of your comments, you should notice what's wrong with your so called " Mods " , yes I did the same with my old old honda when I was 16, I had no money, no skill, no brain to work on car, but PLEASE not to the G37. You are purely wasting the car.

[@bukklaog3717]

HKPhiliP I sleep well at night my guy thanks

[@HKPhiliP]

may be in 10 years time, when you learn more about actual mods, you look back about these videos for yours, you will be like " man, I was so naive, stupid and wasted lot of time and money. " And no we will not come to do it for you, I build my own race cars, engine, interior, paints all by myself, and I have seen lot of kids like you, young, rich ( lucky ) wasted lot of money on the wrong things like " fake bamboo brake cover " , so yeah, now i wonder how the hell you get 500 subscribers with skills like this.. sigh~~~~

[@bukklaog3717]

HKPhiliP I made 800$ off of this video vs. the 80$ spent. It says easy and cheap for a reason mr race car builder.

[@DoomFinger511]

@@HKPhiliP Dude it's his car, they cost under $20k now (and he bought it used). You can't judge others by your own standards. I'm sure there are plenty of people in the world who think your taste in cars and mods suck and they're just as close minded.

[@DoomFinger511]

@@bukklaog3717 How did you make $800 off this vid with less then 100k views? It's about $1 for every 1000 views. I have a vid with 4.5 million views and that only made me a couple grand.

[@885.0ELopez]

I thought this was going to be a video of proper mods exhaust intakes test pipes exc but it was the opposite and painful to watch u ruin a sick ass car

[@redownload6216]

same lmfao..

[@DoomFinger511]

sometimes these vids teach you the right way to do it, and sometimes they teach how not to do it. Both have their value.

[@BAND-MAID-USA]

Don't do ANYTHING the way this guy did it. Everything he did was so wrong. Hence the reason he only barely showed his work while it's dark out... And also, way to paint the curb & fuck up the enviornment as well.

[@bukklaog3717]

anthony defabees thanks internet warrior

[@SpankyWhore]

Damn dude, you work so cockeyed... And that engine cover paint is only appealing to 12 year olds. Ps. your fog lights are still yellow.

[@bukklaog3717]

SpankyWhore thanks dude your feedback is appreciated

[@Matthew-yh3hh]

Heat airitake

[@WrongFromWright]

You need a fucking ratchet set dude lol. It hurt me to see you undoing all those bolts with a wrench.

[@bukklaog3717]

ReggaeDubSoundSystem I have a whole snap on toolbox, just didn't have anything with me that day🤣 I took that wrench out of my e36 tool kit😅

[@brendanmacdonsld2macdonald48]

Thats alot of fuckin paint on that little peice of plastic lol

[@jordonbaker3552]

Bruhh wtf you doing

[@R-A-H_-]

What.the.fuck

[@spencerlong1436]

What the fuck was that paint job

[@youngky5081]

You need to do research before you just do the shit Smh.. dawg the way your painting i don’t even wanna see what that ended up looking like..that poor car lmao

[@tarasenko3000]

Колхоз