In this video we are decoupaging slate coasters using the water method which gives a crease free look. Any questions feel free to ask in the comments and I will try answer them the best I can! 😊
Пікірлер: 45
@normacmckay-morris326811 ай бұрын
Marvelous , thank you for sharing your video ❤
@easycrafting1218 ай бұрын
Thank you😊
@helennicholls7182 Жыл бұрын
This is a really great way to show that decoupage onto a slate really is not that difficult at all!
@easycrafting121 Жыл бұрын
Thank you 🙂
@juliahelland64882 жыл бұрын
Thanks for sharing this, It's a great project! ❣
@easycrafting1212 жыл бұрын
Thank you😁
@rosiepeplow54807 ай бұрын
Brilliant. Going to try lemon ones for my s.i.ls birthday x
@easycrafting1216 ай бұрын
Thanku 😊
@DecoupageVintage10 ай бұрын
Beautiful ❤️
@easycrafting1218 ай бұрын
Thank you😊
@alisonender2 ай бұрын
What glue do you use to seal it twice at the end please? Ax
@1thornley11 ай бұрын
Hi do you wait for it to dry before you put the first layer of mod podge on or do you do it while it’s still wet from the water? Thanks
@easycrafting1218 ай бұрын
Hi, I apply a thin layer of glue when the coaster is still wet. I do use a very soft bristle brush for this and very light brush strokes. Hope this helps.😊
@iLikeurdogmore Жыл бұрын
Did you remove all of the back layers of the napkin, or did you only remove one?
@easycrafting121 Жыл бұрын
Hi, yes I removed the two back layers leaving the pattern one. Hope this helps. 😊
@alisonender2 ай бұрын
What glue do you use to seal it twice at the end please? Ax
@patbarnard5218 Жыл бұрын
Is there a specific paint to use on the tiles
@easycrafting121 Жыл бұрын
Hi, i tend to use chalk paint or an acrylic white primer. Hope this helps. Many thanks, Sorry for the late response.
@karenbettinson67142 жыл бұрын
Hi which modge podge are you using to seal coasters thankyou and that all you need to protect them
@easycrafting1212 жыл бұрын
Hi, I use the dishwasher safe gloss modge podge and Liquitex varnish. 😁
@lynneplatt532 жыл бұрын
Does the mod podge and varnish make the coaster water proof? protect the design? What if a cup of coffee is used, will the coaster be protected from the heat?
@easycrafting1212 жыл бұрын
Hi, yes the modge podge and varnish makes it water proof and protects the design. The design will be protected from heat and just use a damp cloth to wipe any stains off the coaster. Hope this helps. 😁
@lindao7887 Жыл бұрын
Just read that Mod Podge dishwasher is protected from heat up to 110 degrees, may yellow if exposed to higher heat, and may stick if a cup is hotter. Actually not dishwasher safe if your water heats up hotter than that though.
@rachaelolsak7100 Жыл бұрын
Hi I use the dishwasher safe modpodge but I'm finding after testing a hot cup of water from the boiled kettle it sticks? Any advice
@lindapotter4251 Жыл бұрын
Hi, I make these all of the time and to make them usable for a hot drink you need to use heat proof varnish......I use polyvine, the one with the shells on the bottle as they do many types
@SweetCreekDesigns Жыл бұрын
Where do u get your slate from? Do they come with rubber circles? I can’t wait to try!! Thanks for the inspiration?
@easycrafting12111 ай бұрын
Hi, I buy my slate coasters from B&m, also The Works have heart shaped slate coasters which look lovely too. They all come with the feet on them too. Hope this helps. 😁
@raghunathsharma76262 жыл бұрын
Fevicol use kar sakte.hai.kya
@sonz42052 жыл бұрын
Thank you ❤ I have been using mod podge before the napkin goes on as well. I think that was wrong. Great video. Thank you.
@easycrafting1212 жыл бұрын
Thank you, hope this helps, I dont think there's a right or wrong way, it's just what technique works best for you and for the best results, I'm always still learning. 😁
@lindao7887 Жыл бұрын
Will this also work on wood coasters? Also, with regular varnish, can you put hot cups on them?
@easycrafting121 Жыл бұрын
Hi, yes i use the same method on wood coasters, check the regular varnish first that it is heat resistant. Hope this helps.
@AsiehSokhanShenoHaghi2 жыл бұрын
Thanks for sharing this video! I made some coasters with decoupage technique. I sealed the surface with Mod Podge for 4-5 times. After one week, I used Dupli-Color Varnish and let the tiles to cure for a week. Then when I put a very hot mug on the tile, it didn't stick but there was a deep circle. Could you please tell me what the problem was?
@easycrafting1212 жыл бұрын
Hi, oh no, is the dupli colour varnish heat resistant? I do apply very thin layers of glue and varnish. I have started using the modge podge dishwasher safe to apply the napkins and I always use Liquitex gloss varnish. Hope this helps. Happy crafting. 😁
@lindao7887 Жыл бұрын
Asi, I would say too many coats of mod podge, 2 coats of dupli-color is better and let it cure longer, some say even 4 weeks, I don't know.
@natalianakoriakova80847 ай бұрын
Liquitex varnish is not heat resistant. Your best best is either high heat automotive spray or epixy resin. Not every epoxy resin is heat resistant and will leave rings even after completely cured. You need to find that can withstand hight heat.
@simik49816 ай бұрын
Rustoleum is heat resistant
@sophieamat94679 ай бұрын
❤ Nice result
@easycrafting1218 ай бұрын
Thank you! 😊
@angelabrowning8022 жыл бұрын
Lovely
@easycrafting1212 жыл бұрын
Thanku😁
@craftyfashiongirl2 жыл бұрын
Where do you get those kind of slate tiles?
@easycrafting1212 жыл бұрын
I get them from b&m store, sometimes home bargins, also sometimes The Works depends if they have them in, also The works sometimes have heart ones. Hope this helps.😁