Excellent; simple, cost-effective. Pay close attention to the close-up shots of his rig; there are subtleties present in the schematic that are not discussed in great detail. Bravo.
@MasterIvo3 жыл бұрын
This circuit is ALMOST the same as the Tesla oscillator. the only thing to do is move the capacitor, in series with the primary coil of the step up transformer. The relay most NOT have a diode. The primary is made series resonant with the (tuned) capacitor, and the inductive spike impulses of the auto oscillating relay are fed into the primary. this Tesla circuit can be found in the august 1919 article in the Electric Experimenter.
@After_Tech_Industries Жыл бұрын
Though I do wonder what an auto oscillator relay circuit would need to be at resonance with the primary coil...
@MasterIvo Жыл бұрын
@@After_Tech_Industries the mechanical switching distance and supply voltage needs to be controlled to get the right frequency, which can be a sub harmonic of the primary coil resonant frequency
@redeye6192 жыл бұрын
This video has randomly popped up in my feed, this is very handy for a basic arc generator, but this is pulsating DC for AC to be produced the current actually needs to be alternating positive to negative and back, this is just creating a high voltage spike from collapsing and reestablishing magnetic fields
@Kevin_KC0SHO7 жыл бұрын
I really like your videos because they take basic principles and apply them in practical and cool ways.
@scroadload6 жыл бұрын
Thanks for great video, watched last night , put it together today, works like a champ. helped me find a leaking high voltage shielded wire. Many thanks!
@videolabguy6 жыл бұрын
I built one of these in 1975. My bully tormentor never knew what hit him. Twice! Ah, good times. Good video!
@ludicscience6 жыл бұрын
LOL ( ͡° ͜ʖ ͡°)
@teejaguilar6 жыл бұрын
@@ludicscience hello sir can it work with a electronic resin ignition coil? with a electronic distributor system? just making sure and how many amps does the relay need? set up on a lancer sl 1985 production
@shitvidbegoneshitvid4 жыл бұрын
hold up
@Ham5493 жыл бұрын
Why do you need the capacitor? If you rig the normally closed switch in series with the relay coil when powered on the relay will open cutting power causeing it to close energizeing the relay coil opening it again causeing pulses.
@Lsbud2 жыл бұрын
Great video. I need to build an electric fence to keep deer out of my grape vines. Last year they ate every one of them before they got ripe. Would this work for a wire about 100 feet?
@stephencampbell14456 жыл бұрын
My Friend, you are like Tesla. a certified mad scientist!
@anekdoche70552 жыл бұрын
SUPER cool m8 i wasn't sure about this till i saw your vedeo so this is super encouraging thank you for this dude
@GTagFPV9 жыл бұрын
Have you ever tried to put the capacitor between the coil of the relay and the ignition coil to the second output? You can drive much more power this way.
@drstrangelove094 жыл бұрын
Can you please give details about the relay and cap cap? Thank you!!!
@MasterIvo3 жыл бұрын
the spark can be fed into the ignition coil primary if the primary is made series resonant (low impedance). the impulse (inductive spike from the relay coil when opening) will than be used to amplify the secondary, and will give much higher output! With NO spark at the relay. I will build it and show it on my channel, as this is how N Tesla did it.
@meowmonster3 жыл бұрын
Ok. Cool
@naturalbornfool8 жыл бұрын
Great vid, I understood it clearly and am collecting the parts to make it now, T. Y.
@sinegra307 жыл бұрын
Hi! Thank you for this excelent video. I want to use a TV Flyback as a ignition coil in a experimental motorcycle do you think it will work?
@teslatrooper853 жыл бұрын
Why? TV Flybacks have very brittle ferrite cores. Putting that next to vibration nightmare is not a good idea.
@johnspofford42975 жыл бұрын
Ludic Science ...What is The RELAY your using here ?? Is this a 12V Relay Or Something Bigger ??
@ludicscience5 жыл бұрын
12v 10 amp dpdt relay
@johnspofford42975 жыл бұрын
Im Using 30am / 12V Relays BUT they don't last as they are getting HOT and Burning up ...Can you suggest something ?
@johnspofford42975 жыл бұрын
Ludic Science ...I Really Love your posts, BUT can you Comment about my Coil Driver Issue. My Relays Continue to Burn up or Jam ..Im thinking the Relay is Cycling to fast ?? Im using a Quality Relay ...is there a way to Slow the Switching ??
@MrCharlieCom8 жыл бұрын
I've done this using an old fashion doorbell buzzer to make and break the circuit. One good tip is to use the original ignition capacitor in the circuit. The original capacitor will have the correct capacity to match the coil perfectly for maximum high voltage output. Use of other size capacitors will not produce as high a voltage.
@ludicscience8 жыл бұрын
+MrCharlieCom Good advice thanks!
@SUNTZE137 жыл бұрын
MrCharlieCom . hi, what is the original ignition capacitor value. thanks
@MrCharlieCom7 жыл бұрын
I've played around with these before and it makes a big difference what size capacitor you use. The correct capacitor depends on the particular model ignition coil. About the only way I know of to tell is to find what model car the coil came off of, then look up the part number/specs for what ignition capacitor was on the car. If you went to a junkyard and purchased a used coil, maybe you could have them pull the matching capacitor at the same time. Otherwise, you might try several different capacitor to see which gives the most output.
@abimanyuraka3863 жыл бұрын
Like unbalance voltage from coil and capasitor?
@ChrisG32530325 жыл бұрын
Handy for home security, connect the HT lead to your front door handle 😋
@6themaker4 жыл бұрын
Chris. G just a lil tickle and laugh if you touch that door handle
@LouNaar4 жыл бұрын
Could you post a parts list of what you used please? And where to order if possible. Thanks
@tedtomko30443 жыл бұрын
Really?
@mattroy78463 жыл бұрын
Exactly what I was looking for! Question - would it also help to put a resistor in series with the cap to reduce the inrush on the closing contact?
@energyforever7202 жыл бұрын
@lucid science why didn't you just use a 12 volt AC power supply hooked up straight to the ignition coil?
@sssttt65338 жыл бұрын
This is another great video. I gave it a LIKE. Is the pulsating INPUT of the coil an ac or a pulsating dc ?
@ludicscience8 жыл бұрын
+Sss Ttt pulsating dc thanks
@sssttt65338 жыл бұрын
Thank you for your answer
@annelieseocallaghan8017 жыл бұрын
Hi Ludic Science, what are the specifications of the relay? Thanks,
@cobbiesmith92679 жыл бұрын
Great video, as always. Can't wait for plasma ball video. Thanks for sharing
@ludicscience9 жыл бұрын
Cobbie Smith Thanks! plasma ball will come in a few weeks, I have a couple of other videos almost ready.
@alvaro91696 ай бұрын
Is there any form to reduce the frequency? I am trying to make an electric harp (like an electric fence but for asian hornet). Thanks in advance
@rshoemake2 жыл бұрын
I need something like this for my own experiment. Thank you so much!
@greggrimsley53374 жыл бұрын
Ludic Science, I just finished watching your excellent video. I have been searching for this setup. I want to apply this to killing rats in my garden. Do you think it would work? I have built an enclosure with 6 electrodes (3 pairs) spaced 3/4" apart. I want to connect this to those electrodes so when the rat steps on 1 pair of electrodes at the same time it will be killed immediately. I want to use a 12 VDC battery. The only issue might be that the spark will jump to the paired electrodes and continuously fire. I only want this to fire when the rat steps on a pair of electrodes. Maybe I could control the spark gap with a larger capacitor. I would enclose this setup in a water tight non conductive enclosure. Also can you tell me what type 1uf 250V capacitor you are using and what type/size relay are you using and how did you secure the wire in the center of the ignition coil. Sorry for the long response, I hope you can help. TIA
@trenthall56064 жыл бұрын
Where did you get a relay like the video?
@thekef30135 жыл бұрын
Exactly what I needed, thanks.
@Best2Strokes4 жыл бұрын
Very nice bro 😀❤️
@GaneshmanLamathinker Жыл бұрын
Ludic sir after passing current on if we remove the HV wire piece where does the current jumps inside coil or it doesn’t jumps any place unless meet negative ?
@gamingpahogniva54885 жыл бұрын
Is the capacitor ceramic? Can you use an electrolytic? I have a school project and are quite new to electronics. Thanks, pls respond i need help!
@ludicscience5 жыл бұрын
Never electrolytic
@johnspofford42975 жыл бұрын
My Friend, The RELAY your using is What ?? 12V 5pin ??
@juhasaario5446 Жыл бұрын
Great diagnostic tool
@lsdlsdk4845 Жыл бұрын
You haven't mentioned the maximum voltage of RELAY to be used? Kindly specify the relay input and output voltage required.
@yosefissat42974 жыл бұрын
i liked the vid i searched this alot of time ...but i think that output voltage is pulsed voltage its nether ac or dc but its closer to be dc just curios if i am wrong correct me plz
@bozoloz60782 жыл бұрын
I see this as a "basic ciricut" but how much does it draw?
@THOMASTHESAILOR7 жыл бұрын
I think that general purpose ignition coil is rated for 25Kv with 12 volts input. That type of single coil was used in all cars and trucks from about 1930 till around 2000. They didn't change much, until 2000, when they went to smaller coil packs, 1 on each cylinder..
@gregorykusiak54244 жыл бұрын
And one per pair of cylinders- a 4cyl will have 2 coils in a pack, and a 6cyl will have 3 coils in a pack. These coilpacks will have 2 secondaries per coil and the system is called a waste spark ignition, because there is a spark present in the cylinder on its power stroke, as well as in the paired cylinder, on its exhaust stroke (of the 4 stroke Otto cycle)
@fredriko.zachrisson97117 жыл бұрын
I am working on a Induction Coil with a mechanical interrupter, but I cant seem to get it to work properly, so I wondered if you think that this driver can replace the interrupter?
@HendraGunawan-tz4fh2 жыл бұрын
Mr ,if we change capasitor with other thing (non capacitor) Such as dioda or transistor or 12 volt small lamp ,what Would it be to ignation coil ?, is it work or not.thank you ,
@krammoto12044 жыл бұрын
Can you give the list of specific materials that you use to build this thing..
@alvarofernandezgonzalez1092 Жыл бұрын
Thanks for the video! I am trying to make an electric fence using solar power. The idea is to protect honey bees from Asian Hornet at the north of Spain, where we are suffering from this plague. What I need is a very simple circuit (like yours) for charging an ignition coil and discharge twice per second (aprox)... ¿Could be possible to modify your circuit in order to modify the frequency? Thanks a lot!
@GaneshmanLamathinker9 жыл бұрын
Good but will a relay used in car can do this job or needs any other type relay?
@ludicscience9 жыл бұрын
Ganesh man Lama a relay car will do the job.
@ryanking45596 жыл бұрын
I just tried to build this circuit using a matched automotive condenser/capacitor but my automotive relay is just buzzing. Is the oscillation too fast for standard relays to be able to actuate? Did you use a reed relay? The one in the video doesn't look like a reed relay either. Any advice would be greatly appreciated!
@BuildNStuff Жыл бұрын
I'm having this same issue. The relay just buzzes, but no spark from the coil. You ever get it figured out?
@ryanking4559 Жыл бұрын
@@BuildNStuff ended up using a pre built high voltage generator. Cost less then messing around with relay and caps and is all solid state: www.amazon.ca/dp/B07ZYY6KZR/ref=sspa_dk_detail_0?psc=1&pd_rd_i=B07ZYY6KZR&pd_rd_w=ivXhb&content-id=amzn1.sym.c7dca932-da6a-44fc-af09-cc68d2449b34&pf_rd_p=c7dca932-da6a-44fc-af09-cc68d2449b34&pf_rd_r=5G77CPRC76SANBWVRN5Y&pd_rd_wg=KDqqm&pd_rd_r=624b8654-14f4-45ec-8fc2-5b74ca6ad23b&s=electronics&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyMDVMOTFNTFNISzFVJmVuY3J5cHRlZElkPUEwMTkyNzQ3M1UwWDVZUkdLSlVMSiZlbmNyeXB0ZWRBZElkPUEwNDc2MDQ4Rk5HN1VRSDg2Q1BEJndpZGdldE5hbWU9c3BfZGV0YWlsJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==#customerReviews
@johnhosler94173 жыл бұрын
Sir I wired a auto relay both hots and grounds together it definitely occilated so would installing a variable capacitor charge the frequency?
@mecarloschavez62814 жыл бұрын
made it work my coil was bad, bought a new one and worked, can it work with a solid state relay ?
@bhakteshvernekar34687 жыл бұрын
can you show how to make the coil driver please.?
@Eren-he5dt6 жыл бұрын
When i connect relay to ignition coil it stops buzzing. I think its because of low current(1amp adapter). Relay's coil got 400k ohm, indiction coil got 0.6 ohm. Can increasing amper output help? Or adding some resistor on way to indiction coil make it work?
@alanmcpherson94297 жыл бұрын
Alan McPherson Referring to early ignition systems. TO FURTHER CLARIFY...One of the laws of magnetic induction is that the output voltage of the secondary winding is dependant on how quickly the primary field collapses. If you took an auto ignition coil and applied 12 volts AC at 50 cycles the output from the secondary would be surprisingly small, because the rate of the applied current is relatively slowly building up and diminishing at only one fiftieth of a second, but apply an instant 12 volts into the primary, and provide a fast path for the collapsing field current to follow, and enter the capacitor, which quickly sucks up the energy, thus the output will be dramatically increased. Then the points shut, which discharges the capacitor, ready for the next cycle. The points capacitor Is not present in the circuit to stop arcing and damage to the points, it is there to assist in the rapid collapse of the magnetic field quickly soaking up the current from the collapsing field. That it stops arcing and destruction of the points is just a happy coince dance.
@juanchocarlos63196 жыл бұрын
Hola muy buenos tus vídeos tengo una pregunta y espero tengas tiempo para leer mi comentario, en vez de un relay se puede usar un SCR espero tu respuesta gracias...
@punjabiboy14375 жыл бұрын
is this coil a truck's part or an old model's ? coz cars have much thin ones
@ludicscience5 жыл бұрын
From a vw beetle
@marakeshg81123 жыл бұрын
Thank you, You're awesome!!!
@PeterPete6 жыл бұрын
Been trying this for a small project but can't get both the coil and the relay to work together with the capacitor. I have connected a spark plug to the coil and can spark the spark plug once using a 9v battery without the relay and I can get the relay to continuously oscillate without the coil connected but having problems combining the two set ups so the spark plug continually sparks intermittently. Any help would be grateful.
@PeterPete5 жыл бұрын
yeah sorted it out - didn't use the capacitor afterall and had a continuous spark! Aren't I clever eh? So to get a spark plug to spark continuously all one needs is a power supply, ignition coil, relay and spark plug!
@overmind063 жыл бұрын
Hey is it ok to use bigger capacitors? like 220uF for example.
@Gsavell3 жыл бұрын
Is it truly AC or is it more like a pulsed DC ?
@kame89193 жыл бұрын
hello, what transformer is the one in the video? I don't know English very well ... I would like to know the name of the electrical transformer.
@jonlambert3213 жыл бұрын
I've got 4 pins 30,85,86,87 now which wire connect to power ,to ground ,to capacitor, and coil high voltage,?
@EduardRitok7 жыл бұрын
quite a few years ago. I tried to connect primary of this ignition coil to MOT (2100V ) ...you can imagine what happened....no..it ditn't make any sparks..it EXPLODED to my face and all over the kitchen ... :D :D god...
@musicmanrsa8 жыл бұрын
i have 2 questions with regards to your device ? 1) what size cap are you using and or can you interchange as you see fit ? 2) can i use a normal 12vdc 5 pin relay thanks
@ludicscience8 жыл бұрын
+Nico Botha you can use a cap from 0.5 to 2 uF, ceramic or film type. Yes you can but it has to be 10 amps or more
@musicmanrsa8 жыл бұрын
Ok thanks ! It works. Do you have a video on how to connect a normal PIR (alarm passive) to work as a switch ?
@agashcool1239 жыл бұрын
are you using 12vac or 12vdc? ,and if you are using dc could you use a drill battery or even 8 AA batteries connected in series?
@ludicscience9 жыл бұрын
+agashcool123 12 vdc. yes you can.
@kannants26512 жыл бұрын
Nice idea bro appreciate it
@mckanebullerlee30208 жыл бұрын
Can you put you write out the number schematic connections instead of the picture? The picture is good, but doesn't call out the numbers. I've tried this is a 4 plug relay. It seems this setup needs a 5 plug relay to work. Please elaborate a bit. Thank you!
@حنابطرس-ج5س8 жыл бұрын
+Mckane Buller Lee Yes it needs a 5 pin relay
@raykent32118 жыл бұрын
To add a bit to the earlier comment, you need a relay in which there are contacts that are normally closed. You get that with a changeover relay, as shown. It would also work with a 4 pin relay that has normally-closed contacts, but they're probably rare birds. Buy a 5 pin (or greater) one with contact rating of at least 5 amps for this application, I suggest.
@chongshenchang93673 жыл бұрын
Can we use it for electrofishing..?
@marsenification8 жыл бұрын
how much current in the output? is the spark would still fire if two cable are submerge in water? is the coil can operate like that for a long time like 2 to 4 hours? i want to use it to make high voltage colloidal silver.
@ludicscience8 жыл бұрын
current is around 5 ma. if water is distilled i think it may work. howwever i don't think it can be used for more than a few minutes
@glamdrag8 жыл бұрын
Is this a hot spark? I mean, would it burn a piece of paper easily of you held it in between?
@ludicscience8 жыл бұрын
Very easily
@glamdrag8 жыл бұрын
ah nice thats what i need. I took apart a gas-light and tried using the sparks that heat up the gas, but it didn't work at all...
@datboidominican7 жыл бұрын
Mann that was clear. I've got good understanding of it finally, thanks. Question for everyone. I need to know if I hook up an ignition coil to a 9v square battery and solder in a capacitor, will it give me more spark than without the capacitor? If so, What if the 9v is a rechargeable? Will it charge? Less spark being that it's a rechargeable? Would it explode? What if I hook up two? I'm wanting to make a flamethrower kit but not run through all my gas with a modulator. So I figured if I just put an ignition coil not directed to the car battery, it wouldn't kill my battery. And I have the free will of just pressing the flick switch when I'm at high rpm(when I know my car's gonna spit fuel ) Any theories? suggestions?
@vinutwister4 жыл бұрын
Can I use this step up in car's engine....does it affects the car engine in any way.....
@larryfostano66268 жыл бұрын
Made this circuit, very easy and well done.Question with my circuit; want to use this to generate voltage for a very small electric garden fence, many chipmunks eating and destroyin my garden, I had a 400v 1uf cap I used and it worked but intermittently.Do I need to change something or is my ignition coil the culprit ? Thanks ,nice job
@ludicscience8 жыл бұрын
Try using a larger cap. 1.5 uf or similar. However, the relay contacts will wear in short time. This circuit is not recommended for continuous use.
@larryfostano66268 жыл бұрын
Do you have a better option to get continued use,I have many rodents attacking my garden and would prefer the electric fence circuits if possible. Thank you for your quick response
@ludicscience8 жыл бұрын
chemelec.com/Projects/Fencer-2/Fencer-2.htm
@thomasferko86668 жыл бұрын
Try a 630 volt .22uf cap A 400 volt cap wont cut the hi voltage and current.
@larryfostano66268 жыл бұрын
Thanks
@DeandreSteven9 жыл бұрын
hello ludic. can it be said that this is a primitive inverter circuit? and if the output is ac that implies you can step it down with a step down transformer, yes?
@ludicscience9 жыл бұрын
+Deandre Chitay Yes it is a kind of inverter. In principle you can use a step down transformer, however you will need a transformer that can whitstand 10,000 volts as input. Most transformers will burn with that voltage.
@BushCampingTools8 жыл бұрын
Fantastic great videos!
@vegettasayayin30708 жыл бұрын
hello friend I would like to know what are the materials you use for the manufacture of the device please
@kjhendrickson6 жыл бұрын
Here is my BEST GUESS regarding the parts that are similar to what he used: 12 VDC, 2 A (24 W) Power Supply / Transformer (True Lumen [11442-524610]) 8 Pin 12V AC Coil DPDT Electromagnetic Power Relay (HuaHuiYuan MY2N-J) 1uF, 250 VDC Capacitor (PANASONIC ECQ-E2105JB) 12 VDC Ignition Coil (Tisco 396546R93) 10-Piece Test Lead Set with Alligator Clips (SE TL10)
@MechanicForGMCCars3 жыл бұрын
can you reverse polarity of ignition coil with flasher relay? ore use dual relays for waste spark singel coil?
@tad2ik Жыл бұрын
The relay was nicely oscillating until I connected the coil primary and it stopped. Then I tried to use larger 18v battery it worked for awhile but then burnt the relay
@lynnwendt96067 жыл бұрын
Great video but how do you make the relay switching back and forth continuously ?
@kjhendrickson6 жыл бұрын
The relay switches back and forth on its own -- if you connect everything properly. By connecting voltage to the proper pins, the coil in the relay energizes and effectively turns into a magnet. That causes the piece of metal attached to a hinge to be attracted to the magnet. Once the metal piece moves towards the coil/magnet, it causes the circuit to be open (no more voltage) which causes the metal to go back to the original position. So, as long as power is connected correctly the metal will flip back and forth between the coil and the default position all by itself.
@djwilson48625 Жыл бұрын
I'd like to create a slow pulse spark, like for an ignitor for a grill. Something that sparks 1x every second.
@southernexposure123 Жыл бұрын
Some videos show they use a turn signal unit that's made for cars in place of the 555 timer. Look them up. Look for "homemade DIY fence charger." OR with this same circuit change out the timing components (resistor / capacitor) values on a NE555 timer IC. Wire in an LED light for the timing.
@southernexposure123 Жыл бұрын
I just now found the video you need to make your circuit. kzbin.info/www/bejne/opauf5Wee8t4Y7s The video linked above is made by the same person who made this video right here.
@11T8728 ай бұрын
What is life expetance of that relay?
@fredsalter19154 жыл бұрын
Excellent video, sir! Looks like you could use this to get the truth out of someone :-)
@faizaidil7511 ай бұрын
May i know what is the relay current rating
@craignehring9 жыл бұрын
Now that is fun, check the voltage on the primary with it running, it will be in the 100's of volts as the field collapses. I remember trying to attach a dwell / tachometer to a coil while the engine was running and did not think there would be a shock hazard. There IS
@ludicscience9 жыл бұрын
Craig Nehring oh yes it is!
@johnkean17197 жыл бұрын
Very good. If you do this, just make sure the capacitor has a satisfactory DV/DT function. A common radio etc. capacitor will not cope for long. Try one out of a distributor or magneto.
@fishbake79 жыл бұрын
I have a question. Would it be possible to simply use a 12 volt AC power supply plugged into the wall (without the Relay) to get similar results
@ludicscience9 жыл бұрын
+Jon Fisher No, the relay is neccesary.
@fishbake79 жыл бұрын
+Ludic Science Humm! Wouldn't the fact that you are applying AC to the circuit, create a high voltage ? I have never tried it but wouldn't that work?
@fishbake79 жыл бұрын
+ll98ll So from what i am understanding is that if it a square wave instead of a sine wave it will work better. Correct?
@crazzy4passion9 жыл бұрын
Nice video dude. I want to do the same thing and got the same coil, but i got 5 pin relay used in car and that is not working...Kindly will u please let me know which coil u are using and capacitor value too... i'll appriciate.
@ludicscience9 жыл бұрын
+Zeeshan Hayder almost any coil will work... i don't know the model of my coil, i just asked for the cheapest... The cap is 1 uF @250 V.
@crazzy4passion9 жыл бұрын
Sory i had to ask about relay, by mistake i wrote coil. Kindly let me know the relay serial or model etc.
@ludicscience9 жыл бұрын
+Zeeshan Hayder there are hundreds of relay models out there. Any 12 volt relay will work. Mine is a "12 volt DPDT relay"
@eminusipi8 жыл бұрын
Nice videos, lots of great stuff. I believe that pulsating DC is more accurate than AC. If the coil is connected following the + and distributor coil markings, the HV terminal will produce a negative pulse followed by a few much lower voltage oscillations. It's easier to jump a gap with negative polarity and that's why it is used in automotive applications. I think that if you use this for plasma globes it would be very unpleasant to touch since the frequency is low enough for nerves to respond to the shock. An AC flyback would be better if you can find one.
@ludicscience8 жыл бұрын
+eminusipi Thanks! AC flybacks are rare these days, I was thinking on winding my own secondary
@eminusipi8 жыл бұрын
+Ludic Science I think that the challenge would be finding the right ferrite core to accommodate the HV winding. I haven't looked lately but some of those old flybacks may be available on ebay. Good luck.
@nickdavis3711 Жыл бұрын
Strange, I just built this setup with a brand new high performance coil, a relay and cap and ingot nothing.
@lappieslabuschagne24284 жыл бұрын
Would the current be sinus , pulsed or square wave ?
@carlubambi5541 Жыл бұрын
Great video can be improved with a few simple modifications and can uses it for many things
@kennethlandicho79003 жыл бұрын
What happen to a person that accidentally touch the output of ignition coil when it's alive? Just asking,. Ty for response
@ludicscience3 жыл бұрын
from a nasty stock to d3ath depending on the particular conditions
@morpher443 жыл бұрын
If the ignition coil has low resistance, there would not be enough current to move the relay.
@samisugar78458 жыл бұрын
thank u for the nice video can u please tell how many ampere can this coil generate ?
@ludicscience8 жыл бұрын
around 10-15 milliamps
@samisugar78458 жыл бұрын
thank u my friend let us say that wattage of the output is : 10000v x .015 milli = 150 WAT dont u think that there is some over unity here ?
@ludicscience8 жыл бұрын
No, there is no overunity
@TheToillMainn6 жыл бұрын
That is NOT alternating current. It's a high frequency DC current..
@ferencgal18585 жыл бұрын
Dear TTM, I think you are wrong. If we employ capacitor the gadget will output high frequency, damped oscillated AC- according to the textbooks.
@AnotherWisenedOne5 жыл бұрын
@@ferencgal1858 You are wrong. If the AC coming out of the wall is not rectified in the wall transformer, then it will still be 60 Hz AC when it goes to the ignition coil. If the output of the wall transformer is smoothed out DC, then the power going to the ignition coil will be DC, but pulsed at the frequency of the particular relay opening and closing. Some relays will operate or "buzz" faster or slower than other ones due to various factors. Capacitors in the wall transformer housing are used to smooth out the 60 Hz pulses coming past the diodes. Randy
@area85restorations754 жыл бұрын
I got it working but you may want to emphasized that this requires a NORMALLY CLOSED relay.
@trenthall56064 жыл бұрын
Can you send me a link to a relay I can buy that will work like the video?
@Travelbeatcreations.official8 жыл бұрын
If I were to use that in an application, how long can it operate at maximum load? Lets say a 200 000 is a minimum, what do I need then?
@thewrenchjockey42513 жыл бұрын
cant you use a diode for arc suppression for the relay?
@bensonarinze41595 жыл бұрын
Is there any other way apart from using relay?
@prettyhard01506 жыл бұрын
can i use this to catch a fish?
@ted_van_loon3 жыл бұрын
I have probably once thought of something like this, but now when this is the perfect solution for a project I am working on I didn't,
@thomasferko86668 жыл бұрын
A standard ignition coil has a primary resistance of 1.6 ohms.I have a ignition coil that has a 1 ohm primary resistance. What value capacitor is needed in my case.
@ludicscience8 жыл бұрын
try using a 1 uF cap
@johnsnow70069 жыл бұрын
Nice... Can I use this as a flyback driver?
@ludicscience9 жыл бұрын
Emre Homko No, the frequency is too low for a flyback.
@engsdt87097 жыл бұрын
What would you need to get a stronger spark?
@felixsyn64927 жыл бұрын
by any chance can this relay oscillator drive a tesla coil from 240VDC the same way it does with the ignition coil?
@dineshbasker5 жыл бұрын
Can we make tesla coil with this as opposed to a flyback?