EASY How to Build Shed Walls for a 8x12 Shed

Complete List of Materials Used: homedepot.sjv.io/XYjjjy
List of My Favorite Tools for DIY Shed Builds: amzn.to/3TNPlcS
Plans of 8x12 Gable Shed: (everydayshed.com/8x12-shed-bu...)
Welcome to our channel! In this video, we'll show you step-by-step how to frame walls for a sturdy 8x12 shed. Whether you're a beginner or an experienced DIYer, you'll find this guide helpful in building your own shed. We'll cover everything from measuring and cutting lumber to assembling the walls and securing them in place. Follow along with us as we tackle this exciting project together! Don't forget to like, share, and subscribe for more helpful DIY tips and tutorials. Happy building!
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.

[@EverydayShed]

Complete List of Materials Used: homedepot.sjv.io/XYjjjy List of My Favorite Tools for DIY Shed Builds: amzn.to/3TNPlcS DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.

[@NorthernCabin]

I’ve watched at least 50 videos on building walls for a shed, and this one is the most clear on direction. Thank you!

[@EverydayShed]

Thanks for the support 👍

[@spicemasterii6775]

Yes!!! This is the best

[@insilico3251]

You could also definitely use a hammer and nails. Also I know you are experienced but I noticed one bad habit you have, You rest the 2x4 on your left knee to cut. If the skill-saw binds and you drop it and aren't using a skill-saw with an auto brake then the blade can easily cut your right thigh, You should try cutting on your right knee to the outside of your body so this cant happen. Great video's by the way, 10/10 information.

[@EverydayShed]

Oh yes! Hammer and nails would work and many people that don’t have access to power tools would go that route… And, thanks you so much for pointing out the way i used the knee, you are right! Safety first I shouldn’t done that.

[@readyplayer2]

Very informative, and clear. Thank you! I love the combination of stop blocks and angled 2x4 support used to hold the wall up while you level, so much better than having the wall wiggle around as you're trying to attach it.

[@EverydayShed]

Thanks for the feedback.. I will try to continue sharing these tips as much as possible.

[@JohnSmith-ef6rg]

Wow man! Exactly what I was looking for! I want to build a small office since I work from home. This is exactly what I was looking for!

[@trxtech3010]

Is it exactly what you were looking for? Or just what you were looking for?

[@EverydayShed]

We are still working on the plans and material list… sorry that we pushed the video out too early. 😊

[@spicemasterii6775]

Me too. Lol. Thank you

[@southbayproducts5371]

Thank you Sir. I will copy your build just what I need nice work

[@EverydayShed]

Awesome, best of luck on the project.

[@UnitedStatesCoastGuard-eb9km]

Outstanding video! 9:18

[@EverydayShed]

Thanks so much!

[@richarddiaz8248]

Thank you I made my floor with your video 🎉

[@EverydayShed]

Nice! Thank you for watching... I hope everything continues to progress well with your build!!!! Thanks for sharing!!!👍

[@nikkion2140]

You are fantastic. I hope one day I have the gut to make a start. I am a woman!

[@EverydayShed]

Thanks for supporting the channel... I believe anyone can build this with the right tools and guidance. I hope you get a chance to build your shed one day!!! Good luck👍🛠

[@BigBuckGetter]

Great job!!

[@EverydayShed]

Thanks! I am happy you enjoyed it… 🎉

[@anthonyderosa5181]

I don’t see the plans or material list. Love the videos and the shed.

[@EverydayShed]

Working on them… should be available in couple weeks along with the roof video. Thanks for watching!!

[@stevesaunders6672]

When laying out your studs . The first stud is 15 1/4 to center this way your plywood breaks on center of stud! And on end walls you need to figure from outsid corner or you have to cut and waste plywood! use your straightest lumber for the top plates and reverse crown the plates and the wall will be straighter , And don't forget to crown your studs and floor joist

[@EverydayShed]

Thanks for the feedback Steve 👍

[@MiguelMartinez-gv7pl]

Do you need any permits to build one of those in your backyard

[@StateBoysLouisiana]

Thank you this is a great video explaining this

[@EverydayShed]

You bet 👍

[@afathersjournal1584]

I would have used structural screws on corners, 12s for headers, structural screws on corners of door opening and on base plates, double rim joist, blocking, insulated under the decking, metal brackets on joist connection to rim and where rim meets rim, California corners to recieve insulation, glue on headers ALL overkill but for sure you can move it and not worry lol good job 👏 though on a simple shed

[@EverydayShed]

This is a great tip! and this is what will differentiate these shed builds from the cheap shed dealers, for sure we want to build it better while watching the cost. Thanks for this.

[@spicemasterii6775]

What size nails for framing?

[@EverydayShed]

Here is what I used www.homedepot.com/p/Paslode-3-in-x-0-120-Gauge-30-Degree-Brite-Smooth-Shank-Paper-Tape-Framing-Nails-2500-per-Box-650836/204362426

[@user-zd8wf3pl5i]

Is there a way to know what are the other “Everyday” channels?

[@EverydayShed]

Hey there! @everydayhomerepairs, @everydaysolar and @everydayshed

[@chevytech7306]

This dude sounds like one of the dudes from group x - shwiftyfive

[@WalterWhite-rg6tw]

Why didn’t you add blocks in between your studs?

[@EverydayShed]

Blocking would definitely make the walls more sturdy. Great tip, definitely worth looking into… thanks for watching 👍

[@katame_no_shi]

1:21 my boss has told me of how many times workers have cut themselves doing things like that

[@EverydayShed]

He is right, safety first, i will try to be more cautions moving forward.

[@sgnt9337]

I think screws are way too expensive ($10/lbz) and overkill. Air tools are also unnecessary. I used 10d and 16d nails and a framing hammer for my shed build, with good results. Though it seems today even nails are stupid expensive if bought a pound at a time.....

[@EverydayShed]

Oh 100% agree material price in general are getting out of hand....

[@ZeroColdx911]

It’s missing the list

[@EverydayShed]

Yes! Sorry, but we are still working on them… should be available in few weeks along with the roof video. Stay tuned!!!

[@ColonelKlink100]

@@EverydayShed I'll be watching for it.