Easy left Chest logo placement on POLOS/HOODIES

[@chazmartdesigns4308]

That sliding the shirt technique had me feeling foolish. Simple solution for a simple issue! Keep producing these starting my own shop and you tell truths with no sugar coating.

[@MrTShirt007]

Glad I could help! Stay tuned and thanks for watching!

[@ErinCaldwell-nn3il]

Thank you! This was so simple and easy, really made my first- timer embroider project easier! 🙏💕

[@MrTShirt007]

Glad I can help! Thanks for watching

[@yvettecurcio2863]

Glad I found you, was having problems placing my logo on hoodies. Appreciate you!

[@MrTShirt007]

Make sure to subscribe for other helpful videos with logo placement!

[@ashleybrooks1117]

Your videos have helped a lot! Thank you! Great advice!

[@MrTShirt007]

Glad I could help!

[@hannahellis4549]

Kept it simple to the point. Thank you so much.!

[@samanthaclarke1460]

Love how thorough you are!

[@MrTShirt007]

Thanks for watching! Glad I could help!

[@marciacampbell246]

Thanks for this because i have already watched like 6 videos and still didn’t have it right ..UNTIL I found this video ! Thank u so much Mr T ❤

[@MrTShirt007]

Glad I could help! Thanks for watching! Also checkout this video. kzbin.info/www/bejne/epqThaOBn9Sdb6s

[@CassandraLytch-Colter]

Thank you. I have 3 polos to do and anted to make sure I line them up correctly.

[@MrTShirt007]

Glad to help

[@gabrielagomez6790]

Thank you for your videos. So simple to the point and easy to understand!!

[@MrTShirt007]

Glad it was helpful!

[@LanceMcGrew]

All fine for that size 3.5" square on a large size but what about all the other size logos on other size garments? And what to do when you have logo on left and name on right?

[@ThurmondGoins]

Good looking out❤

[@acerachael182]

Hi, thanks for the video. When making shirts/hoodies with the same logo do you scale it up and down in size relative to the garment size?

[@MrTShirt007]

@@acerachael182 the size shouldn’t change unless your doing plus sizes or kids of course!

[@visionarybrands]

🔥 keep going

[@MrTShirt007]

Thanks for watching!

[@palcodepeter747]

Great tip. Well explained. Thanks bro!💪🏼👍🏼😜

[@MrTShirt007]

Any time!

[@lisaeaster5364]

Good morning if you go a pocket on that side can you still put a logo

[@MrTShirt007]

Absolutely just might have to adjust the size. Thanks for watching and stay tuned!!

[@BeauGinn]

Thanks brother , much love

[@MrTShirt007]

Any time

[@jamjars5444]

Great video for people like me starting off in this kind of thing. If I can ask though man, I have a heat press (recently purchased) where it doesn't display the pressure (just a turning nob at the top), do you know what level of pressure to mainly use first and foremost, and also how to get the right amount of pressure from a heat press that doesnt tell you? I've seen somewhere that you can press TOO HARD and I ruined a tshirt doing that, and obviously going too soft on the pressure means the design wont gell with the shirt, so how do I know? I HAVE googled this but not seeing a decent answer on it man so hopefully someone on thr ground doing this for real can help me, thats what I's hoping anyway. Aight man peace and thanks for the help in advance!

[@MrTShirt007]

Great video topic for beginners! Subscribe & stay tuned. Vid coming soon

[@angelajones1741]

Great videos Mr. T. Sooo! helpful. Glad i found you. If it's a 5X polo, what would the placement be inside the seam width wise? And will 4x4 be a good size for the logo?

[@MrTShirt007]

Maybe a half size bigger on each side and just make sure the logo is centered to the shoulder seam

[@tnick3049]

Great explanation. Thank you!

[@MrTShirt007]

Glad I could help!!!

[@blessedchild4697]

Will I need a machine to make the logos? I am wanting to make a shirt for my husband

[@MrTShirt007]

Where are you located? I can refer you to a dtf supplier

[@blessedchild4697]

I am in Atlanta, Ga.

[@AbigailLopez702]

I love this video thank you. Super helpful!

[@MrTShirt007]

Thanks for watching and glad I could help. Stay tuned for more tips and tricks!

[@edricferdinands8219]

What method do you use for the different sizes? For kids sizes, for example, I don't think the four-finger method would be ideal.

[@MrTShirt007]

Kid sizes usually 2-3 fingers depending on size.

[@cricutobsession88]

Hello so for a small it’s fingers , m ,l,xl Its 4 n the plus sizes like 1x & up is 5 fingers down ?

[@MrTShirt007]

Exactly

[@michelleporter6751]

How long did you press the polo shirt for? What is the placement on polo shirts for XS, Large and XXL.

[@MrTShirt007]

I will be posting a video this week on polo placement. Subscribe to the channel and stay tuned!

[@tinytarleton2753]

Thanks this really helps me.

[@MrTShirt007]

Glad I could help! Stay tuned for more tips and tricks!

[@scottduke47]

What kind of heat press would you recommend to a new guy

[@MrTShirt007]

What’s is your budget?

[@niffyofficial_]

what size is that logo?

[@MrTShirt007]

3.5 x 4 thanks for watching!

[@loreinnemorazan1351]

Hello, does this apply to XXL crewnecks as well?

[@MrTShirt007]

Updated video coming this week!!

[@makeupbymingles]

This was so stupid easy! Thank you, better thank measruting with a floppy tape

[@JayGilliland-wl4dq]

Thank you!

[@MrTShirt007]

You bet!

[@annettamoore4234]

Thank you soooooo much

[@MrTShirt007]

Hope you subscribed and stay tune for more tips and tricks! Thanks for watching!

[@tarageisser9083]

What about for zipper hoodies?

[@MrTShirt007]

Use the same procedure sliding the shirt to the edge where the zipper is not on the press! Thanks for watching stay tuned for more tips and tricks!

[@danielleeasley9907]

Does this method work for a 4X hoodie?

[@MrTShirt007]

You wanna use 5 fingers being it’s a plus size.

[@danielleeasley9907]

@@MrTShirt007 thank you so much for the quick response!

[@StanScott]

Very nice. Thank you

[@MrTShirt007]

Most welcome

[@warniaweise2719]

How long you press that polo for?

[@MrTShirt007]

20 secs. Thanks for watching!

[@RealTalkBench]

Cheers Buddy

[@MrTShirt007]

Thanks for the visit

[@sherdal2634]

Place your 3.5 inch by 3.5 inch size logo 1.5 inches from the bottom of the 2 button seams. Thank you.

[@MrTShirt007]

Stay tuned for more tips and tricks!

[@smilingstill9527]

thank you

[@MrTShirt007]

Thanks for watching stay tuned for more tips and tricks!

[@TANKDABOSS]

I gave a like just cuz nigga is name Mr t shit lol 💪🏾

[@MrTShirt007]

Lol thanks for watching!!

[@TANKDABOSS]

@@MrTShirt007 thanks for the info you definitely just helped me out 🙏🏾

[@chriskingking2061]

Thank You!

[@MrTShirt007]

You're welcome!

[@mowilla]

thank you

[@MrTShirt007]

Welcome!