Easy LIGHTSABER TUTORIAL - Tracking | DaVinci Resolve Fusion

  Рет қаралды 24,979

David Harrison

David Harrison

Күн бұрын

Пікірлер
@joinizwe
@joinizwe 5 ай бұрын
That is the smart way 🤩
@KKP_yt
@KKP_yt 4 жыл бұрын
Thank you so much for this! PLEASE keep these coming
@HikingWithCooper
@HikingWithCooper 2 жыл бұрын
That was brilliant. I just learned so much, so fast.
@rishansookhoo1544
@rishansookhoo1544 2 жыл бұрын
thanks this helped so much
@ishanbhattacharyya8842
@ishanbhattacharyya8842 3 жыл бұрын
Thanks Man!!!
@charlesn
@charlesn 2 жыл бұрын
Great job David. I watched a few other tutorials and I definitely think yours is the best of the bunch. Keep up the great work. I wish I saw this video before my last project started so I could have added the white paper marks on the light saber...would have saved me a lot of time!
@dakr-q2g
@dakr-q2g Жыл бұрын
Thank you so much!
@TomCalver-mn5vr
@TomCalver-mn5vr 4 жыл бұрын
at 3:57 in the video what keys are you clicking to set the frame and then move forward?
@davidharrison5127
@davidharrison5127 4 жыл бұрын
Sorry forgot to say, its just the arrow keys. Left goes back one from, right goes forward one frame. So just moving a few frames at a time
@tombro8080
@tombro8080 4 жыл бұрын
@@davidharrison5127 thanks!
@p.c.windhamparanormalroman4339
@p.c.windhamparanormalroman4339 2 жыл бұрын
You hit those keys any harder and you will go through your desk. Take it easy.
@davidharrison5127
@davidharrison5127 2 жыл бұрын
🤣🤣 go hard or go home
@sushimattch7438
@sushimattch7438 2 жыл бұрын
can you please make a video on if the lightsaber goes behind you or an object and how to make it appear that way? thanks!
@davidharrison5127
@davidharrison5127 2 жыл бұрын
Great idea. This is something I should be able to do as my new job allows more hours for making videos 😊
@dcfanforlife533
@dcfanforlife533 2 жыл бұрын
@@davidharrison5127 please do!!
@JebrilKessler
@JebrilKessler 4 ай бұрын
Would 2 peices of black tape on my toy lightsaber be enough fro tracking. And should i do 2 little dots or wrap a good 1 inch tape around the whole blade at the top and bottom?
@mikeheimer537
@mikeheimer537 2 жыл бұрын
Not sure what version you are using , but 17 isn’t the same. First off every time I publish, it locks up the program and I have to reboot it. Second even though I created 2 trackers when I go to publish it only shows one on the list even though I am clicked on 2. Then there are a number of choices to publish to which you didn’t have. Maybe the ones I am choosing are causing it to lock up?
@davidharrison5127
@davidharrison5127 2 жыл бұрын
I was on DR 16. Tbh I haven't tried it in the DR17 to see if much has changed. I will look to do an updated one
@CjzombiecatOfficial
@CjzombiecatOfficial 7 ай бұрын
How did you put the tracking points on at the begining
@ClubBrick
@ClubBrick 3 жыл бұрын
This all looks different in DaVinci 17. The glow has different options etc 🤔
@davidharrison5127
@davidharrison5127 3 жыл бұрын
Yes I believe some of the options have changed. But can achieve the same result with a little experimentation
@NotYourAverageBrightonFan
@NotYourAverageBrightonFan 2 жыл бұрын
Yeah I’m trying to figure it out too
@whitefish-willy
@whitefish-willy 4 жыл бұрын
This was sick, made a sweet light saber for a music video I'm making, do you know what I'd have to do if I have a scene with two light sabers? Like a dueling scene?
@davidharrison5127
@davidharrison5127 4 жыл бұрын
That makes things much more complicated! You could track where possible, but would likely have to do a lot of manual positioning! There is another option where you use green or blue coloured props, and then you can chroma key them to save any positioning at all. I will look to do a tutorial on that method
@whitefish-willy
@whitefish-willy 4 жыл бұрын
David Harrison thank you!
@davidharrison5127
@davidharrison5127 4 жыл бұрын
You should link the video if its complete. Would love to see it
@whitefish-willy
@whitefish-willy 4 жыл бұрын
David Harrison I’ll make sure to when it drops 👍🏻
@whitefish-willy
@whitefish-willy 4 жыл бұрын
@@davidharrison5127 kzbin.info/www/bejne/gqbbi5x7btR3a7c
@masscreationbroadcasts
@masscreationbroadcasts 4 ай бұрын
I ran into a bit of a problem which I fixed, that being that it twisted the shape of my saber into an S shape when it tracked the points. I twisted the polygon shape at the start before tracking and it fixed, but I'm pretty sure my error was not meant to happen.
@JCurtisMedia
@JCurtisMedia 3 жыл бұрын
This was very very helpful and after watching a couple of times it really will help with some of the basic features of Fusion. Thanks for posting! #NewSub
@ehnorst
@ehnorst 4 ай бұрын
Comment fait on pour sélectionner le glow ? Je ne le trouve pas
@toufiquzzaman_sabbir
@toufiquzzaman_sabbir 2 жыл бұрын
Where did you get the pipe? 😲😲
@davidharrison5127
@davidharrison5127 2 жыл бұрын
From my girlfriends clothes rack 🤣 It seemed a more useful purpose
@fane_fane
@fane_fane 4 жыл бұрын
in the 1:25 coin on which I press to put the glow effect
@rishansookhoo1544
@rishansookhoo1544 2 жыл бұрын
drag the glo effect and click it on to the polygon
@ehfosse
@ehfosse Жыл бұрын
what do you press to activate glow??
@natalieschmitz7035
@natalieschmitz7035 2 жыл бұрын
How do you get both of the windows 1 for the saber and the other for you’re video
@davidharrison5127
@davidharrison5127 2 жыл бұрын
There is a square box at the top of your window to click and open/Close the 2nd window
@thunderprowfilms5917
@thunderprowfilms5917 2 жыл бұрын
if the hilt and tip of my lightsaber are different widths, how do I adjust the width of the individual ends of the polygon mask?
@davidharrison5127
@davidharrison5127 2 жыл бұрын
Great point. You would have to use a 4 point poly. So you can vary the distances at each end
@HeinleinShinobu
@HeinleinShinobu Жыл бұрын
does it work on fast moving object?
@davidharrison5127
@davidharrison5127 Жыл бұрын
Not great. With fast moving object you would be better following with a 4 point mask, then you could increase the size of the mask to create sort of light blur as it follows the sabre.
@tanvirshajahan
@tanvirshajahan 3 жыл бұрын
why when i go for next frame i lost the drawings on next frame
@slash5068
@slash5068 4 жыл бұрын
what key do you press to get the glow
@SuperMineFilms
@SuperMineFilms 4 жыл бұрын
I need to know too
@davidharrison5127
@davidharrison5127 4 жыл бұрын
Sorry guys. How foolish of my not to say.. Its shift+spacebar brings up a search list of nodes
@slash5068
@slash5068 4 жыл бұрын
@@davidharrison5127 thanks :}
@Kenjiiscool
@Kenjiiscool 4 жыл бұрын
how would i add lasers that im deflecting?
@davidharrison5127
@davidharrison5127 4 жыл бұрын
In a very similar way. Use a background for the colour of your lasers. Use a mask that you will animate for the movement. Its a good idea, I might do another tutorial with me deflecting some lasers
@therealzyto4624
@therealzyto4624 4 жыл бұрын
I cant get the glow on the light saber help please
@davidharrison5127
@davidharrison5127 4 жыл бұрын
are you using the correct glow node? There are 2 options when using glow
@therealzyto4624
@therealzyto4624 4 жыл бұрын
@@davidharrison5127 I am
@davidharrison5127
@davidharrison5127 4 жыл бұрын
@@therealzyto4624 seems very strange, you have the nodes in the order shown? Using the glow and the soft glow? Is the lightsaber showing, just not glowing?
@stirlingbalazs2853
@stirlingbalazs2853 3 жыл бұрын
@@davidharrison5127 what are the two options? I have this kind of problem as well, that if I click on the little "glow" rectangle, things come up in the inspector
@agames426
@agames426 4 жыл бұрын
i stuck at the polygon part
@davidharrison5127
@davidharrison5127 4 жыл бұрын
Stuck how? can you explain and I will try and help your resolve
@agames426
@agames426 4 жыл бұрын
nevermind i got unstuck
@Julianos373
@Julianos373 7 ай бұрын
good video, But you are Doing it way to fast, slow it down, so we can follow XD
@reyvaz2951
@reyvaz2951 2 жыл бұрын
I had to stop washing this because all that noise in the back its hard to concentrate.
@davidharrison5127
@davidharrison5127 2 жыл бұрын
Thanks rey. Better microphone going forwards 😊
How to CAST SHADOWS on real world objects | DaVinci Resolve Tutorial
26:42
Cheerleader Transformation That Left Everyone Speechless! #shorts
00:27
Fabiosa Best Lifehacks
Рет қаралды 16 МЛН
Photoshop Tip and Tricks  For Beginners
0:49
Smart Graphics
Рет қаралды 1 М.
5 Creative MASKING Effects You MUST KNOW for Davinci Resolve
11:25
Billy Rybka
Рет қаралды 529 М.
The Most Satisfying Color Change Effect Ever In Davinci Resolve
9:41
The End of Blu-ray Players.... is it time to panic?
5:23
Boutique Blu-rays with Elliot Coen
Рет қаралды 39 М.
Rogue three
2:05
shrimpo
Рет қаралды 99
Common Jedi Fails - Remastered
2:30
Darth Jedi Cody
Рет қаралды 16
аптека этажом ниже панин
0:48
Shorts Master
Рет қаралды 3,3 МЛН
Hảo bà mẹ người anh Tham Lam Và cái Kết#tiktok#short
0:37
Vân dưa hấu
Рет қаралды 2 МЛН
ОВР Шоу: Добрый мэр
12:13
ОВР Шоу
Рет қаралды 1,8 МЛН
Хорошее время было!
1:00
Дмитрий Романов SHORTS
Рет қаралды 1,1 МЛН