Easy To Carry Everyday: New 10mm Springfield XDm Elite 3.8 Compact OSP

If you are familiar with the Springfield Armory XDm series, you know that the short grip version with the 3.8 inch barrel is called the Compact. It is offered now in my (Striker's) favorite caliber: 10mm! Hooray! This is their new Elite Series version which offeres different slide serrations as well as a magwell and most importantly, the META trigger system! This is an OSP pistol, which means that it is available with a red dot mounting system. There is also a version with a Hex Wasp red dot included.
Links to some of related reviews:
XDm 4.5 in 10mm: • New 10mm from Springfi...
XDm 3.8 in 9mm: • Springfield Armory XDM...
Xdm 3.8 in 40 S&W: • Soft Shooting .40 cal ...
XDm 3.8 in 45 ACP: • Best 45 ever? Springfi...
Please check us out on:
Facebook at: / hammerstriker
Patreon at: / hammerstriker
Twitter at: / _hammerstriker
Instagram at: / hammer_striker
Our new web page at: www.hammerstrik...
See the Affiliates page for other useful links.

[@pauldvorsky1969]

Springfield Armory is a Leader in the Industry

[@fkrr5]

Yeah, I respect that they're willing to put 10mm in everything.

[@whatsup24_7]

I've been carrying this for the last 3 weeks and I'm in love. Everything about it is excellent. I did take the flared magwell off though, I like it much better without it.

[@ghodge82]

Nice! I’m waiting on the paperwork to come back then I pick mine up next week! I plan on getting the extended magazines for the grip alone, the rounds are a plus. Are you using an optic or iron sights?

[@whatsup24_7]

@@ghodge82 Next week? What country are you in that takes so long to get it? Here it's about a 15 min process and then you're walking to your car with it. I bought the optic ready version with just the irons. I wanted to decide which red dot I wanted if I go that route. So far I haven't felt the need for one. I shoot it well.

[@timmyburch9126]

Yep much better with magwell off. 11rd mag gives a perfect full grip

[@whatsup24_7]

@@timmyburch9126 It's on me right now out shopping.

[@nahtay72]

Agree. I also put on cowitness sights.

[@CyborgZeta]

The grip safety honestly sold me on this. I was looking for a good 10mm pistol.

[@rainworks5155]

Anyone looking at 10mm and worrying about recoil, remember that 40sw is the shortened version of 10mm. You can get 10mm loads that are ballistically the same as 40sw, or you can get the hot loads that are in the 6-800 ft lbs range. Don't be scared by 10mm's power. The majority of loads by common manufacturers are practically 40sw loads. I'd you want hot ammo buy Fiocchi, Magtech, or Sig Sauer. Federal, Remington, and Winchester for example are low power and easy to shoot. The above example are with 50 round boxes of basic FMJ or JHP, not counting premium or boutique ammo. So remember 10mm is not scary! It's highly versatile! PS, hot starts around 1250 fps, mild is 1000-1100 or so fps for a 180 grain bullet. Just an fyi.

[@miketyson8933]

Naaa people who buy 10mm knows what's up lol we love our 10mms because of how it opens up those hollow points ; )

[@rainworks5155]

@@miketyson8933 Yes Sir!

[@tomcatmcgillicutty6913]

Any one scared of 10mm recoil is a wuss,,,,let em be scared

[@miketyson8933]

@@tomcatmcgillicutty6913 agreed! I love it! My 3.8 Elite 10mm is a little more snappy then my 4.5 with a bigger slide but then again when I put the red dot on it that weight tamed it down a bunch. I can stay on target and not have to find target like some .44 mag revolver or anything. The 10mm is really at that line where you can stay on target and shoot LOTS of rounds on target!

[@tomcatmcgillicutty6913]

@@HaCubbee I'll take that as a compliment,,,,we are "cringeeeee" and don't you forget it....

[@unixfool]

Man, that handgun is SHARP! The internals are beefy ASF too. Might have to add this to my wish list!.

[@Elidogz]

Very very happy with my purchase of this gun took tha magwell off as well & gave me a perfect grip . Picked up a holosun HS507C . When you buy this gun a card comes with it you can contact springfield & they will send you a free footprint to co witness with the optic you choose . Dont really like the big bulky hex optic that comes with it so thats why i chose to buy a smaller optic & the specs with that holosun are way better lol

[@MrBuckeye63]

I own the XDME 10mm Compact Absolutely perfect pistol My favorite caliber Parked all my Glocks sans my 27 The mag well came off at the LGS when I picked it up My first XD was before they were XDs … the HS2000 I feel the XDME are absolutely the best quality polymer pistol on the market Best pistol purchase I have made in 38 years

[@micknordell]

Got this a couple weeks ago! She's a beauty! You definitely know that your shooting 10mm. A little snappy for sure but in my opinion much easier to handle and control than the other compact 10 glock 29. One more thing, I have very small hands and when I took it out the first time the magwell dug into my pinky so bad it made this gun miserable to shoot. I immediately went home and removed it and problem solved. I highly recommend taking it off, it's not necessary. Plus you can use the bigger 15 round mags without it. This is a beast for a edc. Thanks for the video

[@Josh-mk7ok]

Do you feel you can quickly and accurately put multiple shots on target with it? Seems like an important aspect for an edc

[@christopherroberts916]

Just bought one yesterday have shot it yet but if it shoots like my other two Springfield pistols I no I’m in for a real treat

[@thebusterdog921]

Got one of these in 45acp in August of this year. I never was a fan of 10mm or 40cal. Got the deal that the Pistol came with 4 10 round mags and a really useful range bag that's large enough for everything you need for a day at the range. I found it is a real tack driver inside of 40 ft which is exactly what it is designed to be. Out the door for $650 for an extremely functional quality pistol. I am used to grip safeties as most of my pistols are equipped with them. There is a fool on KZbin that has taken a piece of electrical tape and wrapped it around the grip on the grip safety but I figured I would give him the benefit of the doubt and watch his video. But once he started to speak I realized he didn't know what the hell he was talking about and moved on. Good video, "liked and subscribed", keep them coming 👍.

[@backcountrywesternhunter7452]

Bought one two months ago and absolutely love it!!! Such a great, quality built gun. Extremely pleasant to shoot for a 10mm and extremely happy with the accuracy. As with the grip safety, I honestly do not even notice it while shooting the gun. I actually like the purpose of it cause I usually always have my guns loaded. So just a small but effective safety feature. So when firing, I’ve never had it cause an issue, get in the way, felt it, etc. I just don’t even notice it while shooting. So if a person was to NOT purchase this gun or one like it because of any concerns of the grip safety, they would be massively selling the gun short and would be making a big mistake in my opinion. In fact I love this gun so much I am going to purchase another just to have a second one.

[@lvl-savage-lvl6659]

4 months after how’s the gun been man ?

[@sethdaboss245]

@@lvl-savage-lvl6659 Shity thing blew up when shooting hollow point

[@lvl-savage-lvl6659]

@@sethdaboss245 yeah what a lie bro come up with a new one I’ve been shooting 220gr HARD CAST like a maniac I also shoot hollow points and extreme defender loads

[@3wheelmannc860]

Looks fantastic. Waiting to get my hands on one to make my final decision.

[@ferretswithguns7259]

Bought one the day it came out. Mounted a Holosun Vulcan and love it.

[@Sleepy_Alligator]

I have the 9mm version of the pistol, XD-M Elite 3.8 Compact OSP, with a Holosun HS507k having the ACSS Vulcan reticle. Very pleased...

[@biebersydney1999]

I carry a XDm 3.8 in 40SW and love it. It's had 1000's of rounds through it and has never had one single jam or issue. Nice groupings there also.

[@bustabass9025]

I concealed carry one in an Urban Carry IWB holster. I don't know why everyone complains about the mag well. I left mine on. I have long large bass player hands and fingers. It is comfortable to grip, and a joy to shoot. I stoke it with my 200 grain handloaded, hardcast, gas check lead bullets. It's all business baby!

[@andy1209na]

I can’t wait for Springfield Armory to come up with the .45 acp version of this pistol.

[@KsooTheYouTuber]

Yk they been have the 9 40 and 45 was out first

[@KsooTheYouTuber]

All the vids are atleast 7 years old

[@andy1209na]

@@KsooTheKZbinr yes they have, but I meant the new elite compact. I do have the older version 3.8 compact in 9mm, it is one of my edc. Just wanted to own one in 45ACP.., cheers.

[@dq9780]

I have this in .45 and she’s perfect. It shoots so soft and I love it

[@veevans01ify]

I carry mine very often. Is the size of the Glock 19. I use the 11 round magazine without the flared mag Well. Mine came with the dragonfly installed. It is a great shooter. Extremely accurate. No malfunctions. Handles underwood ammo very well. I carried a Glock 29 GEN four for two years. It was great also, but this pistol beats it. I also bought blacked out suppressor height sights for it directly from Springfield.

[@ronhunt9396]

Shot my new XDME 10mm today for the first time. Loved it but I'm getting the dot put on it that came with the gun. I really didn't know what to expect because I also have a Ruger Redhawk 44mag. No comparison in kick . 44mag has way more kick. Took it to my gun guy that I bought it from to have the DRAGON FLY put on it

[@leonardonicastro7302]

My hand loves that magwell!

[@bishopgeorge1333]

I have one and I was able to take it out this week and all I have to say it is a hand canon, I load mine up with some 180gr Underwood and some 175gr Critical Duty and some 200gr Federal it ran flawlessly it's in my edc now. I did took that flare off and put some talon rubber grip on it, I had the G29 and I wanted to get another 10mm but I wanted to wait and look at the new XDM Compact 10mm and man I'm glad I did. Since SA with your purchase give you 20% off of what ever they had so I bought the 15 rounds extended mag.

[@2A_lifestyle]

Does the Springfield handle better than the g29?

[@tjkeegan470]

My god that recoil looks SCARY. I have one being shipped to my local gun store & now I’m iffy, I’ll manage though

[@796andy2]

you'll be fine

[@tundrafunk7402]

I’ve run 180gr to 230gr and with good grip/recoil mitigation it’s surprisingly manageable. Easy to quickly get back on target.

[@MrBuckeye63]

Recoil is totally manageable.. even with UW ammo

[@kyleritchie50]

Haven't shot mine yet, so I can't comfortably carry it until then...however, it feels great. I had issues with the magwell snapping at the thin point (feels better without anyway) and the screws on the filler were over torqued and stripped. Otherwise, it feels great. It holds 11 rounds with the stock mags though. It says 10, but it'll hold 11 (it's in the manual).

[@ronhunt9396]

Picked up my XDME 10mm today and when I came home my 1000 rounds was delivered. Stii got to put the DRAGON FLY on

[@mikedgg2]

Beautiful EDC!!

[@1sonjohn44]

The shorter magazine is 11+1. For some reason. Springfield hasn't corrected the numbering

[@StevenRogers-hw9dj]

With the flush baseplate on, it's a 10-round mag.

[@lvx861]

Mags are actually 11round mags but for some reason say 10. 11 plus is great

[@jakelogan7542]

Can you do a review of the new Smith & Wesson M2.0 10mm please?!

[@toncatboy]

I left extra oil when I cleaned mine, and it felt like a 9mm when I shot it

[@ronhunt9396]

Got my new XDME 10mm today. Cant wait to shoot it

[@jeffreylocke8808]

If I got one the slide and barrel would be shipped off to Mag-na-port for their porting treatment. Have a muzzlebrake or porting on all my pistols but one. A 22 LR GP100 ten shot cylinder revolver.

[@corbbeatfarm]

I have been caring it since it came out I got it with the dragonfly red dot I added suppressor high sights so I can co-witness. Springfield did their thing with this one

[@ghodge82]

Where did you get your suppressor sights??

[@corbbeatfarm]

I bought the first set from Springfield armory but they don’t have nightsights they come only in black and the ones that I currently have on my fire arm now are from Troy industry Which have nightsight capability

[@ghodge82]

@@corbbeatfarm awesome I should’ve figured they’d have some. I Just ordered irons for my AR by them lol I’ll have to check!

[@nahtay72]

I can't find a holster that has anything less than a two to three months wait.

[@ghodge82]

@@nahtay72 dude I just emailed Springfield themselves for that cheap ass holster they offer and the email back said 3minth+ unknown restock time on RIGHT handed model of said holster…

[@DominicLacerenza]

Looks like a nice pistol, I just hate short receivers like that on a carry gun. Only gives you a 2 finger purchase on the grip. Can't do it. Especially with 10mm

[@thebusterdog921]

Not really optics ready, you will need to order an adapter plate to mount the reddot of your choice. I now own both the 45acp and 10mm of this gun. Both fit my Wright Leather Works OWB holster as both are the excact same size, except the barrels and probably recoil springs.

[@michaelthompson7570]

It did not jump around or hurt your hand because most 10mm is just 40 cal rebranded ammo. Try some underwood or buffalo bore bore ammo,,it will liven this little powerhouse up.,,it can handle it but it lets you know ,,,,,,,,

[@tristantimothy1004]

Alaskan bushman here. W the 220 hardcast Underwoods ( bear bullets) i can pull ( From a sideleg holster) & put 4 into a 5 inch circle @ 15 yards in just a tad over 1 second w/o using the sights no problem. The ergonomics is perfect for my hands. In a bear attack theres no time to sight anyway. Recoil was NOT a problem & im a little guy. Couse its NOT the compact. Thoes short grips dont belong in bear country. The 190 grain Buffalo Bores monometals DID kick a bit more. Both rated at 1300 FPS. I think the non fouling coating on the Underwooods lubricated the bullet better & they both put just as big a dent into my 3/4 inch thick stainless steel plate. Both blew right through the 1/4 inch soft steel plate. The 10s are taking over Alaska over the big bore backup handguns. Lighter, easier to handle & WAY faster. The bear bullets are equal to a 41 mag w WAY more firepower & folks are more likely to keep their peice ON them because bear attacks come when you least expect. Usually when your 45/70 is out of reach instantly.

[@796andy2]

got mine today !!!

[@flyoverkid55]

I submit that these compact 10mm pistols will be the new Model 29's of 2022. Many will buy them, most will abandon them after learning how user unfriendly they are. I like the 10mm, but not in a compact package.

[@miketyson8933]

Well you're a beta male so that would be why, 10mm shoots just fine, if you're so worried about it get a ported barrel little guy

[@Swampytheroot]

I wish you had placed a round in the barrel with it removed to show the chamber support. I want to run 10mm at its full pressure loading, and that requires the case be COMPLETELY encased in the barrel steel to prevent any potential case issues. I thought that had been dealt with 30 years ago by strengthing cases, but I'm seeing videos of 10mm failures which seem attributable to lack of total support.

[@BMoore215]

Great Review!!

[@levyrogers6979]

Springfield manufacture some of the finest firearms on the market today. I look at the Springfield line up, when looking for a Sidearm or Rifle these days. Not saying that there are no other fine firearms manufacturers out there other than Springfield. I have had little to no problems with the Springfield products. When it's supposed to go bang they do. I run the cheapest, dirtiest to the better ammo. They eat everything you put into them. They just go bang. as long as you take care of them, keep them cleaned, oiled, greased, they will take care of you when needed. God Bless our Country our People, President TRUMP AND FAMILY. GUYS keep them tight. And take a kid or two with you to the range. It's up to us to pass this on. If this is to continue to be a free Nation. Again God Bless you all.

[@dylano7242]

Looks like this as small want go in, and even this small 10mm is snapping on the hand. But when aren't messing around and conceal carry this looks ideal.

[@FunkyPertwee]

I'll take one in .45acp

[@gruges2068]

I thought they held 11 rounds (11+1)??

[@walterhurdle9226]

You are correct. He got it wrong.

[@billj5645]

That uncomfortable magwell is the biggest negative to that model. It will make you want to work it over with a belt sander.

[@Rifleman-bb7vr]

Thank you great video

[@jdouglas1050]

I liked the plastic "suit" cases (as he calls them- they're just cases or gun cases) and doubt the foam and plastic that they were made of drive the price up much at all. The cardboard and bag are cheap. My Emissary .45 came that way.

[@lizzapaolia959]

Do you think this would be a good CCW for outdoor hiking i? Definitely looks like a nice pistol. Thanks for sharing your videos 🙏

[@mikedgg2]

I would probably remove the extra magwell though.

[@youngboyharless9769]

It's better without it. The magwell just gets in the way and makes it print more. Much better option over the Glock 29 in my opinion. Better sights, same size mostly. Little more weight but it helps mitagate those full power 220 grain underwood loads.

[@johncaban4310]

Sorry but it holds 11 in the magazine. Don't go by the markings on the magazine. 11+1

[@duaneshadd777]

Yep

[@JohnSmith-qy3nv]

Hammer Striker, Thank you very much for the highly informative video. I have one question though. You say that the pistol comes with 10-round magazines. On the website of Springfield Armory, however, it reads that it comes with 2 11-round magazines. Do the pistols that come with 10-round magazines have a special model number? Thank you very much in advance for taking the time to answer my question.

[@laloalonzo2461]

They probably meant it holds 11 one in the chamber

[@JohnSmith-qy3nv]

@@laloalonzo2461, Thank you very much for your reply.

[@miketyson8933]

@@laloalonzo2461 no they hold an extra round in the pinkey extention, way to give out false information, next time don't answer questions when you are clueless of the answer

[@willielowery8549]

Nice shooting 👍

[@Syddybear1]

I want this gun, but with a red dot sight, these sights will not co-witness. Could someone comment on changing out the regular sights so that I could co-witness?

[@skyiestosunsetrise2886]

Springfield 10mm is the freaking truth...I'm in love😒😒, uhm...my wife gotta sign these divorce papers😂🤣

[@matttorbush2662]

I have one of these. Love it! Just wondering. Does anyone think the recoil spring is rather light? It is very easy to rack this slide and it spits the brass pretty far when shooting. Mine has been flawless. Just something I noticed. Wondered if anyone else has noticed. Thanks!

[@charlesgreathouse7376]

Magwell on a compact pistol is goofy.

[@miketyson8933]

Agreed, I have the full size 10mm I can use it on lol I was going to get the Glock 29 just to mix it up but Springfield just come with too many extras to not buy it

[@lizzapaolia959]

Great video 😁

[@HammerStriker]

Thank you.

[@Neons1223]

Thanks for the review. Can you post a picture or quick video of the firearm with the magwell removed. Big hand syndrome..

[@walterhurdle9226]

The stock mag is actually 11 rounds.

[@Jimbowiejr]

True

[@pauldvorsky1969]

I have the XDM 5.25 10mm And two XDM Elite 10mm's in 4.5". 10mm's. And a Sig XTEN and S&W M&P 4.6" in 10mm.. No Glock.

[@dr.stevenpennym.d.3241]

HS Produkt makes the best firearms.

[@Lakanen263]

Good video thanks.

[@papmasterOST]

hey i seen this on rumble good sheet brother

[@semlohde1]

You say front slide rails are steel. Mine sure look polymer. Rear polymer too as you said. I was surprised.

[@positivereactions4044]

I live in Pennsylvania my range would look at me like I’m crazy if my gun wasent holstered on my belt and I walked in carrying a gun bag … gotta love free states

[@mael696]

I hope they will make a manual safety variant instead of grip safety, that would be ideal for me.

[@ricky89571]

Does it fit in the XDM 3.8 45 acp kydex holster. Thanks.

[@pancholeal121]

What 15 rd mag is for a full size 10 mm or 45 full size

[@MightyWhiteofYou]

I love the way everyone bashes .40; keeps my ammo available. Seriously.

[@jampav33]

I want to order grips for mine but 10mm is not offered through talon or other companies. Which frame size can I order to get grips on here? Thanks

[@Sirgromulus]

The XDM in .45ACP is the exact same frame size. This was confirmed by Springfield. I have Talon grips and a Vedders IWB holster made for the .45 that fit perfectly.

[@rod675]

A good coyote slayer...maybe? Sounds like fun to try..haha

[@BLACKWOLF-1911]

I'm on the fence about buying one. I worry about availability of 10mm.

[@miketyson8933]

Hammer is a he11 of a shot!

[@raulmachado182]

Are sights plastic or metal?

[@shooter-vx7xy]

How's the chamber support on it?

[@FREEDOMNOW33]

Hard hitting and penetration with the right ammo like Fort scot ammo

[@rockie307]

It's not really that compact. When comparing it to the glock 20 with both upside down on the table it's barely shorter with the 11 round mag. With 15 rounders in both the Springfield is actually a good bit taller. Also th large slide release sticks out and with a thin holster it's uncomfortable iwb. It's a good pistol so far just don't want people to be surprised how large it is in real life like I was. Wish the barrel was longer actually cause the barrel ain't the hard part to conceal the grip is.

[@caliber693]

Well, this is exactly why you always go to a local gun store and hold/handle/shoot a gun before buying one. This should be a rule of thumb everyone should follow.

[@rockie307]

@@caliber693 I agree but sometimes if the gun is never in-stock you just have to go off reviews. It's a good gun shoots great and all just isn't quiet as compact as some make it seem in the reviews. It's growing on me.

[@caliber693]

@@rockie307 I'm actually looking into which 10mm I want to get, and this may be the one. It was this or the Glock 20 Gen 4, but since this is optics ready I may get it. I would get the new S&W ideally, but it has too many issues sadly.

[@rockie307]

@@caliber693 I've had glock 20s for over a decade they work great if not shooting super hot loads. I've had this gun a couple weeks now and shot a couple hundred rounds so far with good results. I carry in the backcountry for grizzly. Only negative I see with xdm so far is higher bore axis and the open hole on the back of the slide let's alot of sand in when riding horses , atvs and such. Tough choice for me if I had to pick one over the other.

[@caliber693]

@@rockie307 I'm almost certain I'm going to get the XDM rather than the Glock 20 now after watching a few more reviews on it.

[@markferiole4749]

SURE WOULD LOVE FOR THE XDm TO HAVE 《SIDE SAVED 》I WOULD PUT MY 《1911 DOWN 》GOD BLESS

[@jonsays3762]

Oh jeebers just no. Then again, I’m coveting a 1911 kimber chambered in 9, so I’m admittedly nuts.

[@tomyen187]

I think the shooting footage in the beginning of this video is a Glock. Therefore, we cannot see how it performed in the range.

[@HammerStriker]

Oops - good catch - I used the wrong clip (we filmed comparison footage the same day) and neither of us caught it during editing and QA. There is footage of this gun at the end, the screwup is only in the beginning clip).

[@tomyen187]

@@HammerStriker I missed the video in the end and you missed the video in the beginning. We're even now~p

[@Neons1223]

Thanks for the review. Can you do a quick video or post a picture holding the gun with the magwell removed. Big hand syndrome..

[@andrewcornette7916]

Any link for a mag grip extension?

[@andrewcornette7916]

Or IWB carry holsters?

[@BU1Lander]

I am surprised they put out the 10mm after the original 9mm, instead of the .45. Having said that I would rather have the 9mm. It just seems it would be a better choice all around, unless you're using it for something specific, like a woods gun.

[@kvshsinatra4011]

I got the 9mm looks just the same tho probably a lil heavier

[@robertramirez2076]

The problem that everyone is having with the magwell is due to the bad design of the grip! It's too short, therefore too small for the average sized hand! A larger hand just does not fit on the grip and injures the pinkie finger!!! Personally, I like the gun, but hate the short grip! For that reason and that reason alone, I will not buy!!!

[@jakeb8298]

Needs thumb safety

[@whatfreedom7]

That recoil looks a little stout in that little thing.

[@johnnyblaze4363]

If I could take off the grip safety I would buy one

[@bsmith2947]

Needs a thumb safety for CCW. Safety 1st.

[@werewolf5674]

Night. It.

[@WV591]

Springfield (once upon a time my favorite gun) should close it's doors after releasing that junk Hellcat.

[@62dobie]

What about the Hellcat you dislike? What makes it junk?

[@maximusjoseppi5904]

have you ever wrestled with someone on the ground for your life barely having a grip on your gun and the grip safety worked? thats why theyre bad. theyre not bad for most scenarios, theyre bad for some. this is a fantastic gun but that grip safety needs to be pinned to be carried safely.

[@bishopgeorge1333]

Lol, that's is when you need to know hand to hand combat.

[@62dobie]

I've never pinned any of my 1911's. Why would this be any different?

[@maximusjoseppi5904]

@@62dobie I've pinned every single one of my 1911s that I considered carrying. It was a terrible idea 100 years ago and it's still a terrible idea. I've personally seen guys on a normal range target shooting not activate a 1911's grip safety, never mind in a fight. Just because you do something stupid doesn't make it less stupid 🤣

[@dante69d]

@@maximusjoseppi5904 What does pinning involve?

[@tobyduvall74]

This is soo SEXY

[@colt10mmsecurity68]

Good video. Onto the gun… Springfield suxs. Glock 29 has less felt recoil. Springfield magazine feed lips are the worst in the industry. Hickok45 notes this in one of his videos. Drop the mag on the lips and they fail. They’re hysterical too fragile.

[@dsbond8048]

10:35 "Heavy robust rails in the back" Bullshit! The rails in the back are plastic. The gun will wear and the slide will loosen. Glocks, SIGs, S&Ws, CZs etc all have metal rails front and rear.

[@garygallant5390]

Loooong take up.

[@hamidlashkarzehi4871]

Weapons are not enough to be made in Pakistan and China, they can be used in any country, but Pakistan and China are disposable

[@christiangarcia8121]

M&P 10mm 4 inch model is better.

[@tristantimothy1004]

Christian, Have to thourally checked the reviews? Dosent sound like it. The M&P in 10mm have the highest failure rate. Great in 9mm but not so good in the 10s. Course thats using the hot bear loads. Which is why most folks are getting them, for BEAST backup guns. Just food for thought.....

[@jakeb8298]

Who would carry a 10 mm every day for protection against criminal people?

[@laloalonzo2461]

People that live in Chicago

[@jakeb8298]

@@laloalonzo2461 bs

[@tristantimothy1004]

Jake, a prosecutor would slay a person in court for using a 10mm for people self defense. Its a woods gun for bears & other lethal nasties. Demonazies are demonizing every gun owner every way they can. Even satanist scumbag lying Joe said the 9 will blow the lungs right out of a man. And the demonazi fools in a rigged jury beleive him.

[@ethanmac639]

10mm auto is for insecure, low self-esteem, small penis(metaphor and sometimes literal, especially when it effects their ego), overcompensating, obnoxious blowhards! The truly ideal cartridge caliber is the .40 s&w, but 180gr was always too heavy, great for 10mm auto though, between 135gr minimum and 165gr maximum parameters with 155gr/150gr bullet weight is best in my opinion!

[@americanazheck]

I have a g40 for hunting and want a carry gun chambered in the same, but I don't like any of the short grips. The g20 is just like the g40, but shorter..Oh well guess it ain't for me

[@jcoats150]

Appreciated.🏌🏿