Easy To Follow | TARVA Bed Frame IKEA Tutorial

In this tutorial, I'll be showing you step by step on how to assemble the Tarva bed frame from IKEA. This IKEA bed frame is pretty easy to build but if you need some help or you're struggling, this video will guide you along with the instructions.
Like and subscribe if you found this IKEA tutorial helpful! Thanks for your support.

[@perchtracker9431]

This is the clearest assembly video I have seen so far. W hat I liked was OFR showed the full assembly and did not skip any steps. Great suggestions during video to make things easier. Thanks OFR!!

[@evawilhelm5113]

I am going to order this bed now, having seen this. Great detailed way explaining this, thank you!

[@frankjrlara3117]

I can’t thank you enough for this video. You saved my life. I just about threw the entire thing out the window.

[@ameliablandin7078]

this video was so helpful thank you so much, took the nice and slowly and showed what to actually do

[@isabelleamir9173]

Thank you for the close up when connecting pieces. It helped me a lot !!

[@danielfrolick8415]

Thanks so much for making this! Very clear and straight forward. I never do any type of furniture assembling but I managed to get this done.

[@watcher1560]

GREAT ! THANK YOU ! Easy enough to follow and helped me get it all together in just a few hours.

[@azerkdd]

Neither ikea nor this video refers to you should be careful about L and R letters. And they are inversed.

[@pantoad]

Yeah, this caused me to completely disassemble the work I'd done and start over - unnecessarily. Grrr.

[@tal2290]

I actually called the customer service. They didn’t know what I wanted from them 🤣

[@LC_Boston]

Thanks so much for posting that! I had gotten most of the way fine on my own (to about 20:25 in your video), but then the pieces I had left didn't match with the instructions that I found on the Ikea website (there were no instructions in my box). Thankfully, the pieces I had left were indeed the ones that you showed in your video, so I now know how to finish the assembly.

[@KathleenKaiser-h2n]

THANK YOU! Your video is perfect and exactly what I need to put my bed back together after a move! The instructions on Ikea's product page shows a different center beam and supports on the bottom. I tried to request old instructions and was told to go to the store - hours away. I've had this bed over 10 years, it should be this hard to get an old set of instructions with the original support design.

[@EnriqueNotFunny]

His smile is everything ❤

[@Travel4Living]

Suggestion: Get rid of that claw hammer and purchase a rubber mallet. More precise, and you won't miss the dowels not even once. No damage to any part of the assembly with large rubber work end.

[@FatLava]

Claw hammer is still recommended for those metal tubes, because they tore up my rubber mallet

[@liliancancino2988]

the best step by step video thank you so much for this!!!!!!

[@Hannah-ih7uu]

Dear Sir, I owe you everything, your soft hands have shown me the way. we would like to sincerely thank you for the help provided by this tremendous video. Love always, forever yours, H.P.A.N. Until next time, may you have a blessed life. you're SICK !

[@kitzandkabootles]

thank you so very much!!!! we got a 2nd hand bed with no instructions. I am ready to sleep now!!!!

Thank you so much! Really help me a lot!

[@incensive5020]

Thank you for this! My full frame came with the instructions for the twin instead so this was a really big help! Update: Ran into an issue screwing in the crossbeams, my screws are absolutely not going in at all and I can't seem to figure out how you got them.

[@ΑΓΓΕΛΟΣΤΣΙΝΤΩΝΗΣ-ν1τ]

Hey..Is the bed solid??

[@shaunie23]

Thank you VERY MUCH for this! It helped tremendously 🙌🏾

[@maodonimega]

Excellent..thank you!

[@bobbybombo]

Thanks for this video. Very helpful.

[@anthonystrocks247]

HUGE help! THANK YOU!!!

[@jacksonburvit2150]

Super helpful! Thanks

[@exocet8834]

Thanks mate! Appreciate it.

[@mbs-j5t]

that was really useful. thank you

[@westleywest7259]

Thank you… Yes it did help!

[@dayangchillay]

Thank you! Just finish ours!

[@Robbielazar]

Thank you!

[@OnyaMarx-ve1xe]

Thank you !!!!!!!

[@sylvierancourt5262]

Merci de votre aide 🎉!!!

[@gurneetsingh336]

Anyone plz let me know about the bed base at 24.18, do we have to buy them separately. Because I ordered the same bed, assembled but didn't have bed bases. Thanks in advance

[@tonyhill6236]

谢谢 很棒的视频 🙏

[@sergeyyurchenko7014]

Thx dude

[@A320FirstOfficer]

Dude you don't need to keep that flathead to the barrel nuts while tightening the bolts. Once the bolts are threaded in, you are good to go, lose the flathead. The groove is only there to adjust the barrel nut if you push it in all wonky and cannot find the hole with the bolt, then you can realign and leave it alone.

[@BDD-s2c]

The metal cylinders do not fit the holes - not even close. Has anyone else experienced this?

[@gianmarianotaristefano4370]

You probably put them on the wrong side, exchanging the left bar with the right bar

[@phillustrations]

How long did it take you?

[@originalfurniturereviews2964]

It should take you around 1.5 to 2 hours to complete. A drill with a Phillips bit can help speed up the assembly process

[@karan-nr3ek]

11:00

[@ankit07271]

Please upload gursken bed frame

[@wojooda4023]

It’s 200*140?

[@greynightingale]

My metal pegs don't fit the holes I have 😭

[@BDD-s2c]

Same. What did you do?

[@greynightingale]

@@BDD-s2c you could take a drill bit to it, but I eventually had to find spare parts

[@CHARLESSBRONSON]

OHHHHHH FOR THE LOVE OF THE SLABS 😅..