Easy way to reset ECU for Infiniti 2006 and up g35, g37, m35, m45, m37, m56,

without erasing other vehicle memory like power window auto up/down, sunroof auto open/close Must be done exactly like in video or will not work. After it’s done you will notice a significant difference in how the car drives.

[@Bobby_Stone]

Perfect, thank you... this is so much better than the forums.

[@mbatista4794]

Sometimes it may take more than one try, glad it worked for you.

[@Bobby_Stone]

@mbatista4794 thanks.....yeah it only took 1. I watched the video for the steps then followed along and it was perfect. 2012 G37x

[@kevinarce6567]

it works thanks man

[@mbatista4794]

Glad it worked, Please share your year and model

[@kevinarce6567]

@@mbatista4794 Sorry for the delay I have a 2011 infiniti G37 X Sedan

[@kelvinbarber1765]

It works

[@justhere4721]

How do you know?

[@RTIIadventures]

I just tried

[@RTIIadventures]

We’ll find out in the morning I’m not losing my parking

[@GetlowKenny]

What are the actual steps so I can try on my infinity

[@mbatista4794]

1. Confirm that accelerator pedal is fully released, turn ignition switch “ON” (NOT start) and wait 3 seconds. 2. Repeat the following steps (2a and 2b) procedures quickly five times within 5 seconds. 2a. Fully depress the accelerator pedal (HARD). 2b. Fully release the accelerator pedal. 3. Wait 7 seconds, fully depress the accelerator pedal and keep it for approx. 10 seconds until the CEL starts blinking. 4. Fully release the accelerator pedal (while the CEL is still blinking) 5. Wait about 10 seconds. 6. Fully depress the accelerator pedal and keep it for more than 10 seconds. 7. Fully release the accelerator pedal (The CEL light will continue to blink) 8. Turn ignition switch to “OFF” position and now you can start the car. The CEL light should be gone. If the CEL light continues to remain ON, repeat the above steps. Remember, timing is EXTREMELY critical to resetting the ECU. You may even need someone's help to do this correctly