Infiniti G37 Throttle Body Cleaning Service and Re-learn Procedure

[@NoahT_SB]

You are a lifesaver!! After a shop cleaned my throttle bodies, doing this fixed my g's sluggishness. Thank you so much 🙏🏻

[@LowTechGarage]

You’re welcome! I’m glad this was helpful!

[@EthanBroser.]

Great video, it was very informative. Thank you!

[@LowTechGarage]

Glad it was helpful!

[@nabeelahmad978]

Did you do spark plugs too? My g37 still lags even after spark plugs do you recommend throttle cleaning at 95k miles

[@LowTechGarage]

On the IPL the spark plug service interval was around 60k miles. Our car is almost due for another set. I think it would be wise to clean the throttle bodies at 100k interval. Ours has 115k and they were ready for a clean.

[@Membreins]

At 5:53, are you sure you didn't have to push the start button twice to finally get it into ignition 2 mode on that first attempt? Saw there was a proper delay there in the vid and your finger hitting the start button a second time under 5 seconds before it went into ignition 2 and you actually counted the first 5 seconds. Just wanted to clarify for everyone who needs to do this without a scanner. Thanks for doing this video btw.

[@LowTechGarage]

It’s been a while since I made this video. But I do know the process varies between auto and manual. Ours is an auto. We have had this G nearly 10 years and it’s so reliable compared to all the other cars I chose to enjoy. 🤣

[@kskcjsnnc9794]

yea man i was comfused to but yea u do have to press 2 times and also make sure your car is cold for it to work

[@Gabriel83580]

Nice. So you never actually remove the throttle bodie plat out of the bodie to clea. It better?

[@LowTechGarage]

No need, you can sufficiently clean it without removing. Done 20k miles since this service and no issues and idle is perfect.

[@nakobilly]

Thanks for there helpful video!

[@LowTechGarage]

Glad it was helpful!

[@ryanross7339]

So I have a g37 coupe with 130k and it just started to jolt when idling and the rpm goes up slightly. Spark plugs are new so do u think this could help or fix the problem

[@LowTechGarage]

I would definitely do this service if you haven’t before. Our G was at a similar mileage when it started giving us trouble. This service resolved it. Be sure to do the recalibration process at the end of

[@YurAhWerido]

I seem to be to doing it but my car don’t hold it’s rpm an shut off am I doing something wrong?

[@LowTechGarage]

Is your car an auto or a manual? I recall the relearn process is slightly different depending on which trans you have.

[@ncblu3216]

I did this and installed my new kn air intake now my cat won't start is there anything special to do with throttle body when reinstalling

[@LowTechGarage]

As long as you didn’t unplug them you should be ok. Just be sure to follow the relearn procedure in the end of the video

[@ncblu3216]

@@LowTechGarage I unplugged them lol so have I ruined them

[@stickman385]

Does this work on the 2014 q50 with the 3.7 engine?

[@LowTechGarage]

Yes this should work the same.

[@stickman385]

Thank you!@@LowTechGarage , also would you recommend disconnecting the battery before doing this?

[@ahmedz1349]

No need disconnect battery before cleaning?!

[@LowTechGarage]

@@ahmedz1349 I like to play it safe 😬

[@nizamkhoo]

thanks sir

[@LowTechGarage]

Most welcome

[@nizamkhoo]

@@LowTechGarage hello sir i have some issue on my infiniti g37 engine light come out and get code p1090 vvel gctr mot-b1 what cause is