Easycoat Review - Heat Shrink Covering Film for Model Aircraft - Balsa RC Planes

www.oracover.de/film

[@markford7682]

Mark I think you’ve saved us a lot of headaches,taken on board , appreciated 👍

[@MarkRobinson555]

Glad to help, appreciate the comment

[@richardhayes2514]

Excellent review which pulls no puches. Well done!

[@MarkRobinson555]

Glad you enjoyed! Thank you for the comment

[@stevetruckle6655]

Thanks for the review Mark, much appreciated.

[@MarkRobinson555]

Your welcome, appreciate the comment 😀

[@brianchandler8855]

Thanks Mark, it is nice to know that it was not my lack of experience or skill that made my first attempt at covering such a disaster. Keep up the good work.

[@MarkRobinson555]

Oh no! That was not a good way to start, I do feel for you. Don't let the experience put you off, it can only get better. Just stick with it, when you get some good covering it will be so much better and easier. Thanks for the messages, good luck with the next one 😀

[@homienat3374]

@@MarkRobinson555 ive worked with easycoat today with no hassle ,just needs less heat an the big p ,,patience

[@NormanLedoyen]

I like the info Mark. Well done again.

[@MarkRobinson555]

Thanks Norm, appreciated

[@deanedeane4318]

Thankyou for such a polite warning !!! 😉😎

[@MarkRobinson555]

Hahahaha, you are welcome

[@homienat3374]

Well i just used 2 rolls purchased last week ,white on blue with no bleeds at all ,and the were 2nds works just fine for me

[@MarkRobinson555]

Pleased you got it to work for you 😀

[@waetos]

They should be taking this off the market

[@JonoRob]

totally agree with your findings

[@terryblackman6217]

A good honest review. It's such a shame after all that hard work building. (And I know from watching your videos your woodworking is superb). The three products I loved were, solarfilm, solartex and my favourite litespan. Stay warm. Terry

[@MarkRobinson555]

Morning Terry, yes there have been some great covering we have lost, Solatex I used recently, some old stock, and it was so nice to use. I really like Oracover, and I will do a review soon. Yes, thanks you stay warm as well in these difficult times. I am off flying this morning so that should blow the cobwebs out, be interesting to see how my diesel plane likes -2 deg C!

[@terryblackman6217]

@@MarkRobinson555 I have just been outside to check my pond is OK and it's -6 on my garden thermometer. Have a good one.

[@MarkRobinson555]

Wow, thats cold, I haven't dared venture out yet, but I will soon to put some food out for the birds as soon as it starts to get light!

[@helischorsch9786]

Thanks for sharing Mark👍…who has no edges or curved parts to cover😏…shame that it is still available as a covering material. Used Oracover and Solartex in the past, unfortunately never tried Monocote, but should be great and last forever! Cheers from Munich, Sven🍺

[@MarkRobinson555]

Thanks for the comment, Oracover and Solatex are lovely to uses, like you I have never tried Monocote

[@Johnny-tt8zc]

Easycote is a hard no for me. Thank you for saving me a headache.

[@MarkRobinson555]

Pleased the video was useful

[@tdogrc]

Thanks for the review Mark. Have you tried cellulose thinners to get the glue off? I been using Macgreggor or Ripmax film recently and that seems ok. 👍🏻

[@MarkRobinson555]

Appreciate the comment, thanks for the advice, not tried the Macgreggor or Ripmax yet

[@DanielMigneault]

Good to know! thanks!

[@MarkRobinson555]

Happy to help!

[@davidhames319]

I use hanger nine ultra coat and never had an issue

[@oliverbowen17]

I use ripmax aero film really great stuff in my experience 😄

[@MarkRobinson555]

Thanks for sharing

[@cratecruncher6687]

I recall a few years ago many of the Chinese ARFs were covered in that or similar stuff. It would already be peeling off when you opened the box. But they were so cheap compared to building one people would strip and recover them with Monokote.

[@mikeykeyes]

Hi Mark this question is a bit out of context for it relates to a Bosch pbd40 drill press review you did 12 months ago. I bought my son a Chinese 420W belt drill press for running Forstner bits as he is starting to make small wooden jars but needs to hollow out - this machine can't handle 50mm and above sizes of the Forstner bits. Would the Bosch one handle it you reckon? I have it saved for $429AUD and would order if it can do the job for him (13yo) Thanks mate. BTW glad I ran across your review very clear and simple and also the way you talk reminds me a lot of a friend of mine David Green who passed a few years ago - a great handyman being an ex RAF Engineer. Brought back memories.

[@MarkRobinson555]

HI thanks for the comment and pleased you like the review. I think that a 50mm Forstner bit may be a little to big for this drill to handel

[@mikeykeyes]

@@MarkRobinson555 Thanks mate. They just reduced the price even more but naturally no need to buy - ended up with a 80mm and a 100mm bit which I need to resell then :)

[@MrMadtractor]

have you used the dancing wing covering? it’s about 15$ cnd for a 2m roll was wondering it similar or the same stuff it comes with no hard card roll in the center so maybe that’s a cost saving

[@MarkRobinson555]

Sorry I am not familiar with the Dancing Wing covering.

[@MrMadtractor]

@@MarkRobinson555 okay thanks been looking to see if anyone has done anything with it but might be something to look in to

[@MrShutlecock]

I built a cloud clipper and used easycoat and ended up covering the tail 5 times as i couldnt get a good finish and like you i wont be using easycoat again

[@homienat3374]

Hi mate, i just finished my cloud clipper, have dark blue and white ,so it wont be a great out come using lay over

[@jamesledbetter125]

will goof off work? or will it melt the covering?

[@MarkRobinson555]

Thanks for the comment, it would certainly be interesting to try

[@rickikilvi5406]

Good review. Looks like EasyCoat is worse than the Solarfilm I used aeons ago. Pigmented adhesive is nasty.

[@MarkRobinson555]

Thank you

[@homienat3374]

Had sock on the iron

[@Tom-wl9sx]

Thanks for the very informative video 👌 will avoid it 👍

[@MarkRobinson555]

Pleased you enjoyed the video, thanks for the comment

[@johnmetcalfe9548]

Agreed, awful stuff. cellulose thinners will get rid of the glue, ( the colour will be engrained into the wood though,) it removes enough to enable you to recover with something better.

[@MarkRobinson555]

Hi John, thanks for the advice, its appreciated

[@Hattinchannel]

Is this actually Mylar? BoPET

[@WayneCook306]

The clear is got to be peeled off and then that side goes down against the balsa it does not sit on top it is a backing only you need to discard the clear.!!

[@MarkRobinson555]

Yes, I know that, but the actual film is still cheaply made, comprising a clear film and coloured glue, and the clear film peals off leaving just the glue.

[@WayneCook306]

@@MarkRobinson555 Yes ok thank you.

[@MarkCroucherRC4fun]

Don't hold back Mark 😂

[@MarkRobinson555]

Hahahaha

[@buckwheat2210]

Why can you use a heat gun to shrink it on?

[@MarkRobinson555]

Not sure what the question is? You can use a heat gun because it is designed to shrink when heated. Is that what you were asking?

[@stevejones9044]

Yeah that covering is garbage and was a frustrating experience the first and last time I used it. I stick to monokote when I can get it and Ultracote.

[@jimmartin8853]

A little swearing and bad mouthing would have been appropriate. Thanks for the info. I'm here because I was thinking about putting this on one of my models. Between you and the commenters I've changed my mind. It's going to be tissue for me. Thanks all. 😛

[@MarkRobinson555]

hahaha, I can assure you there was planty of bad language off camera! Pleased you found the video helpful

[@alanreynolds2125]

in the bin for me😡

[@neilparker3192]

Carburettor cleaner removes the colour instantly. It's still bloody rubbish though compared to other films.

[@MarkRobinson555]

Thanks very much 😀

[@waetos]

That's not good. I won't be buying this stuff

[@francisbrittain6396]

Easycote is the worst covering ever . It's not of saleable Quality and should be withdrawn from the market .

[@Glenfilthie1]

What about tissue covering Mark? Have you ever tried it?

[@MarkRobinson555]

Yes I have in the past but not for a while. I do have a project comming up where I may use tissue, but undecided yet