EASY Chevy Equinox VVT CLEANING & REPLACEMENTS!

✅ Repair for common codes P-0010 through P0029. Variable valve timing solenoid cleaning or replacements on Chevy's 2.4L ecotec engine for check engine codes. I also recommend flushing and changing the engine oil with these codes. Sludge and debris in the engine oil is typically the cause of P0010-P0029 and P0170-P0175 codes. Engine stalling, idling, and hesitation issues often appear with these codes also. This is an easy fix!
*if I have helped you out-please consider tipping me with the "Thanks" button 😃
Video✅
Exhaust solenoid: amzn.to/37097Ix
Intake solenoid: amzn.to/36RcH7o
Both solenoids (cheap!): amzn.to/35QjKfw
Cheap scan tool: amzn.to/37ZTIb5
Favorite tools ✅
Quiet Bands: amzn.to/2Lr3CKo
Headlamp: amzn.to/2LskvEG
Hub shocker: amzn.to/2Q2b0jO
Power Probe: amzn.to/2NTyaGg
Hydraulic flare kit: amzn.to/2N8Ijzg
Antivibration hammer: amzn.to/2N8W8ho
Pry bars: amzn.to/307BL6b
knuckle savers: amzn.to/2LnkfGS
Spark plug sockets: amzn.to/2N7dnzB
Hose tool: amzn.to/2LoD649
Chassis Ears: amzn.to/2Ltl1SD
Soap: amzn.to/332qyWd
Pewdiepie Chair: amzn.to/2SfIElm
My dogs favorite toy: amzn.to/36irgRl
Ultimate wheel bearing removal tool ✅
Hub Shockers: • HUB SHOCKER Hub Buster...
Grab some swag ✅
EF-Merch: teespring.com/stores/easy-fix...
subreddit✅
/ autoeasyfix
Thanks for being here. Your time is valuable.
~Shaun 🔧
00:00 Code symptoms parts
01:04 Removal
06:12 Installation
09:16 Additional Oil concerns
Easy Fix is a participant in the Amazon Services LLC Associates Program, a program designed to provide a means to earn advertising fees by linking to amazon.com
If you purchase from affiliate links I will get a small commission with no extra cost to you. This helps me to make more videos. Thank you!

[@EasyFixShaun]

*_New sway bar link video_* kzbin.info/www/bejne/ZoSbe3WblM-hbMk

[@cuznboodro32]

Bruuuuuh...... you just saved me a GRIP!! THANK YOOOOOOOU!!!😅 Firestone was trying 2 bust my head 2 the white meat! $118 for the diagnostic test alone. I went 2 autozone and they did it for free and now I'm smooth sailing!😁

[@EasyFixShaun]

You're welcome!! Glad it worked well for you 😀😀

[@mrhiface907]

Huge thank you! So much cheaper than getting it diagnosed and fixed at a mechanic and so easy. Thanks for saving us a bunch of money and time.

[@EasyFixShaun]

Glad it helped! Thank you so very much. Makes a huge difference 😀😀

[@leahsancartier2932]

PERFECT VIDEO!!!! Lighting was PERFECT in order to watch video. Directions were so thorough as well as showing part numbers, etc. THANK YOU

[@EasyFixShaun]

Excellent! Thank you. Glad to help 😀🔧

[@dennismarty-uz1gv]

just wanted to say a great big "thank you" for this video! it was a wonderful feeling to actually watch an auto repair video that was EXACTLY like my vehicle. I do not like working on vehicles because it is never as "easy" as the parts store employees or many of the videos online say! once again thank you!!!

[@EasyFixShaun]

No problem glad to help 😃😃

[@bertbennett2719]

I advise folks to do this repair yourself if you can. It's a simple repair. Make sure you get quality parts. I had to have it done at a repair shop due to my health and it cost $700 for parts and labor. No way in Hell is that a reasonable price. Anyone with basic skills and tools can do this in under an hour. Watch several youTube videos and you'll know all you need to do this easily and safely.

[@EasyFixShaun]

I am glad it worked for you 😃😃😃

[@martye3187]

You are very very correct!

[@knowyuhgrow420]

You don’t even need skill to do it

[@kristinakoltyk8521]

Thank you for making videos like this. I'm a single mother, and my 2015 Chevy Equinox check engine light came on with this code, and it's been stalling out on me. I bought the parts from O'Reilly, and they actually have the intake and exhaust labeled on each box, so that should help. I've never worked on a car of any sorts, but I was going to try to do this. I'm just very scared I'm going to mess it up.

[@l.a.xl.a.x1810]

Damn they fucked u... they want 340 for me when I called today

[@sblagg527]

Thank you for showing how those connectors come off the solenoids! I had the exact same problem as you in the video- connectors would not pull off until I removed the locking tabs completely.

[@EasyFixShaun]

You're welcome! Thanks for sharing 😃

[@richardsprague6841]

My 15 Equinox showed P0011 code, changed the intake solenoid and manually cleared code. Engine started easy and sounded smooth and I drove it around the block with no issues. I have 5k on the oil but its synthetic and looks clean and is full. The next longer drive will see if the problem solved. Thank you for a great video.

[@EasyFixShaun]

Excellent. Glad to help. I hope it works well for you 😀🔧

[@nombredeusuario622]

How did you clear the code? I'm struggling to find any good videos or website explaining how to do so for a 2013 Equinox. Thanks!

[@richardsprague6841]

I have an engine analyzer. They don’t cost that much.

[@jandjaiwandb6172]

This was super helpful, followed exactly and this fixed my issue. Thank you very much.

[@EasyFixShaun]

Outstanding! Im glad it worked out for you.

[@MarietyShow]

Saving this video right after I bought this car. Heard this was a common issue, so now I will know for IF the time comes. This is probably my biggest fear with the Equinox. Thanks so much for making this vid!

[@EasyFixShaun]

Fingers crossed! Ya I know what you mean. This motor characteristically sludges up, so it's harder to stop the sludge compared to most motors. The best thing you can do to try slowing it down, use synthetic engine oil and change at 3k miles 😃🔧

[@stevencupp8932]

Smokin hot vid, thank you for being out there.... 2013 Equinox is running good again..

[@EasyFixShaun]

Thanks a lot!! Glad you got it running 🤓🔧

[@bereketgebregzabiher1446]

Excellent! I love the way you explain. Thank you

[@EasyFixShaun]

You're very welcome! Thanks a lot 😀

[@Tomsfoolery.]

Good job! Thanks for the shout out too!

[@EasyFixShaun]

Thanks for all the help man!!

[@edbrown3047]

Thank you..Going to do this on my wife's equinox today..your video helps me a ton

[@EasyFixShaun]

No problem! Glad to help! Good luck 😀🔧

[@jvctuber]

Just adding to the thanks for this amazing video. An easy job when looking back, but such a great resource. Thanks!

[@EasyFixShaun]

Very welcome! Thank you for taking the time to comment. Helps a ton 😀

[@shawandaneal4007]

Thanks for the great breakdown 😁

[@EasyFixShaun]

Any time! Glad to help 😃🔧

[@Bull53]

Thank Sir my Equinox threw a engine code. It was the same thing. Bought my Equinox new in 2016. I've always changed my oil with Mobile1 5w30 I will replace these two parts myself. Thanks again!

[@EasyFixShaun]

I love mobile one also! Can't go wrong there. Good luck 🤞

[@keithp115]

The exhaust solenoid will usually have a black top, vs. a gray top for the intake. Nice job!

[@EasyFixShaun]

Good eye! Thank you! 😀🔧🔧

[@abisismael1343]

Nice lesson guys ! Thanks a lot

[@EasyFixShaun]

You are welcome!

[@bucsorange]

Thanks so much -- great video and instructions -- worked like a charm

[@EasyFixShaun]

Excellent! I’m glad it helped you 😃

[@esame3653]

Thank you man. Followed your steps and problem fixed.

[@EasyFixShaun]

Awsome! Glad to help 😃😃

[@brucemacallan6831]

Thanks for this! I had these codes show up, and my Captiva is stalling at idle, - I've just bought a pair of these online, and now know how to replace - Thanks again.

[@EasyFixShaun]

Glad I could help! Good luck with your Captiva. If they are dirty make sure and flush the engine oil and then change the engine oil if you can to try to keep the new ones clean as long as possible. I hope that does the trick. 😃🔧🔧

[@brucemacallan6831]

@@EasyFixShaun Many thanks!

[@EasyFixShaun]

No problem! Happy new year!!😃

[@jaydowdy27]

Perfect explanation! Well done 👏

[@EasyFixShaun]

Thanks you! Glad to help out😀🔧

[@arpatriot616]

This was one of the easiest repairs I have ever done, and this video made it that much easier. Got rid of the P0010 code\CEL and stuttering immediately. Odd thing was, the screen was completely clean, but there must have been something inside the actuator. Brake cleaner fixed that.

[@EasyFixShaun]

Outstanding! I’m glad it went well for you 😀

[@flyGUySM0kE]

Did you have to take the actuator back out? If not, then how did the brake cleaner fox it?

[@EasyFixShaun]

Wether you clean or replace the valves you need to remove 😀🔧🔧

[@edhackett6058]

About six months ago, I got the Engine light, pulled up an intake sensor too advanced code, replaced the intake solenoid, fixed! Now, I have an exhaust P0014 code, cleaned solenoid, no good. Replaced ex solenoid, still no good! No engine light, but the P0014 code remains; now what?

[@MCMinerHQ]

Try replacing the oxygen sensor(s)

[@renaissanceman8564]

Great video , filming, editing, and tutorial. For me I hate to see a dirty engine , PCV and air filter. So, when you top off a cover take a good look for rat poop. If you see some make sure to inspect the wires everywhere because this can trigger a code . Those pesky varmints like a warm place to sleep 😊

[@EasyFixShaun]

😂 so true 😀😀

[@josephmaslowski4051]

because of a screw up on my part, my connector needed to be replaced (exhaust) . I've been searching for hours try to find the color coding on the connector. Thanks to your video, (at 2:21) a clear view helped me out! I figured the Chevrolet $65 connector would have the same colors as my old one LOL. You guys have no idea of how many images, videos and even a subscription to Alldata got me nowhere. I've been kicking myself for not being mindful of a simple two wire plug. (note to self) take more photos and don't take $h%T for granted. peace

[@EasyFixShaun]

Oh man. I'm sorry that happened. That is a real bummer. Glad to help 😀😀

[@WilliamusTrades]

beauty. thanks for posting this!!

[@EasyFixShaun]

No problem! Glad to help 😀🔧

[@brianmccabe881]

Very well presented.

[@EasyFixShaun]

Thanks! I’m glad you liked it 😀

[@doubleitp]

Just a tip, GM recommends that you take your finger and lightly coat the O-ring with engine oil before installing the new solenoid.

[@EasyFixShaun]

💯 Great tip! 😃🔧

[@JustinSmith-pf5ws]

Thanks the the video. It was very helpful this morning.

[@EasyFixShaun]

Awsome! No problem 😃🔧

[@spelunkerd]

Well explained. On older cars with concern about sludging I've used seafoam added to oil, with a couple of quick hot oil changes to try and loosen sidewall deposits. It is not easy to get crap out when this kind of thing starts to happen.

[@EasyFixShaun]

Hot oil changes are key to trying to get all the old oil out. Flushing is a really good idea if the intervals were too long or the oil was consistently run low. The oil will sludge up quick under normal conditions on the these. Severe conditions lead to major problems. 😀

[@johns4407]

@@EasyFixShaun when you say flushing, is it an oil change and then drop the oil and change again say in couple hours of driving or buying an engine oil flush product to add in and then run engine for a few minutes and drop the oil? I never had luck with engine oil flush products. Seems to be an engine will be failing not long after.

[@EasyFixShaun]

There are many ways you can do it. A simple change X2 is helpful at the least. I usually add a quart or two of atf fluid depending on the situation. It has a very high detergent level in it. Then drain and fill again. Then do it once more and refill will engine oil and new filter. It is no guarantee of getting stuff out of an engine. But it sure makes me feel better 😀🔧🔧

[@kristinakoltyk8521]

My ex- boyfriend bought me a can of seafoam. I just found it unused in my backseat. I think he told me to add it to my gas tank. Is that correct or should I put it in the oil?

[@waltersweet4595]

@@kristinakoltyk8521 Gas tank or pour slowly into brake booster vacuum hose

[@RevenueTV]

Thanks for your video super helpful and a blessing!

[@EasyFixShaun]

No problem 😃

[@stevebecwar9286]

Thanks, solved my issue

[@EasyFixShaun]

No Problem 😀

[@foresterlady448]

Great video!

[@EasyFixShaun]

Thank you!

[@VersatilePessimist]

Thank you sooo much!

[@EasyFixShaun]

You're welcome! 😀😀

[@muhammadsharifii5865]

Great video! I just used it to replace mine. Awesome!!

[@EasyFixShaun]

Glad it helped! 😃

[@masonmortar357]

exellent video n narration .🏁

[@EasyFixShaun]

Glad to help out! 😀🔧

[@thomasnicholas8480]

Very concise video. Not sure why my intake solenoid failed since the engine oil and filter are changed regularly. Mobil 1 5-30 is the only oil used since the first oil change from the factory.

[@EasyFixShaun]

What interval do you change the oil?

[@thomasnicholas8480]

@@EasyFixShaun About 4K

[@EasyFixShaun]

Is the oil full at all times? Low oil can accelerate sludging very quickly because the oil cools the engine and when there is less of it, it turns to sludge from overheating. These engines characteristically sludge up more than typical. Low oil level and/or extended oil change intervals will increase that. I like your 4k interval on synthetic. I shoot for 3k on synthetic myself, but 4k happens on occasion and i believe is acceptable, as long as oil level is full at all times. Anything over 4k/synthetic/full is asking for trouble in my opinion. Oil picks up ash from burning fossil fuels and gasoline burns as ashy as the day it was introduced 😃🔧

[@TangleWireEnjoyer]

good video, worked for a 2014 captiva sport

[@EasyFixShaun]

Glad it helped! Keep your oil clean and full at all times 😃🔧🔧

[@harryspence4562]

great vid....it sure helped...

[@EasyFixShaun]

Glad to help😀🔧

[@gustavosanchez6663]

Thank you very much sir. It helps a lot

[@EasyFixShaun]

You are most welcome😀😀

[@nicholasnoah6529]

cover your intake as soon as you take off the box. and replace your oil cap too

[@EasyFixShaun]

Not a bad tip at all. I have always been careful to not get debris in those areas 😀

[@tex33nf1]

Thanks!!!

[@EasyFixShaun]

No problem!

[@tlalocaztecgod]

I got both solenoids for $18 at Amazon's. Both matched even gray and black. When changing the oil filter don't skip to replace O ring provided with the new oil filter cartridge,. The O ring sits around the filter cover.

[@EasyFixShaun]

Thanks for the comment! That is a great call on the o-ring! Wow they are getting cheaper and cheaper on amazon. That is nuts 😃🔧🔧

[@kidlargo1]

@@EasyFixShaun would you really trust $18.00 a pair solenoids over OEM? I think that's a bridge too far for me..

[@EasyFixShaun]

No i would not. Amazon options are worth trying only because they are easy to install and shipping is quick. Oem is always the best option 😀🔧

[@kidlargo1]

@@EasyFixShaun Update: Removed mine and cleaned them really good. They didn't look too bad on the outside. I hosed them down with brake cleaner then did some function checks and tested the resistance also. Everything checked out just fine so I reinstalled them. Good as new. Of course now I have a pair of solenoids on the shelf for future use. Your video was invaluable!! Save me hundreds probably in time, cash, and aggravation. Even with $100 buck in new parts lol. A++

[@EasyFixShaun]

Excellent! I am glad you got it figured out😀🔧

[@JorgeTorres-mb7nk]

Thanks for the video. I clicked on the amazon link for both, added my car info for comparability and apparently it’s not the right kind. I have a ‘17 equinox LS.

[@EasyFixShaun]

Glad the video helped. If the link doesn't work on the vehicle confirmation, you can research for you specific vehicle once in there and that should take you to the one you need. Some have slightly different solenoid parts. I listed the link for the vehicle that I was working on, but I was hoping that link would get you going in the right direction. Let me know if you still can't find the part you need 😃🔧

[@JorgeTorres-mb7nk]

I just added another comment. Regarding the amazon search, your advice helped. Received them today and replaced the old ones. As I mentioned in today’s comment, it runs better but the car shakes when idling/at red light. This is a first.

[@phillipkinney7896]

@@JorgeTorres-mb7nk try cleaning the throttle body. Very easy to remove and clean thoroughly

[@johngrassphotography]

I was going to send my wife’s car in for this fix. Thank you for the instruction. I am grateful for your help.

[@EasyFixShaun]

Excellent! They are not bad to repair at all. A little messy maybe. 😀🔧🔧

[@gasperajdnik5627]

Good Job mate 👍:-)

[@EasyFixShaun]

Thank you!!

[@noelcreary7210]

VERY good video 👍👍

[@EasyFixShaun]

Thank you! Cheers!🍻

[@dennisgarber]

Impressive explanation, as you did it. Very thorough.

[@EasyFixShaun]

Thank you! Glad it helped 😀

[@KidFriendlyGaming]

The hardest part is removing the wire connectors, but once you know to pull the gray part off first, it's easy. I had replaced bith with Amazon parts, but I'm not sure about the quality so I just replaced again with acdelco. Will see if any change

[@EasyFixShaun]

Excellent! Good luck. The ac deco are the best no doubt. 😃🔧

[@edhackett6058]

The Amazon web site states it’s a used part. So, I went to O’Reilly. $57 with Vet. Discount.

[@juliefour1023]

I just experienced this issue and have been researching the repair. Yours is the best, most detailed and clearly explained. Thank you.

[@EasyFixShaun]

Hey thanks a lot! hope it helps you out😀🔧

[@sirrock9186]

thanks mate

[@EasyFixShaun]

Glad it helped 😃

[@ericpetteway3841]

Fixed my son’s equinox the same way

[@EasyFixShaun]

cool! 😃

[@johnathanwoods1223]

Intake: Stewie Griffin head Exhaust: smiley face. Just finished changing mine.

[@EasyFixShaun]

Nice work! 😂🔧

[@russellstephan6844]

Pep Boys in Las Vegas quoted my mother $500 in labor alone to replace these solenoids. Needless to say, when I talked with the service writer, I tore her a new you-know-what. I then drove to Las Vegas from Columbus, Ohio to visit a little and bang this job out myself. How do these people sleep at night?

[@EasyFixShaun]

Nice work! Ya that’s pricey. At least you could put the money to a nice visit and repair. Win win!

[@terencekellymybestscooters2415]

Great vid but for some seating the seal can be a problem, after my son tried seating it by turning down the bolt it still did not seat and broke the bolt .I got a socket that sat on the outer shoulder and gently taped it in hope this helps thanks.

[@EasyFixShaun]

No problem. Glad the video helped. Using the bolt to seat can create a wedge effect and break things for sure. Sorry you had that problem. The best approach is to seat by hand. Once seated then install and tighten bolt. The orings can be difficult to seat sometimes. The tolerances are fairly tight to create a good seal once seated. I usually try to lubricate the oring and that usually helps make it easier to seat 😀🔧

[@drtpredatorcontrol6093]

Why did you put full synthetic in it? My mechanic just showed me a TSB that shows to put synthetic blend into it? We just did the oil change today and on the way home it stalled out. I had been using Pennzoil Full Synthetic until today and never had the problem.

[@EasyFixShaun]

Synthetic is better than conventional. If there is a TSB then go with that. On a side note, part of the problem with these solenoids is that sludge gets in the engine oil. Synthetic can help with that. Synthetic is superior in my opinion in every way and in every application. It is an easy substitute. I did not know about the TSB 😀🔧

[@Koolaid19691]

Do.ylu need to lube the o-rings on the new solenoids before reinstalling them?

[@EasyFixShaun]

I like to put some engine oil on them to aid in popping them back in and sealing them. They work with engine oil so it is the perfect lube. You could use petroleum jelly also 😃

[@tienduong3454]

My Chevrolet Equinox 2010 had an Engine light on, and when diagnosed, the codes are below: P0014 Exhaust Camshaft Position System Performance P0137 HO2S Circuit Low Voltage Sensor 2 The machanic told me If I don't fix, The car will consume more gas. My questions: 1)If I don't fix them, Will there be any damage to other parts of the car ? 2) How long can I drive before I can afford to fix them? 3) what are the costs to fix those two codes ? Thanks a bunch

[@EasyFixShaun]

Hard to say how long you can go. I would call the shop you paid to diagnose and ask what they think about that stuff to try to clarify. I hope that helps 😀

[@Bull53]

I replaced them both 53K im good for awhile

[@EasyFixShaun]

Excellent! Hopefully good forever 😃

[@kevinronichaud119]

Could p0133 be the same issue? Its the obly code that pops up. No echaust leak both 02 sensors chamged last week and the suv still stalls. I wanna make sure it could be these sensors you changed before i purchase and its not that. Thank you

[@EasyFixShaun]

Hard to say from my end. It sounds like an oxygen sensor circuit problem. Could be the sensor or the wiring or the computer most likely. It could be something worth trying to pull the sensors out and at least clean them. Maybe you get lucky! 😃

[@monkeybusiness3269]

Bro I have a chevy equinox 2017 LS Can I use the same solenoid that you used? Thank u

[@EasyFixShaun]

I believe they are the exact same. But, here is a kit link for your year, make, and model from amazon 😃🔧 amzn.to/3DLfOAP

[@gentrysorenson3397]

I was told by two repair places today that when I receive these codes the timing chain is bad and the engine will be destroyed unless the timing chain is replaced. They said the solenoids are usually never a problem.

[@EasyFixShaun]

They may be right. Hard to say. The solenoids are the easiest snd cheapest to replace parts vs timing chains. It is a weird problem and hard to pinpoint sometimes. Like a rough running engine, sometimes its not a horrible idea to try the cheapest repair and parts like spark plugs at first. Especially if they have many miles on them. Doesn't always work. But may be the first step if you can not diagnose with equipment. I hope that helps. 😀😀

[@robbieg2345]

First mistake is listening to a repair shop. They want more money from you.

[@EasyFixShaun]

That is their job. They get a bad rap though 😂

[@alisonandterry]

Great video. My parents have a 2015 Equinox with the Ecotec engine that has been exhibiting this stalling phenomenon. They have not had the check engine light come on and I used my basic scan tool to look for codes. There have not been any set or pending codes. The oil gets changed every spring and fall as they only drive about 2000 miles a year. Can you give any suggestions?

[@EasyFixShaun]

Ok. Well clean oil, full oil, and regular oil changes are cheap insurance. So that’s great. For the amount of work if takes I would pull them out and check and clean. When dirty they can cause stalling with no light on. They probably aren’t quite bad enough to set a code yet.

[@juanc.9735]

“Exhibiting a stalling phenomenon” Mmm🤔, I gotta say that it’s the first time I’ve heard that as a description for a condition. Not hating, but rather quite the opposite with such eloquent description🙂

[@EasyFixShaun]

Maybe Terry lives in the United Kingdom. Sounds very proper english ish. 😀🔧

[@E85_STI]

I just installed a catch can on the equinox and my intake box had a bunch of brown oil and moisture. Now for my car I run a dual catch can setup as I have a big turbo and it will suck all that into the cans. I’ve had to replace this sensor once and I change the oil in schedule with full synthetic and I never reuse the filter.

[@EasyFixShaun]

Nice work! Oil is soooo important. Changing it regularly is more important now than it ever has been because of all the variable valve timing, direct injection, multiple displacement engines, turbo setups, and just overall sensitive engines being pushed to their limits of efficiency. If anyone wants to know my opinion, change oil at 3k miles. Stretch to 4k on occasion with synthetic only. Make sure oil is full at all times. This is the only thing you can do to put the odds in your favor for long engine life and check engine lamps. I do not recommend anything else for changing oil on any on road engine 😃🔧

[@E85_STI]

@@EasyFixShaun that’s the best advice man and on my Subaru I change it every 2,000 miles and the oil I use is motul so you can’t find it at the local auto parts stores unfortunately but it’s one of the best oils to use. So I follow another guy and he takes these VVT sensors out and sprays them and cleans them so do you recommend that as well?

[@EasyFixShaun]

Nice man. Motul is excellent oil. Cleaning them can work a lot of times. If the screen does its job and stops sludge and caught early enough usually the solenoid is still good. Most times it's a flip of the coin though because by the time you clean them, fault codes are already set and the dash light is on 😀🔧

[@dailydadtalk]

So I replace the solenoids and have not driven the car yet. It has been a while since oil change so I am going to do the oil change at home, would you recommend draining and replacing oil before starting the vehicle again

[@EasyFixShaun]

Yes. I would get out as much old oil as possible. In a perfect world I would even flush it and change at 1k miles again. The sludge oil in the screen is from dirty oil, low oil level, or both. Plus these engines just seem to sludge up even in perfect conditions. Kind of a bummer they do that. There are a lot of sensitive things that run on the engine oil 😃🔧

[@touremandjouh9911]

hello I have code p0014 on my hyundai accent 2016. the check engine light is on the car consumes lot of fuel and car makes noise. I therefore changed the engine oil and the filters, the noise continues and the engine check is still present. I removed the two selonoide clean and I tested with the multimeter 8.5 ohm each . Theses valeurs ares normal ? . the connectors also 9V each. I noticed that the two selnonoide in their middle there is a filter but they are drilled, can the hole still create this anomaly? Thank you for answering me

[@EasyFixShaun]

You could try cleaning them out and see if that helps. It is worth a shot if you already have them out and you don't have new parts yet. As far as the ohm testing that is fantastic, i don't have the value for new hyundai solenoids for your car. But if you can find that it would help you make a choice to order me much easier. I hope that helps 😀🔧

[@wildwoodtop]

Dude I've got some weird stuff going on. I have 4 cam actuators solenoids, 3 of them are delivering 12 volts The other one has no voltage. Any info much appreciated

[@EasyFixShaun]

Start with checking fuses and relays. May need further diagnosis with scan tool and electrical pinout testing (dealership is usually best).

[@DylanMorehouse]

Yeah buddy!!

[@EasyFixShaun]

Glad you liked it!

[@karenpalermo2030]

Will the cheaper set of two work ok in my 2013 equinox?.It studders when I take off from a light.

[@EasyFixShaun]

They might work just fine. I have installed quite a few with no problems so far. There was one commenter that did not have good luck with the cheap ones. They are relatively cheap to give a shot in my opinion. But oem parts are the best no doubt. Whatever works for you. I hope that helps 😃🔧

[@TheFireOne22]

Any tips on how to remove to broken bolt that hold the solenoids ??!? A friend replaced both and the brand new bolt never tighten down but snapped

[@EasyFixShaun]

Ouch that sucks. Might need to drill and tap it unless you can get it out with an "easy out". Theres not cut and dry way to do bolt extraction. You need several plans to do it usually. So have a plan a, b, c, and d. Hopefully plan a works 🔧😃

[@TheFireOne22]

@@EasyFixShaun Thank you

[@davidyj9013]

If you have spark to the plugs and 55psi to the fuel rail but a no start, would that be the vvt solenoids or timing chain?

[@EasyFixShaun]

Hard to say. Sounds like a crank, no start?

[@joaquinbecerra3794]

Buen trabajo amigo, saludos desde Tijuana

[@EasyFixShaun]

¡Gracias, me alegro de que te haya ayudado! 😀

[@chadsheppard3576]

Always get the AC delco ones because they last longer

[@EasyFixShaun]

I agree. If possible get oem parts, they will typically last longer than everything else 😃 🔧

[@thehonorablejiveturkeyspoo6370]

Best video about this issue so far but did you have to remove the negative cable from the battery

[@EasyFixShaun]

Thank you! I did that to clear the codes from the computer 😃🔧

[@thehonorablejiveturkeyspoo6370]

@@EasyFixShaun Had the same issue so I followed your instructions with even the jiggle jiggle wiggle wiggle and it all worked out. Thanks. You have a subscriber now

[@EasyFixShaun]

Thank you! I am so glad it worked out for you 😃😃

[@hollyhewitt1058]

I just realized this may be the issue in my car. How long can I drive around with this happening? I know I can follow your guide this weekend but that's a few days away.

[@EasyFixShaun]

You should be ok for a few days. Hard to say exactly. I would make sure the engine oil is full and clean at the very least until the weekend 😃🔧

[@Emre3333]

My car is a 2012 Chevrolet Aveo. The vehicle has a P0011 malfunction. There's a mistake in timing, it's being fixed, but it's broken again. The Timing Belt has changed, but it hasn't recovered. Do you think Camshaft gear is broken? Would you please help me. I'm reaching you from Turkey

[@EasyFixShaun]

Hard to say from here what is going on with your car. I would recommend letting the mechanic correct the mistake if possible. Sorry you are having so many problems with your car.

[@Ss-zs9pp]

Hi recently had a problem stopped at a local shop to diagnose they checked these said they was ok found I had a bad coil so replace that 2 weeks later I happen to notice they didn’t plug these back up so I plugged them up and my car was running so bad stalling so I unplugged the back again and my car runs good so I left just the back one unplugged any suggestions what could be the cause? Should I replace that back one or could it be the o2 sensor or cam shaft sensor?

[@EasyFixShaun]

I am not sure what is going on there exactly. I do know that the engine computer will run ok with critical sensors left unplugged. It will run in what is known as "theoretical map mode". That is a pre-programmed fuel map that doesn't adapt or learn based on fuel trims, temps, rpm etc. It is rigid. It is designed to get you home if you loose a critical sensor. The valve solenoids may fall under the criteria on your engine depending on how the factory designed it. I am not sure about that though. The check engine lamp should be on if the sensors were unplugged. Checking codes would be a great place to try and sort it out 😃🔧

[@crystallynn6071]

are the Solenoid's the same parts for a 2010 3.6L V6 chevy equinox ?

[@EasyFixShaun]

They might be but I'm not sure. Click on a description link and type in your vehicle information 😀🔧

[@kelseyanglin9252]

I can definitely do this, thank you for the instruction! Just wondering, this code came up and had been on and off for a few days since I ran out of gas even though I stay consistent with oil changes. Would that affect the actuators do you think?

[@EasyFixShaun]

Running out of gas shouldn't affect them. But if the engine was spitting and sputtering maybe it tripped the code for some reason. Hard to tell. You could clear the code and try starting and driving again before you clean or replace them 😃🔧

[@benjamind5488]

I got this code after running on empty gas. After fill up, the car stalled pulling away from the pump. Replaced both of these, all fixed now. Too coincidental that we both got this issue after an out of gas situation. Even though I cant see how the gas could have caused this!

[@EasyFixShaun]

@@benjamind5488 I shouldn't cause the code. But if the solenoids were questionable, it's possible that is all it took to finish them. Chugging and rough running while running out of gas isn't a normal condition. While that was happening the solenoids may have been trying to compensate and it coincidentally finished them off. Best guess 😃🔧

[@adansoto7349]

Mi TERRAIN hoy prendió ese código después de quedarme con bajo nivel de gasolina , estoy por examinar los selenoides. Mi duda es podrían funcionar limpiandolos o tendría que reemplazar??

[@edhackett6058]

Funny thing, my ‘14 was just filled at the pump when the engine light came on. Car would start, but as soon as I put it in gear, it immediately died. Coincidence?

[@juggernaut8647]

Hello, if i choose to spray them down to clean them what would be best to clean them?

[@EasyFixShaun]

I use brake cleaner. Carb cleaner or throttle body cleaner would be my second choice 😀🔧

[@danhtngo504]

I got a p0013 code on my 2016 equinox..I changed both intake and exhaust solenoids. But engine light is still on..not sure what the problem is.. any ideas?

[@EasyFixShaun]

Where you able to reset the computer and it still came back on?

[@Bukavok]

engine light is still on and is reading the same code after replacing solenoids, any advice?

[@EasyFixShaun]

Sorry to hear that. If the lamp can't be cleared you may have more going on that may need more in depth diagnosis. Were you able to clear it afterwards with a scan tool?

[@sharikalewis226]

Got Codes P000D P000B and P0011 on my 2011 Buick Enclave I was going to change them but I see something about timing chain any information will help car won't start right now

[@EasyFixShaun]

Hard to say. Sorry for the late reply. May have some additional things going on.

[@michaelvanna8982]

Super clear expla...thanks! You are an angel...question: i have idle issue only on a stop..when put to neutral/park, idle is ok as it goes up to 800-1000rpm and no idle issues...though no codes, will this solve my car idle issue on top of probably cleaning throttle body with crc spray? Any advice is much appreciated..tnx

[@EasyFixShaun]

Thanks! If you don’t have a check engine lamp on I would start with the throttle body clean. If that doesn’t fix the issue then look at the solenoids.

[@docohm50]

Her 2016 Equinox 2.4L starts for like 3-6 seconds then stalls. Does it sound like these solenoids are dirty? No check engine light. I originally thought my fuel pump took a crap. I hope it's dirty solenoids.

[@EasyFixShaun]

I'm not sure. You could try cleaning them first just to see if that helps. Would not cost much to try either😀🔧

[@edforthewin8574]

Should’ve done a diagnosis to show the function and how they performed before and after.

[@EasyFixShaun]

Great idea! Thank you 😃🔧

[@70sharold19]

We broke one of the clips off inside of the connector. How do we replace it?

[@EasyFixShaun]

Zip tie it in place is the easiest and cheapest way. I have had to do it a few times. Those tiny plastic connector parts break easily 😀🔧

[@Blockizhott214]

Hi, I had the p0016 code had air filter on the print out at auto zone. Car shop did the parts. They said the oil was dirty, Will that make it not work correctly keep engine light on ? They reset code. Light came back on. I am going to get a oil change, but will THAT fix the problem, or I need to just get me a TOYOTA? lol

[@EasyFixShaun]

Yes. Dirty and/or low oil causes lots of problems, codes are one of them. I always recommend 3k-4k miles maximum oil change intervals with synthetic. Keep oil full at all times during the 3k-4k interval. Many people are going way beyond those intervals and make matters worse by not checking and filling oil level along the way. Do not follow manufacturers recommended intervals here!! Causes are sludge from running long oil changes and/or low oil levels. These cause a lot of issues, leading up to engine failure. The oil change + a quart of oil along the way are wayyyyy cheaper than an engine replacement 😀🔧

[@bigaparker1977]

What did you use to clean them.

[@EasyFixShaun]

Brake cleaner i think. Any solvent ghat you have should work ok 😀😀

[@JULIANysuHOHNER]

after you replace the selenoid do you delete the code?

[@EasyFixShaun]

Yup! Clear your codes and watch to see if they come back on.

[@JULIANysuHOHNER]

@@EasyFixShaun i clean the selenoid and put it back hopefully that fixes the code👍

[@EasyFixShaun]

Excellent! That works most times if there is debris in the screen. Good luck to you 😀🔧🔧

[@CharlieArtistry]

I just got an 2011 equinox. The check engine light is on. I did diagnose it as the solenoids. I changed them and cleared the codes but it comes right back... Same code. I'm also throwing a catalytic converter code. I put the cat cleaner in the gas tank to help clean it off but idk why its still coding from the solenoid?

[@EasyFixShaun]

Not sure. You may have other issues going on that need further diagnosis. Is the engine oil clean and full?

[@CharlieArtistry]

@@EasyFixShaun I was told the car recently had an oil change. the oil is full. Nothing smells burnt or looks nasty but it is a darker color. They used 5w 30. I had an 06 grand prix but I used synthetic in that car. Is the oil supposed to be dark in color?

[@EasyFixShaun]

If the oil was just changed and still dark it may have some sludging problems going on in the oiling system that may be the cause of some of your symptoms. The solenoids run on oil so if the oil is dirty lots of problems usually result.

[@matthewjharrell]

Wiggle Wiggle, Jiggle Jiggle 😆

[@EasyFixShaun]

Works every time! 😃

[@jessieellis]

Is it OK to use isopropyl alcohol 70% rubbing first aid kind since you could use alcohol on electrical parts because it dries out and won't damage it

[@jessieellis]

Please I need to know ASAP because I'm about to do it

[@EasyFixShaun]

Are you using it to clean the screen? If so, that should work great and not hurt anything 😃🔧

[@EasyFixShaun]

Yup!

[@2289273]

Some dust got into my exhaust selenoid and now my car is shutting off and shaking so bad on idle, could it be cus of the dust and if so how do I clean the socket?

[@EasyFixShaun]

Most of that dust may have gotten caught in the screen for the solenoid. I would remove and clean off at the solenoid and give it a try. If it got sucked past the screen, a new solenoid might not be a bad idea to try also 😃🔧

[@2289273]

Thanks for the reply the thing is that I replaced them with new ones, then this happen, the I pulled them out and they were clean, but same problem, I just put the old ones in and car stopped doing it haha idk

[@EasyFixShaun]

Nice effort. Sometimes cars are stupid like that. Especially with computers. They need a reset many times. Good luck, I hope it works long term 😃🔧

[@JorgeTorres-mb7nk]

Very helpful video. My ‘17 runs well after the solenoid replacement. However, when I’m idling the car shakes. Not sure if I should try and re-cover the engine.

[@EasyFixShaun]

Always a great thing to reset the engine computer. Sometimes it needs to relearn its idle and fuel trim adaptives. If that doesn't work drive it and see if a check engine lamp comes on for a misfire code. If it does that would be a separate code and should be checked immediately to avoid catalytic converter damage. Good luck, keep me posted please. 😃

[@JorgeTorres-mb7nk]

So far, so good. I did reset the code and the engine light is still off. Thank you for your help!

[@EasyFixShaun]

@@JorgeTorres-mb7nk Outstanding! Nice job!! Glad to help out. 😃

[@3MrNiceGuy15]

It looks like I have to do this. Is this a common thing for a car with less than 40,000 mi? Or could I have another issue?

[@EasyFixShaun]

Somewhat common in these motors. Especially if the oil is dirty. The oil sludge clogs them up even with low mileage😀🔧

[@ross2342]

Yes, it’s common on Equinox even under 100,000 miles. Happened to us around 60k

[@sahudansari2432]

I have gmc terrain What happen if diz one is bad?

[@EasyFixShaun]

Just one at a time can be replaced 😃

[@juanmontano4905]

Is easy to put the codes in or easy to use the scanner

[@EasyFixShaun]

A simple scanner like i have is cheap and easy to use. I got mine on amazon 😀🔧

[@nononsensegalnononsensegal4967]

Quick question what would you recommend foe someone who does not owe a machine to clear the code?

[@EasyFixShaun]

Sometimes an auto parts store can check and clear the code. Sometimes disconnecting and reconnecting the battery will clear the codes. I put links in the description for a cheap code reader. Some are $16.99 on amazon.

[@nononsensegalnononsensegal4967]

@@EasyFixShaun thanks for responding I appreciate it very much, my intake part just came I'm today and I will let you know how it went 😀 😉

[@EasyFixShaun]

No problem. Good luck 😀🔧