How To Make RGB LED CHAKRI Using WS2812B LED Strip

[@easytechzones]

Hello friends ,please watch full video. check description for code.

[@pcmobiletechnicalsolutions8504]

there is no code in desription

[@scienceoftheuniverse9155]

Thank you so much for the code. We really appreciate your great effort and time investment

[@ninadmandulwar6559]

Price btao 16x16 chkri ki

[@vijayjadhav4488]

Please share diagram

[@gstevenj52]

This is amazing! Since you were kind enough to share your code and design I was able to build one myself. My wife was amazed at how beautify it is. Thanks so much for sharing your hard work. You are great!

[@kiranbugaliarj-1814]

How you make. I also makes but the pattern are not complete they stuck at middle and not working properly?? help

[@HendrikBotha-y8j]

@@kiranbugaliarj-1814 Hello from South Africa. Can you please help me to also build it? I need help with the type of processor and setup in Arduino

[@johnrobertson3915]

New to electronics my question is what esp32 is it as so many different models?. Also how many pixels on led strip 30 or60?. Thanks

[@Rokis_reaction_hub]

Very very beautiful and cool decoration diwali light I like you ❤️❤️👍❤️

[@easytechzones]

Thanks

[@wladimirtech8645]

this is a very cool product. I am very excited. this is a masterpiece. we need to assemble the same

[@easytechzones]

Thanks

[@luizfernandes1563]

não consigo carregar o codigo, sempre dá erro Budurasmala_V1:2:10: fatal error: FastLED.h: No such file or directory #include "FastLED.h"

[@vdsmade]

Great idea 👷‍♂️👍

[@riteshsinha5900]

Liked the effects ..

[@easytechzones]

Thanks

[@dibyajyotisaha2349]

Valo hoyachyaa 👌👌👌👌

[@DiyHenryMartin]

Cool and beautiful creative idea lights 👍👌

[@abhishekmaurya3760]

Awesome 👌👌👌👌

[@easytechzones]

Thanks

[@zsavage1820]

Nice work... will this also work with the ESP32 and WLED?

[@easytechzones]

Yes it will

[@kanniahnaiduvenkatesh7094]

I made this, working very nice. 👌👍🏼🎉🎈🌹

[@hasankureshi648]

how much does it cost...?

[@kanniahnaiduvenkatesh7094]

It's comes around 2500/-₹

[@kiranbugaliarj-1814]

I made same but the lotus pattern are not glowing means not full design comes . Stop in middle and look like it hangs.what should I do

[@uttamdutta3664]

Can we apply the same thing with was2811 rgb led

[@easytechzones]

Same code

[@mirda-elektro]

Super 👍👍👍

[@easytechzones]

Thanks

[@jumatism]

Hi please can you about that ESP32 module is there any specific number there are so much numbers when searching from google

[@uttamdutta3664]

Can we make it 12x25 by changing the the value from 200 to 300 in code

[@goldstar9750]

Its a very good project... I want other video

[@kyawzintun4244]

If my led bulb is 8×13 =104 I can use this code?

[@rgentong1369]

Mantap bang, keren 👍👍👍

[@easytechzones]

Thanks

[@ravirtech1260]

This pixels how many price

[@wasdaletimelapse7658]

Hi my friend, i have just finished creating the chakri that you so kindly demonstrated and I have checked it all works using WLED app. I am using WS2812b LED's. I am trying to compile your Budurasmala sketch but it gives me the following error... Arduino\libraries\FastLED\src/fastpin.h:261:24: error: static assertion failed: Invalid pin specified I have tried Pin 22 as per your code and also tried Pin 17(D4) which is the pin I use with WLED but still I get the same error. I am using an LoLin ESP2866 ESP(E12) and I have uncommented the first line as instructed. I do hope you can give me some help on this as I am very new to Arduino and I have spent a long time to make the chakri and I am excited to see it working as yours does. Thank you in advance my friend.

[@scienceoftheuniverse9155]

That's really beautiful. Thank you so much for your great effort. Please Sir share the code with us to replicate it. Thanks indeed.

[@kamleshsheware9107]

product link for purchase which led strip use for this project

[@bhushandukare3605]

Sir aap pulse induction metal detector banake doge kya....

[@pierrevanovermeire]

When checked, your program does not work. Error : 'Lotus_4' was not declared in this scope. If so, fill in the VOID with void Lotus_4(); I get a new error: too many agguments to function 'void Lotus_4()' When I check the files Lotus 4 I see the following command 92 times: FastLED.show(); delay(sp); Here I think only the first ' FastLED.show();' can stand and the others all have to go. Or give another solution.

[@kiranbugaliarj-1814]

Sir I have RGB led strip of 4 input RGB and V so can i make the same project designs

[@donnygreen498]

Hi there boss 😎 do they work my sound and can u controlled by your phone. And if yes how

[@OmPrakash-jo7hf]

One banane me kitna charge lagega. Kitne din me banega.

[@utsabkayal743]

Can I use atmega328p microcontroller exchange of esp32

[@pierrevanovermeire]

Yes that is possible, but make sure to place the DIN on the correct Atmega pin 12 (pin D6). You must therefore also adjust this in .ino file, instead of 22 so put D6. Also set the GND and +5V correctly. You will also have to be resourceful to introduce many more moves.

[@donnytreure1213]

@@pierrevanovermeire Hi can i use a ESP8266EX controller? thanks

[@pierrevanovermeire]

@@donnytreure1213 Sorry, I don't really know an answer to this, I just watched it, didn't make it. Personally, I don't immediately see the benefit of using ESP. Also did not parse the programs as there is an error in the beginning of the data.

[@Premnishad1207]

Bhai Arduino ko pragram karke bhej sakte ho kya...

[@arnoldbencz6886]

Super! 👍

[@easytechzones]

Thanks

[@kironchandradeb1470]

Iwish to purchasae it......what is the prise ????

[@pravardhanus]

Can you provide the LED STUDIO file which can be loaded onto SD-CARD ?

[@anupsonawane1420]

Can we use Arduino nano or esp 8266 node mcu for this project ?

[@cutekids1760]

Use esp 8266 board dear

[@matthiash.454]

Hi 🙌🙌 Wau cool project 👌🏼keep up the good work👍🏼 Do you also still have for us the wiring diagram and code🤔🙋‍♂️

[@hasithafzr]

Go to “HAZI TECH” KZbin channel and go to playlists. Full guides with wiring diagram can be found there. This video uses 1 to 1 copy of it without even mentioning the original creator.

[@juliotavares4400]

Hi, I like many of your light effects projects with addressable LED strips, could you share the sketch? I would like to put this project into practice. Thanks.

[@easytechzones]

Check description

[@juliotavares4400]

Hello, I checked the description as you said and this time I found the link to the arduino code, but it doesn't work, I don't know why. What must I be doing wrong ???? Thanks for listening.

[@pierrevanovermeire]

@@juliotavares4400 Yes that is possible, but make sure to place the DIN on the correct Atmega pin 12 (pin D6). You must therefore also adjust this in .ino file, instead of 22 so put D6. Also set the GND and +5V correctly.

[@wasdaletimelapse7658]

Hi my friend, I sorted my problem. If you are using a NodeMCU board then you have to set Pin D4 as your Data_Pin and it works.

[@vishveshwarraii]

How to purchase this item from your sise?

[@mr.aniketdahake5021]

If i want to buy this from you can u sale it ?

[@JoseLuisHernandez-yy2pn]

Enhorabuena un bonito proyecto ,podrías compartir el códec para hacerlo como decoración de navidad. Un saludo.

[@bhanuprakashap.t8708]

nice, in video it is 8x24, but in code shown as 8x25, why and how please clarify.

[@panosstam3539]

Beautiful!! My friend please make a simple clock of 60 leds using esp 32. just a simple clock!!!

[@pratham8945]

Nice project. Please advise controller used.

[@josemariasolteroconde5096]

Excelente video, mi pregunta es, se puede utilizar el Arduino nano para conseguir esos efectos?... Gracias

[@ChannelSobari]

Terimakasih sudah berbagi ilmunya sukses selalu

[@easytechzones]

Thanks

[@UThant-j2m]

Thank you sir.

[@easytechzones]

Most welcome

[@anandbarnwal4590]

but how to download sketch?

[@hasithafzr]

Go to “HAZI TECH” KZbin channel and go to playlists. Full guides with wiring diagram can be found there. This video uses 1 to 1 copy of it without even mentioning the original creator.

[@uttamdutta3664]

How i can make my own effect

[@easytechzones]

Need to change code

[@shisirislam]

Vai Controllar kothay paoya jabe........ Jodi Bolten....

[@easytechzones]

online

[@kyawswenaing2740]

Boss leaving hard resetting via rts pin What is the problem? please 🙏

[@marklee1907]

cool project ,thank you very much.

[@sukhi2813]

Bhaiya ji kya hm mobile se contact karke setup kr sakte hai

[@easytechzones]

Kar sakte hya but thora sa complex hya

[@matthiash.454]

What size is the LED strip because of the distances from LED to LED ?

[@mangatsingh8608]

Good 👍

[@twinkle12176]

Hello sir I am big fan of you I collected all items for 16*64 dot matrix but sir code is not showing in your video please help me sir give me code for this 🙏🙏

[@bassmekanikproboosterz7791]

Excelente proyecto.... Se podria hacer en Audio Rítmico?

[@francocatera9721]

Hello, the link does not exist anymore, do you have other link?

[@mr.wrench1277]

Super👌

[@supiyanto6168]

Good project bro

[@vinayaknagalgaon123]

Hi ye sab material kaha pe milega sir

[@vijaykhatal5466]

Iska program mil sakta hai kya

[@zuhaershafique7154]

Good job

[@sithuhtway166]

Thank you somuch sir

[@Professionalboxing786]

Hello sir mujhe apse ye design banwane hai kitna price lagega aur contact kaise karu apko

[@samsulbahridapurwebsite]

how to change to 12x28?

[@utsabkayal743]

How we are able to download the sketch

[@easytechzones]

I will share . Link will given on description. Tomorrow

[@mahadevmirji752]

Esp 32 with code price boliye sir

[@sdey6162]

Excellent

[@mango3586]

How wide is that strip of leds

[@azeemsaifi6661]

Yah kitne pieces Kate Hain aapane aur yah wala circuit Kahan Milega Mujhe

[@jeevanjeethu6363]

Bayya mere liye 2 chayiye...😍😍

[@Manik_Kandeyang]

Your project is very nice. I need help, can you give me the code to run it in Arduino.

[@hasithafzr]

Go to “HAZI TECH” KZbin channel and go to playlists. Full guides with wiring diagram can be found there. This video uses 1 to 1 copy of it without even mentioning the original creator.

[@pierrevanovermeire]

Yes that is possible, but make sure to place the DIN on the correct Atmega pin 12 (pin D6). You must therefore also adjust this in .ino file, instead of 22 so put D6. Also set the GND and +5V correctly.

[@lakshmananperumal2677]

Super

[@Ex4calibur]

Very nice (Çok Güzel)

[@techy_channel]

First comment

[@easytechzones]

Thanks

[@ifaber68]

Very nice! :-D

[@DOLBY_Digital]

Is This code working on ws2811, if i use arduino?

[@pierrevanovermeire]

Yes that is possible, but make sure to place the DIN on the correct Atmega pin 12 (pin D6). You must therefore also adjust this in .ino file, instead of 22 so put D6. Also set the GND and +5V correctly.

[@lifeamazing6701]

I request 12×36 pixel design pixel led sir thank you somuch

[@easytechzones]

Ok

[@yasserrashad5091]

Possible implementation scheme and programming code my dear brother

[@sulesharad]

Can I use these code with arduino uno Changing pin

[@cutekids1760]

No boss

[@ShakeelAhmad-ml3kf]

Good

[@easytechzones]

Thanks

[@anuragkumar5532]

1mere Liye bhi banaa Lo kitne paise lagenge❤❤ bahi

[@RKKOTARYA]

Cool product sir but I'm want code will u give me plzzz sir

[@tusharsokhi5404]

Can we use Arduino uno?

[@cutekids1760]

Out of capacity use esp chip or mega, lenardo

[@MrBerlioz1973]

Code is not warking!!! - "Compilation error: FastLED.h: No such file or directory"

[@cutekids1760]

Include fast led library 3.1 or later

[@yasserrashad5091]

Great and excellent work, if possible, please, the circuit diagram and programming code... Thank you

[@hasithafzr]

Go to “HAZI TECH” KZbin channel and go to playlists. Full guides with wiring diagram can be found there. This video uses 1 to 1 copy of it without even mentioning the original creator.

[@JestinJacobPK]

@@hasithafzr link plz..

[@HellRacer1963]

Gefällt mir sehr gut, habe ihn so ähnlich an der Wand hängen mit 30 Streifen a 30 LEDs und 3d gedruckten Mittelteil, im Moment ist ein sp107e Controller dran für Musik Effekte, würde gerne mal deine Effekte ausprobieren, wenndu sie frei gibst Gruß

[@buchibabu6808]

Price

[@prayalsatpute9213]

❤️💚💙

[@easytechzones]

Thanks

[@maneleks]

Why ?. Skect..error..... Lotus_4' was not declared in this scope

[@kiranbugaliarj-1814]

Koi solution h brother iska mere me bhi pattern sahi nahi chal rahe ???

[@martinabreu8372]

Hello friends you program continer ERROR: 'Lotus_4' was not declared in this scope

[@maneleks]

Yes im too..error lotus_4' was not

[@bartekd3577]

Hello. Can you send circuit ?

[@electronic7979]

👍

[@jpscafe7648]

Belíssimo! Show de bola de luzes, de efeitos lunáticos.é da hora! Br

[@MrLion-uh7ot]

nice ;)

[@Jmf3dprojects]

Impresionante!!! Podría obtener el código para realizarlo con esphome? Sería la leche!!! Muchas gracias. Saludos!

[@rctechmods8165]

Power supply voltage and current batao

[@easytechzones]

5v 3-4 amp max

[@mrcreativoneonled507]

Super proyecto ,gracias por la info Por casualidad tienes el vídeo de cómo lo programaste Gracias