EB60 Transmission Fix 2011-2016 Scion tC... DON'T PAY MARKET PRICE!!!!!

[@brian6029]

Finally posted 1! I'm proud of you! 😆👍👍 On a serious note, your past vids have been very informative just like im sure this 1 will be so please do more then 1 a year. These kids need all the help they can get. 🏁😎👍👍

[@ChaseRacebox]

Haha I'll try my best to keep them coming! Will definitely have some vids on the xB here soon

[@BrunerTuner]

Great work, man! There's not many people making videos or working on this platform (I'm one of them lol) but thanks for making this! I will definitely share with other members of the community, and hopefully do this myself someday!

[@ChaseRacebox]

I appreciate it man!

[@SpeedyGeneralMotorsINC]

Can’t wait for the next video on your scion xb. I’m about to turbo mine now! Great work by the way on the tc

[@ChaseRacebox]

@@SpeedyGeneralMotorsINC Sweet! Thanks man

[@VampyreX13]

Great video! It was nice to see what the shop had to go through when I had them replace my bearing a few years ago.

[@ChaseRacebox]

@@VampyreX13 Yeah! It's not too bad of a job once you do it a few times

[@VampyreX13]

@ChaseRacebox lol, a few times. Once is enough for me already, thank you.

[@albertoherrera7467]

nice video, we must keep the scions alive. hopefully one day toyota can bring back the tc

[@oreally8605]

And the xB with 180hp stock

[@jairorondan3345]

Hi there! Thanks for your video! Do you have the measurements for the shim ?? where can i find one ? where did you get the shims ? Toyota diler they need to know whats the exact measurement of the shim !!

[@ChaseRacebox]

The specific measurement depends on your transmission. There are many different sizes. This transmissions I added around .008" shim but it's from a stack of shims I use for various other types of gearbox work. If you don't have your shim size, you can use modeling clay without a shim installed, bolt the case together, then disassemble and measure the modeling clay and that gets you close. You probably want to go up about 0.004"-0.006" from what you measure

[@kaminoshi713]

MR2 owners use our transmissions a lot for swaps

[@EliB0217]

My Camry has same engine as this tc, I wanna swap a manual trans in it because I hate driving auto and because I want to learn the skill. Thank you for the video . Have any advice for what I’m trying to do ?

[@ShaneVlogss]

this is dope !! i didn't know you did this on the side i definitely wanna learn my e350 transmission on my camry, i am currently about to fix my 5th gear on mt gearbox, i am definitely interested on seeing more of these types of videos ( also lol do you know where i can get some upgraded gears from ?? for the e350 or e351] ive been looking but it looks like only mtm Thailand .

[@ChaseRacebox]

Yes sir! They're really not too bad to do. Unfortunately I'm not aware of any aftermarket gears for the e350/351 transmissions. Best bet is to swap in the e153 (something I'll be doing soon)

[@OrvinmanuelFernandez]

where you can get a rebuild kit for that transmission. excellent work yours.

[@ChaseRacebox]

@@OrvinmanuelFernandez Have to call dealership unfortunately

[@RubenLopez-l8o]

My manual- 2011 scion tc has an issue on transmition. Bearings sounds crazy. How can I contact your shop?

[@mememaster8183]

Super informative! I'm gonna have to do this on my 2014 Scion tC in the near future. What were the symptoms like? I'm getting a slight whine that goes away when the clutch is depressed, and is quite loud when on the gas in gear. Furthermore, when barely feathering the gas the car will "jerk" in low gears, kind of like *gas* *skip* *gas* *skip*, did you notice any of these symptoms before the repair? Or should I be looking at the intake system as well?

[@ChaseRacebox]

@@mememaster8183 Thanks! The symptoms of this bearing failing will not affect the way the car runs & drives. It will start making noise though and it goes away when clutch is pressed in. It will keep getting worse until it totally trashes the trans

[@neednone4146]

you said that the xB makes around 600 HP (saw the post through the forums). does the EB60 handle that amount of power?

[@ChaseRacebox]

I do not know. I have not ran an eb60 in a personal vehicle. I think it would hold pretty close to that t without issue though. But like any transmission, the way it's driven has a lot more to do with it. For example launching a stock power car at a prepped drag strip on slicks at 7k rpm would likely break something

[@ShirimeCid]

Have you ever dropped them in a backyard and if so how doable was it? Nicely made an informative video dude, coming from being a fellow A/T rebuilder myself.

[@oreally8605]

I sooo want a 2016 tC but I have family members to haul around. After hearing that failure rate nevermind lol is that rate the same for the automatic? Great to see you, Chase!

[@ChaseRacebox]

Lol I hear you! Not really a family car. No the autos do not have this issue. Good to hear from you and thank you for the love and for always watching!

[@TrumbleAudio]

I did this job myself. The new bearing had little grease in it. I’m going to rely on oil

[@OrvinmanuelFernandez]

Hello, where can I get the oil paste, can someone help me?

[@marmiebrad5737]

hey man, i got a 2014 with classic input shaft bearings growl, do you have the part number for the black bearing? and anything else i should replace when going at it? no issues shifting with her just the noise. thank you

[@ChaseRacebox]

@@marmiebrad5737 The Toyota part number is 90363-35080. You might have to replace the oil funnel and shim as well, I believe I mention that in the video. You will have to open it first to verify.

[@corry8609]

I think my synchros are going bad in my transmission. I have a 2016 scion tc. No input shaft bearing noise yet. Is it just better to replace the whole transmission for this type of issue. I see your in DFW too. Should have you check it out for me 😂

[@ChaseRacebox]

I could definitely take a look at it! What is it doing? These can be a little costly to rebuild but probably not as much as the cost of s new trans. That would be the time to install the new bearing too

[@Jesppyy]

Even the brand new bearings that you buy from Toyota that supposedly "fixed" that issue still have a 100% failure rate.

[@ChaseRacebox]

@@Jesppyy That's not correct. Green seal bearings all fail. The black seal bearings are good to go.

[@mr2sw20k5]

Nice work

[@luigi3286]

What’s the part number of the new bearing ?

[@ChaseRacebox]

@@luigi3286 Toyota p/n 90363-35080

[@luigi3286]

@@ChaseRacebox that was nice video and very helpful 😊 I have 2014 scion tc 10 series and so far it’s ok but I also I have been changing the transmission oil every 15 thousand miles, thanks for sending the information .

[@Steamcrypt]

How did you get the new bearing on without putting it in the press?

[@ChaseRacebox]

A socket that fits the inner race of the bearing and lightly tap into place with a hammer. Much faster than using a press and doesn't hurt a thing

[@Goest420]

Can you get a tripod so you can set the camera somewhere an free up your other hand may help idk

[@RubenLopez-l8o]

Hi. In what State is your shop?

[@ChaseRacebox]

@@RubenLopez-l8o I'm just a hobbyist out of Springtown Texas. No shop to contact for me but I could do the work if you're local

[@RubenLopez-l8o]

@@ChaseRacebox Oh ok. Anyway, Im in florida at this moment, but soon Ill be moving near Dallas. So im trying to find someone who really understand this kind of cars (transmition issues). Car still working but noises are getting me crazy. Mine is a 2011 Scion tc . Ill be contact you again here as soon I move to the area, at the end of November to make this fix on my car. Dont have any other contact and hopefully the car gets to Texas with no problem. Thank you for your time ! Be bless!!!!