eBay glow in the dark powders and a little bit of deception.

[@Malandrin]

you know that we the viewers and your fans want to see a video of the alternative project that you mentioned, :)

[@Yukicanis]

He could upload it on p*rnhub. I think, that would be quite fitting. ^^

[@Brian_Boxtruck]

I'd totally switch to another platform for an unfiltered unrestrained version of BigClive. What's that platform Dave at EEV blog has been ranting about again? ...

[@DrakkarCalethiel]

@@Brian_Boxtruck Dave is on LBRY, maybe he did rant about Bitchute.

[@fxbear]

www.deviantart.com/ is another good spot for bigclive projects. I’d pay money

[@sfp4197]

How is the 888 like???

[@gavincurtis]

I am dumbfounded you got a product from China that wasn’t as advertised.

[@basshead.]

I'd buy that for a dollar

[@frostedlambs]

How could China do this to my children!

[@chrisakaschulbus4903]

maybe i should buy my face masks from china via ebay, seem to be the place where you can save some money

[@TehJumpingJawa]

I am dumbfounded that he trusts Chinese QA enough to say it's not toxic! While the active ingredient might not be toxic, there's no doubt 'other' stuff in there too.

[@TehJumpingJawa]

Also 'box full of unmarked bags containing miscellaneous powders' sounds like a customs nightmare!

[@nexusxe]

Hearing him mention Bad Dragon was like someone punching me in the face; I was SO not expecting hearing that brand name on this channel

[@ShiroTori47]

He's used a silicone Bad Dragon branded brick in a couple videos of his.

[@hexidimentional]

ngl, did an OWO there

[@D364000]

They don't just make sphincter spreaders. 🧐

[@hexidimentional]

@@rutherfordtechentium3973 gay and furry, ngl feels like going to hell in a handbasket, but oh the fun i'm having along the way

[@DualityElite]

@@hexidimentional wow okay you just described 25% of the furry community in one go I salute you

[@Andromeda2161]

I choked on my drink when he just casually without missing a beat mentioned making glowing jizzum for a bad dragon product. Was not expect that at all and I stan.

[@lornamarion5300]

🤣

[@EShirako]

I like how smoothly he drops that in there at first...just another little thing; no big deal! Me: @.@ "Wait, what?!"

[@pauliewalnuts5241]

🤣🤣🤣🤣🤣

[@syntaxhorror]

about using bad dragon toys in a video, KZbin runs image recognition on at least the thumbnails and if it decides it's too phallic it swings the demonetization hammer with full force source: someone I know who made a video about a novelty alien-shaped joystick (alien as in the creature from the movie), he couldn't understand why the vid kept being age-restricted as soon as it was uploaded, until we figured out if you squint just right the thumbnail looked like his hand was manipulating, huh, something else joystick-shaped :D he changed the thumbnail and as far as I know he didn't have any other problem with his video

[@AssassinAgent]

A slightly phallicly shaped object/speaking about history/weponry=every restriction possible Scams, computer viruses and predatory ads etc... =no problem I fucking hate YT, sadly, the alternatives are too small or just bad...

[@mikethedigitaldoctorjarvis]

@@AssassinAgent I have to agree there !

[@DeDeNoM]

They also monitor the content of the comment section to possibly derank the video

[@EliteFireSaint]

If it looks like a D. No money for thee.

[@michaelcassidy5684]

Speaking of demonetization, youtuber Michael Reeves doesn't buy from bad dragon, he prints his own "youtube buddies" and fires them from his home made gun. He's what would happen if Fannie Flambo had a baby with Electroboom

[@GaugePlays1980]

I lost it at the bad dragon video idea. You'll have to let us know if you make that.

[@Naphtha-zw6dh]

I need this to be made hahaha

[@TheB3e3]

Does this mean Bigclive is going to start posting videos on Pornhub? *shudder*

[@GaugePlays1980]

@TheB3e3 that actually is an idea. I know you're joking and all, but there's actually non-porn non-youtube compliant videos on there.

[@Naphtha-zw6dh]

@@GaugePlays1980 The non NSFW section actually has some amazing videos

[@fpscanada3862]

oh my god... seeing all those loose bags of "glow in the dark powder" i can hear my dad screaming from the grave, "don't touch that stuff its radioactive!!!!!!" Or when i broke a glowstick and he shit his pants yelling "i told you not to mess with those uranium sticks!!!!" My dad really hated glow in the dark anything

[@thalivenom4972]

to be fair, when he was a kid, they probly WERE

[@Oakleaf700]

My mum was the same!

[@kurtmogensen4815]

old bedside clocks had glow in the dark numbers that where highly radioactive (i belive it was Radium)sending a beam right into the head of the person laying in the bed it was also used on flight instruments and killed alot of ppl making these, so he was right,

[@lechonkawali5725]

Radium girls...

[@themischief420]

@@kurtmogensen4815 the clocks don't have enough radium to cause direct harm, you're wrong lmao. the problem with radium was it was in EVERYTHING, including skincare

[@AnthonyRieke]

This reminds me of a ghost busters shirt I had as a child. I didn't realize it glowed in the dark. One night I wore it to bed one night and I woke up in the middle of the night. It freaked me out because my chest was glowing. So I snapped the covers off and then realized it was slimer glowing!

[@ryanwilson_canada]

My sons room ceiling fan came with a glow in the dark Ghostbusters decal around the glass enclosure. I don't want to change it, because it's just awesome. Haha says the real Ghostbusters and I've been slimed.

[@electronraygun6346]

Was this a white t shirt with the Slimer from the real Ghostbusters cartoon? If so, I had one and had almost exactly the same thing happen when I was a kid! I hung it on a chair and turned off the light in my room and when I turned round I got quite a shock to see the glowing outline of Slimer!

[@sonotdown998]

I was looking at jeans today and the brand “Naked and Famous” has a Ghostbusters branded pair that glow in the dark.

[@jeeper390]

I had the exact same experience with my Slimer shirt!

[@carenrose6002]

10:40 ahhh, remember when it was "if" the coronavirus came?

[@maxhammick948]

1:34 "you may see a glitch every so often" camera immediately glitches

[@jacobgnech5187]

I had glow in the dark star and planet stickers on my ceiling as a child. FUN!

[@Mobin92]

New product idea: Glow in the dark cocaine!

[@boboften9952]

Result Glow in the dark sniffer dog.

[@shize9ine]

Hey where do I get that? Go ask the guy with glowing nostrils

[@Alexander_l322]

Yea makes your nose glow in the club so the bouncers know who to throw out!

[@AnthonyChopra]

haha i wonder if they got it in Poundland now haha

[@crimsonhalo13]

@@AnthonyChopra No, but they definitely have it in Poundtown.

[@raymondmucklow3793]

Awesome, one of the best glow pigments I've ever seen, was an A/C leak test kit I had bought, this stuff would blow your mind, unfortunately it was liquid and the container leak whilst in storage, and now I have a big glow in the dark container 😂.

[@muh1h1]

Somewhat ironic when the leak dedecting fluid leaks out... At least it was easy to detect that it did though!

[@raymondmucklow3793]

@@muh1h1 yeah I had the regular light on before I knew it my hands were covered in the stuff I didnt know it, so I grabbed the uv light turned it on and It was everywhere. But fortunately for me you needed a uv light to see it.

[@MrRedwires]

Sounds a lot more like Fluorescent pigment, not phosphorescent. Either way that stuff can get REALLY bright, which is great

[@MrExistien]

Yup we got thst stuff on our refrigeration machines. The cleanup after charging a system with it is messy and everything glows under UV forever

[@goamarty]

@@MrRedwires It's more a fluorescent dye than a pigment. It has to be soluble in the oil which lubricates the compressor and circulates around with the refrigerant.

[@Mint_drake]

KZbin may not like to see that video you mentioned, but I'd love to!

[@rolfs2165]

I've seen kinky crafting videos on HornPub before, so that would be an alternative.

[@JamesAllmond]

Vimeo doesn't give a damn, just saying...

[@Aristo12]

Maybe lbry.tv is an option. EEVBlog already has a channel there as well.

[@lycanrocvevo147]

I'd love to see it as well

[@martenthornberg275]

KZbin is trying a bit too hard to be child friendly so they don't scare away all the people with children from the platform (and their ad revenues).

[@navexelac2]

Their kid friendly thing fails. It's almost like they only watch a few moments of a video and determines that it's kid friendly. That "Ferrets- makes me smile" video is marked kid friendly, i don't see how sexual remarks and violence is suitable for kids >.> To me if they have the system in place=people will leave, don't=still folks will leave. Kinda one of those "Damned if you do, Damned if you don't" scenarios. Plus Parents should be doing monitoring of what kids see and watch, not KZbin. Simple.

[@WhatAmIGonnaGet]

It's the fools making the rules deciding what is friendly and what is not. Where is the adult / mature friendly section ? I rather NOT watch content only intended for children.

[@zig131]

I believe the whole "Is this for kids" thing is because they're not allowed to run ads and generate revenue for content that is "For Kids"

[@garethbaus5471]

They got in legal trouble because they couldn't eliminate children from regular KZbin, they are just covering their own asses, perfectly understandable given the circumstances.

[@1701spacecadet]

@@garethbaus5471 well it's the responsibility of the parents to monitor what their kids watch, not KZbin's. If parents can't be bothered doing that then KZbin should just say "not our problem' and stop acting like the Gestapo with creators.

[@BrianCurtisPCT]

To mix small batches of resin, I simply put down a couple layers blue painters tape on the bench, then dose and mix the resin right on the tape. Peel up the tape and discard when done. Nice and clean and not too much waste (assuming I didn't get overly aggressive when squirting out the resin A+B parts).

[@TechGorilla1987]

I use an old, flat mirror for this. A razor blade cleans the glass right up! I like your idea though!

[@SteS]

Does this glowing last for long?

[@DrakkarCalethiel]

@@TechGorilla1987 Old mirrors are probably the best thing next to silicone.

[@SianaGearz]

I use mini cupcake liners. You get a nearly lifetime supply for 2€, and they even seem to release the hardened content and clean themselves to be reused a handful times. Oh the hardened resin also releases from polyethylene, silicone and nylon.

[@23Scadu]

I've always used just a spare scrap of cardboard.

[@ronniepirtlejr2606]

Thanks for the heads up Big Clive! It would be cool to seal the end of a few LEDs with that strontium aluminate. Say make a circuit that has 20 seconds on, 40 seconds off. Battery extender emergency light :-)

[@bigclivedotcom]

I've dipped blue LEDs in glow powder loaded resin. It actually blocks a lot of the light.

[@ronniepirtlejr2606]

@@bigclivedotcom does the complete opposite of what you think it would do!

[@petermuller6923]

I've modified the eyes of a plush animal with homemade glow in the dark eyes and rgb LEDs and lenses. That looks so cool and really creepy indeed xD I can let the eyes fade through RGB colors, blink or flash them and if it's powered off, it glows very well visible for the whole night. You need to turn on the LEDs only for a few seconds and it glows for many hours. If you turn off the LEDs, you can see the glow even at daytime for a few minutes, because the bright LEDs shine directly through the thin layers of the glow in the dark color, charging it perfectly. This is a really nice toy for Halloween pranks with some speakers, a microcontroller and a sound module. It absolutely looks like a regular plush toy, until it awakes ^^

[@goamarty]

You said, you have to pack it tightly, to avoid un-excited powder to come to the outer side. So it is quite wasteful to fill them completely with powder. You should make it similar to fluorescent tubes: just cover the glass wall with powder. Either by filling in some quite low viscosity glue or lacquer and pour this out, then fill it with powder and also pour out the amount which does not stick or mix a very low viscosity resin with the powder, fill it in the vial swirl it around quickly and pour the rest into the next vial.

[@brianthompson8191]

Try packing the tube with the powder then add a few drops of 'super glue'- that will make a glowing solid mass in the tube.

[@thalivenom4972]

can be rather exothermic though.

[@tydshiin5783]

Might shatter the glass with the heat and it'll fog the plastic if there were any air bubbles Plus resin is technically super glue, but harder and better tho slower

[@DJ_Cthulhu]

Ideal for use in Scottish MRE ration heaters 😂

[@brianallen9810]

I'd like to see you run a Geiger counter over them just the same.

[@ec8107]

@Eddie Hitler IF it is just strontium aluminate. It's a Chinese product, hence the big if.

[@chemputer]

@Eddie Hitler Yeah, good luck getting that through customs lol, unless it's so dilute it's not putting off enough to be a problem. Not to mention that the expense behind actually doing that would be literally insane for no real good reason. It's one thing if they're doing it to save money, that's at least rational, but spending orders of magnitude of additional money to "dispose of radioactive strontium isotopes", which would require purification of strontium from the other radioactive atoms in the nuclear waste (this is *very* expensive and time consuming, all for the ~5% of Strontium in the waste?), handling of the radioactive material, etc., when they could just store their radioactive waste anywhere from completely to mildly irresponsibly like most countries do for a hell of a lot less cost and effort. That's called paranoia, Hitler.

[@Muonium1]

@Eddie Hitler Of course it charges with ionizing radiation. It's called a spinthariscope.

[@chemputer]

@Eddie Hitler "I found a quote that j think supports my position but I don't really understand it at all because otherwise I wouldn't use it because it doesn't" Thats referring to this paper (I found a link for you with no paywall, even): core.ac.uk/download/pdf/33591963.pdf And to be clear, it's talking about long term storage in cement. It wouldn't glow (the glow comes from doping it with different ions), and it wouldn't be cost effective, at all. As a long term storage (I.e. safe, effective, _proper_ storage of nuclear waste, which no countries currently do, though Finland has their Olkiluoto storage facility under construction which would be the first) it would work, that's what that means. And I'm sorry if you meant that as a joke, because it wasn't funny, I think given the fact that you said "there's always the possibility..." And then responded with a quote about it meant you were serious, and are trying to say it was a joke once you realized just how insane it is. I could maybe see how it could be humorous if you're really racist against Chinese people, super paranoid, and have no understanding of physics or chemistry, which, in fairness, that does fit the Hitler name. Also, no, sadly it wouldn't glow from ionizing radiation. The excitation wavelength depends on the formulation (the dopants, and the exact mixture of them) and is anywhere from UV to red, maybe near IR. Gamma radiation would be way to energetic to excite it.

[@chemputer]

@Eddie Hitler Mate, you're the one who got butthurt. I wasn't aware we were arguing. I was just adding to the discussion because it was so humorously wrong. You're an odd one. Anyway, in regards to whether Strontium Aluminate can phosphoresce under ionizing radiation, there's no (known, anyway) dopant that would allow ionizing radiation (which is several orders of magnitudes smaller wavelength than the light we use for this stuff) to cause strontium aluminate to be phosphorescent. A spinthariscope is very, very different, and works in a completely different way. From Wikipedia: "It consisted of a small screen coated with zinc sulfide affixed to the end of a tube, with a tiny amount of radium salt suspended a short distance from the screen and a lens on the other end of the tube for viewing the screen." I mean, you could probably make one with Strontium Aluminate, and some other radioactive element, but the mechanism isn't the same. I'd describe the physics of how they work, but I doubt you even care. Sad, it's interesting. Is your last name even Hitler, or are you just trying to be an edgelord? I have trouble taking anything you say seriously because I assume you're a troll. My sincere apologies if that's your birth name, that can't be fun.

[@billysbikes8671]

mix the resin on a flat surface if your using small amounts!

[@larbond]

Also, use a hair dryer/heat gun to make the resin go really runny. Helps air bubbles come out, extends liquid time slightly, but it sets faster when it cools.

[@Mentorcase]

Like the outside of the bottom of the container he used.

[@johndawkes7339]

Its a 'tappy, tap tap' carefulling now.

[@securi-t]

Crossover video between BigClive and AvE would break this side of KZbin...

[@johndawkes7339]

@@securi-t Then add the hydraulic press channel and a bit of Iron Maiden and the internet would be destroyed.

[@wannabetechnician7451]

have you already eaten some to make glow in the dark poop?

[@Alexander_l322]

Would that not kill him?

[@BrettSucks]

Nobody like me . only slightly!

[@SianaGearz]

@@Alexander_l322 It's completely non-toxic but it is a high abrasive. By all reason, should be about as bad as eating sand? Mohs hardness around 7.5, Quarts is 7, so a good bit more abrasive than sand, but not too much more abrasive. I think he would find digestive tract lacerations bothersome if he ate it regularly, but he'd live to tell us that we shouldn't do it.

[@misterhat5823]

He already has a video where he tried to make glitter poo.

[@Alexander_l322]

@@SianaGearz that's nice to hear but I wouldn't expect the power to be non toxic in all forms as its probably got some carcinogen or some shit in it that's not in the ingredients.

[@maicod]

Clive you could use LBRY to upload your dragon miniature p..... version there :)

[@0xc0ffea]

Looking forward to 'Bigclive's dodgy channel of glow in the dark smut and smut accessories' .. no really.

[@ScarfmonsterWR]

"Let me show you this" _proceeds to blind us through the screen_

[@ryanroberts1104]

This is why I watch your videos. Going on and on about something technical in great detail, with a random curve ball here and there. You have a great way of taking what can be a semi boring subject and make it worth watching for a half hour. And I'm learning! I think you should start a backup channel like other youtubers for "different" videos...

[@willowrabbit]

AAA I'd pay to see that bad dragon video lmao

[@Kaelygon]

Did I hear Bad Dragon owo I've heard that some gun channels started uploading to pornhub because of youtube's high restrictions. Maybe something to consider.

[@joefrayling9263]

I wouldn't be surprised if a large portion of certain channel types started to use pornhub or something similar as a new platform there's only so much fuckery KZbin can get away with before people start looking elsewhere

[@peterthepeter7523]

You probably mean InrangeTV and it did this mostly as a joke and a statement. They uploaded videos on different video hosting sites to try and get people away from youtube. At least i didn't hear about any other gun channels doing this.

[@Full_Throttle_Axolotl]

@@peterthepeter7523 I've definetly seen Gun Jesus next to a 2B cosplayer at a shooting range

[@someguy2741]

Deception on a chinese product?

[@maw9406]

Some Guy noooooo

[@NuclearTopSpot]

scandalous!

[@neonte13]

"Oh, cool! I've been debating about getting some glow in the dark powder for my mom. Could be some fun, little projects... Oh, maybe Clive'll have some good ideas, and I'll send her the link!" ... Clive- "something, something, dragon cum" ... "Or not."

[@johnmorgan1629]

When you said 'protect the delicate countries.' just used a few too many letters in the last word.

[@Travellerwiz]

Vinegar... Its a trick that an old fiberglass guy gave me. Vinegar neutralizes uncured resin and makes it super easy to wipe off.

[@ColinJonesPonder]

May I recommend LBRY as an alternative video platform? I found it due to Dave Jones of EEVBlog, so that's no small recommendation. He's still recommending it himself :)

[@Captain_Char]

Clive I have some pigment that's from technoglow, this stuff is so strong once charged it will light up an entire room for a while has a good charge life too of a few hours

[@fanplant]

I drilled out the screws for switch cover plates and glues tritium vials in. I know there's lighted toggle switches but I wanted to recreate radium glowing screws I saw in a 1925 electrical supply catalog.

[@AnthonyBate]

Clive you dirty bird. I'll never think of you the same way again!

[@FarleyHillBilly]

You cain't never trust a pretty boy wot glows in the the dark. that's for damned sure, and Lord knows I've tried. It never turns out well. Yeess.

[@ronniepirtlejr2606]

Big Clive, could you do a teardown on this device/game called "Don't lose your cool"? It's made by Hasbro. Cost $3 here in the states. It supposedly has a pulse sensor and can pick up your heart rate! But does it really?

[@Alan_Stinchcombe]

I have a £5 Yoho Sports smartwatch that estimates blood pressure optically! I'd love someone to explain the algorithm behind that!

[@bigclivedotcom]

Sounds like a simple red light transmission system that detects the modulation of the light by the blood flow

[@bigclivedotcom]

Not sure about blood pressure, but the blood oximeters use infrared to measure the oxygen level in your blood.

[@ronniepirtlejr2606]

@@bigclivedotcom Maybe? Makes sense to me. I've been learning electronics as small components. I bought one & tore it down. It's amazing they can get all of that crammed packed into a $3 toy! It had a blotted dot chip Inside at the main processing.

[@ronniepirtlejr2606]

@@bigclivedotcom I forgot to mention. The LED sensor actually has the word "PCB Sensor VOR4" wrote on the board. There's a total of 3 circuit boards with a speaker. One circuit board is double sided. "The sensor"

[@markhowards420]

For small amounts of epoxy , I mix it on a piece of the glossy card it comes on. And gently heating it helps it flow.

[@peregrine1970]

Take a very small pin drill, drill out the eyes on your coin of choice, and then fill the holes with red and epoxy?

[@FarleyHillBilly]

Silly twisted boy.

[@peregrine1970]

@@FarleyHillBilly Thanks! I try.

[@zoezzzarko1117]

Green would glow much better

[@happytorrentt4500]

Omg was knot EXPECTING to hear bad dragon in this video X3

[@Peter_S_]

Bad Dragon is the official supplier of such goods for this channel. Mentions are fairly common, especially on BigCliveLive broadcasts. Make sure you're subscribed to that channel as well.

[@28YorkshireRose12]

Mix it with a water based exterior wall covering (Mathys Acrylic Coatings, or Snow-Cem, for example) and have your own glow in the dark house!

[@ronniepirtlejr2606]

You would think for how expensive that camera is Clive, it wouldn't be so jerky.

[@bigclivedotcom]

I think the camera module is fine, and it works OK with their own basic camera app. But it seems to have issues with other apps that let you do things like lock focus and exposure.

[@drake47367]

Okay, you got me curious. I would like to see the alternative project please!

[@muzikman2008]

Pour some in your local water authority reservoir for instant "Peckham Spring Water" ha ha :-D

[@1kreature]

You could probably stretch the pigment a lot further by just coating the inside of the vial with a glue and letting it capture the pigment. No need to fill the center of the vial.

[@davyjones2994]

1kreature it wouldn’t be quite as bright, but that’s what I was think too

[@trustnoone81]

....but where's the capacitive dropper?

[@KeanM]

A platform for your more risqué videos could be LBRY.tv / LBRY.social. They also allow you to set up synchronisation of your entire KZbin video collection as a backup, which can be handy should you suddenly get strikes on your channel. It integrates with the LBRY cryptocurrency with the concepts of micro-payments either priced by you or via tips. It is still in its infancy, so it isn't on par with KZbin in terms of features - particularly with commenting and performance due to its decentralised architecture.

[@ian-c.01]

It's gaining momentum quickly though and it could certainly rival YT in time !

[@AlanLifeson]

Great video. I like glow in the dark stuff. I bought 5 Tritium key rings and they said they had a 10 year life, that was 22 years ago and they are still glowing. I also have some really good glow in the dark 3d printer PLA filament. I printed some astological stuff and stuck it on the ceiling in the bedroom 3 years ago and they are still glowing like mad ALL night long, and from very little charging.

[@jasonudall8614]

Ten year half-life. Thus halves brightness every ten years. So at 20. Half half. Or quarter brightness

[@ann_onn]

*@Alan Lifeson* What do you think *half* life means?

[@AlanLifeson]

@@ann_onn When I bought them the listing said ten year life NOT ten year half life.

[@Subgunman]

Very interesting! I remember some company was offering a "survival"flashlight/torch that could be used as a regular flashlight but it had an accessory that you could excite with the flashlight and use it as a low power illuminator for use in ones tent.

[@RenThraysk]

Yeah, have an AA/14500 light that has a GITD o ring sealing the lens. So when flashlight is on, gets energised and glow once off. Also came with a silicone GITD top hat style diffuser, and that also gets energised whilst in the light is on. It's a Lumintop Tool AA 2.0 (£17 on Amazon UK, $21 US, £12 from China)

[@dolphinpix]

Was Strontium not first discovered near the village of Strontian .... In the highlands of Scotland????

[@DrGreenGiant]

These were a pet peeve of mine when I was in the army. People would have them all over their kit and helmets! But now I'm thinking a fun alternative to battery powered LED string lights for the garden that you never need to worry about water or batteries deep discharging. Tempting! Tappy tap tap!

[@Offensive_Username]

Video went online today, comment is from one week ago. Hooray for early access confusion!

[@DrGreenGiant]

@@Offensive_Username lol. It goes out earlier to Patreons :)

[@Mark1024MAK]

Offensive Username - true aliens would know about the TARDIS technology that Clive uses 😉

[@zoezzzarko1117]

Try encapsulated powders for outdoor use

[@f.d.english5080]

I remember I bought some awhile back. I can't remember what color (had all of them) but had cool night planned with this chick, was about to get it on and I thought it would be cool to blow some of this Sh*t in the air ( had it in a drawer being charged) while the room a romantically dimmed. Big mistake 😂 The whole room smelled like sulfur. She left, never to here from her again

[@SomeMorganSomewhere]

Another platform: LBRY.TV ;) you can also auto-import your youtube videos onto it

[@MrAsBBB]

Clive love your naughty suggestion. I think we got the picture. I’ve been in a London night club at New Years when a friend spun a glow stick which broke and spattered everyone with luminous gunk . Such fun and ruined clothes.

[@VGScreens]

Looks like magic which makes me afraid to accidentally inhale something I know nothing about lol. Going to order some to play with anyway.

[@SianaGearz]

Long term occupational exposure will likely lead to lung silicosis. But otherwise, you've probably experienced worse. It's basically got a slightly higher hardness than sand and about the same reactivity as sand, it's pretty damn inert.

[@ro63rto]

I used to by the killabitz and watchlume kits but now I use the glopowders from Stuart Semple.

[@bigclivedotcom]

It might be worth comparing them to generic strontium aluminate powder side by side. He may be a marketing artist too.

[@ro63rto]

bigclivedotcom I'd agree on the "marketing" for his Blue powder as it doesn't flow anywhere near that of the Greet Lit. To ensure no airgaps, you could have used a small nail to tamp it down.

[@pzkpfwvitiger1470]

you mentioned bad dragon. instantly liked and subscribed.

[@Peter_S_]

Welcome. Make sure you're also subscribed to the live channel, "BigCliveLive" and have notifications set to "All". Bad Dragon mentions are fairly common there.

[@barkingdoggo3331]

Frickin furry. Same tho

[@BenQuigley]

I feel like clive has filled small round things with suspicious looking powers before...

[@WhatAmIGonnaGet]

"The factory that makes these packages must look great at night!".... By FACTORY, is a Chinese family in a grass hut on their dinner table filling bags from buckets which are probably in the trash from a factory marked "REJECTED".

[@HotelPapa100]

"the delicate countries" LOL

[@Sheevlord]

You might wanna try adding glow in the dark powder to casting resin and then try casting something. Casting resin is a lot less viscous and has a longer working time than normal epoxy, so it's easier to get artsy with it

[@MannyJazzcats]

Put the bad dragon video on you're website Clive 😂

[@Peter_S_]

Or open a new "NaughtyClive" channel on another platform.

[@misterhat5823]

He probably has to pay for bandwidth. Placing videos on his site would be a good way to get an outrageous hosting bill.

[@pszkola]

I have a suggestion for you to try... Sorry for the US terminology... Could you take a 4 foot F32T8 fluorescent lamp and replace the phosphor with strontium aluminate? And add a little tritium gas to the argon mercury mix? Would make for an interesting emergency light.

[@psygn0sis]

Powder.... from China... Well, you can be sure that they're 100% safe.

[@bok..]

idk, there some pretty nice chinese powders out there.

[@richardnanis]

its easier to mix tiny amounts of resin on a flat piece of smoth cardboard with a little splinter o kind of ;-) Its even easier to mix and to apply if you heat it up a little bit with a hot air gun (small one for smd soldering works best).

[@vizionthing]

Just call it 'body painting' and KZbin runs a mile bad dragon or not

[@H3wastooshort]

5:00 these would make really nice earrings for a party.

[@GamingAmbienceLive]

Clive thank you so much for this video I’ve been wondering which powder is best, please do test which powder stays lit up the longest time, like the type they mix into emergency stripes for fire staircase so ppl see the stairs in the dark

[@5Breaker]

I'm shocked! How dare you to tappy tap tap without a thumb detector! I'm speechless.

[@rayceeya8659]

Does the factory that makes these actually need lights any more? LOL J/K.

[@thomasvlaskampiii6850]

Glow in the dark alien splooge? Bring it on! Tell KZbin to come demonitize you!

[@MRL86_]

Greetings and happy pride month from a new fan happy to find your videos! Really keen to try some of those! Recently I was looking to buy a resin and glow in the dark powders to decorate glassware with. I'm not too sure what epoxy or resin mix to use that would stick to glass and be ok with being hand washed and slight exposure to dishwashing chemicals and rubbing alcohol.

[@bigclivedotcom]

You may have to experiment with resins.

[@1SpicyMeataball]

Bruh, this video was released in February. How many months must we dedicate to people liking things up their butt?

[@cecilcooper6210]

Imagine painting your walls with it and strobe-ing it with a disco laser ball!

[@MrPoe]

What is it wih you and the bad dragon stuff? Are you hiding something? 🤔

[@ann_onn]

"I'm sure they have them in Birmingham too." I recently heard that Phillip Schofield was gray. I must admit, I always had my suspicions.

[@sawspitfire422]

I don't think he's hiding anything, he did shove that electrode up his butt once XD

[@SearinoxNavras]

He's Scottish. Varka is Scottish. HmmmmmmmMMMMMMMMMMMMMMMMMMM.....

[@kennkeck1963]

Tritiums my favorite it never needs charging AMAZING! Bought one it sucked it was in like a rough cut glass tube open on ends Sucked!! Got one in a resin like block is AMAZing!

[@petaks01]

We need more of these glue in the dark projects ;)

[@f4r__]

Pro tip for handling the pigment, you can also use a straw with the tip cut at 45 degrees or so. Works very nicely as a scoop. Learned about that when I used to uhh buy lots of small quantities of powders, if you know what I mean.

[@xyanide1986]

"tappy tap ta~p"

[@Mrcovert]

I find Acetone works great to clean up any wet resin. Always have it available when working with resin

[@confusedvoyager7916]

For small amounts of resin, I use a bottle cap. You'd be amazed how little resin you can use with good effect. Isopropyl alcohol removes uncured resin like it was never there. (KZbin thinks "isopropyl" is a misspelling...LOL.)

[@Kineth1]

Fun with glow-in-the-dark: The US Navy uses glow-in-the-dark markers about a foot square in size in EVERY room in the ship, that identifies where you are in the ship (we call them bullseyes). I took apart a "disposable" camera for the flash assembly and made a light box with my rating/job emblem cut out on the face. After lights-out (sunset) I would occasionally bring the light box around and emblazon random bullseyes with my rating.

[@Rizon1985]

I once bought photochromic dye powder from ali and it was awesome tbh. Mixed the powder in together with transparent paint and then painted my nieces their shoes. Inside the shoes were completely white but outside they got all the stripes and details I added in an almost dark purple.

[@zoezzzarko1117]

What was your ratio of powder to clear paint?

[@Rizon1985]

​@@zoezzzarko1117 I didn't really use a set ratio. I had my transparent leather paint and added little bits of powder until I was happy about the intensity of the colour. I just made sure I mixed very well every time I added some powder. And do it outside in the sun or shine a UV light on it to see the colour it will be ofc. The bags I bought on ali were small but it was plenty. A second time I couldn't find the old paint anymore and used a white leather paint and that also worked. Just needed some extra powder. The darker colours work better in the final result in that there is a bigger difference when inside and outside (or inside UV lights).

[@zoezzzarko1117]

@@Rizon1985 superb info, thank you. And do you mean the darker colored glow powders? Or the darker the object you are painting?

[@Rizon1985]

​@@zoezzzarko1117 The first one. I have no experience using it on dark leather. The shoes I did for my nieces were mostly plain white and I added extra markings and stripes. My guess would be that it won't work to colour dark leather unless you use another kind of paint that makes a layer above on leather. Leather paint penetrates into the material so it would show very little effect on dark colours. But that is only my guess, i have no direct experience trying it.

[@richardrobertsDN38416]

Personally these are my favourite type of BigClive videos. These and the MBC 😊

[@enigmacrk200]

Pretty clever playing off the glitch in the matrix like a camera glitch....

[@GrenPara]

Hey Clive, Thanks for making the video it is great. Is the Strontium aluminate safe? For example: If a person purchased a large quantity and mixed it with varnish then coated a table with it. Would it be safe or could there be bleedthru if a person put food on the bare table?

[@blue_jm]

Ordering a lot of powders in small bags from abroad probably may get you onto a somekind of watch list of the authorities.

[@misterhat5823]

The USB butthole warmer probably already got him on that list.

[@bigclivedotcom]

I'm trying to get on ALL the watch lists.

[@captainheat2314]

@@bigclivedotcom even animal predator list?

[@bills6093]

Could you just fill the pendants with the resin powder mix instead of just the powder to eliminate the powder shifting around?

[@alexpaww]

Yes but it would be very very difficult to get it without bubbles

[@bills6093]

@@alexpaww Prob need to use 30 minute epoxy to let the bubbles come out. Then again, bubbles might look interesting.

[@Kr0nicDragon]

I would dump every pack into one big bucket of resin and coat the entire workbench so you could just draw on it with the laser

[@mauanderuk]

Interesting video I restore watches and sometimes have to repaint the dials, buy far the best lume is strontium aluminate, however its the purity you can actually make this stuff your self in a microwave but its very difficult to get in pure form. I believe Seiko invented this stuff and it became available in the late 90's.

[@t58beare]

That's what I use to relume certain dials.

[@MrAsBBB]

I think I am going to paint my runner bean canes with this just to scare the local wildlife!

[@ARandomFurry]

Furries Everywhere: 0w0 Did you say Bad Dragon? Me: Well played. Now trap them.

[@BrucesWorldofStuff]

An now we 'tappy, tap tap, tappy, tap tap' Aweeeee done now! Thanks Big Clive for this enlightening project! Now everything glows in the dark... :D LLAP

[@trulyinfamous]

I'd love for Clive to put some of the non ad friendly videos on P-Hub, like the bad dragon idea.

[@Tyty2k]

Lol damnit you beat me to punch, about getting better over Corona virus!!!!

[@carmatic]

i think that the optical properties of the resin might help any incoming UV light to scatter deeper beneath the surface, compared to just having bare powder, and also in turn scatter the glow from the deeper parts of whatever you are making that is my explanation for why the resin 'pebble' glows much more than the powder vial

[@siypic]

Yeah yeah ....photoluminescent powder...... tell us down at the station... get in the van.

[@charlieluna7237]

"youtube wouldn't like that" BUT WE WOULD!

[@tjmarx]

"it's trying to protect the delicate countries" 🤣🤣 I