{EBAY} They Are Cheap But Are They WORTH it!?!?

Well I took the gamble! Money is tight and project needs to get done so I decided to go with an eBay Standalone wiring harness. For two reasons actually. 1. Save time of learning how to break down my own and 2. SAVE MONEY! So far its been fine? Couple of Plugs are different than what I have?!? And maybe wires not the color the directions say they are, but other than that its goin...ok.
{EBAY} They Are Cheap But Are They WORTH it!?!?
Removable Doghouse I Made
• You Won't BELIEVE what...
Gauge Cluster Install
• SHOCKED I could make t...
Truck Cab Removal
• Cab removal of Chevy 2...
Drop Me a line at [e-mail]
Facebook
/ simon.says.g. .
Instagram
/ simon_says_gara. .
TikTok
vm.tiktok.com/...
#Gasser #Ratrod #Vegasratrods #LOUD #4x4 #4x4cars #ls #lsswap #chevybelair

[@bitsnpieces77]

Coming along great 👍

[@Simon_Says_Garage]

Yes making some big steps coming up here now

[@shaneharford1198]

Looking sharp mate

[@Simon_Says_Garage]

Thanks bud appreciate it

[@shadymaint1]

I'm using the factory harness from my donor for my swap.

[@Simon_Says_Garage]

Knowing what I know now. I probably would have done the same.

[@SwappedByMetro]

Did you pull the wires you didn’t need ? I think I may use my factory one myself and just de pin the ones I don’t use

[@shadymaint1]

@metrokustomz5816 very little modifications to the factory harness. The plugs I'm not useing just get zip tied out of the way.

[@SwappedByMetro]

@@shadymaint1 so you think it’s better to use the factory harness and just weave out the wires you don’t need ? Instead of paying for a new one ? Thanks for the response to sir

[@shadymaint1]

@metrokustomz5816 I'm cheap and the factory harness was free with my donor. I also used the under hood fuse block.

[@tookapocalypserising4892]

How’d this build come along?

[@Simon_Says_Garage]

I have a entire Playlist if you are interested kzbin.info/aero/PL1RtGTTZEobWcvbSkHENP9kjdkrq-GrWq&si=1T5NnOcwxPu5xb8V

[@theace155]

Have a full label list of the underdash wires? mine came without instructions

[@Simon_Says_Garage]

I have what it gave me but was off on a couple colors but figured it out.

[@anrtard9452]

Did you pin out the plugs on the blue side of pcm

[@Simon_Says_Garage]

I had pin out sheets

[@stevepope5484]

Are u gunna use the truck GAUGES? Whats the master cylinder from.

[@Simon_Says_Garage]

Yes I used the stock gauges a and factory master cylinder and pedal assembly

[@gerardgeter6750]

Part # ?

[@Simon_Says_Garage]

Sure here’s the one I purchased www.ebay.com/itm/324104459601?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=Gz8KZOhSRFu&sssrc=2349624&ssuid=vXE85biJSJi&var=&widget_ver=artemis&media=COPY