Royal Enfield Clutch adjustment

Clutch adjustment

[@ikpikp7470]

Hi I got g2 model enfield . There was problem with clutch - means when I tight the cable it lost power after short distance . Changed the entire plate set . Still problem , adjusted from the gear side - but after some time the clutch lever becomes loose . Is it clutch cable problem or any advise Thanks Joshy

[@ilduce7991]

Was this solved? I had this issue after my bike's gearbox restoration (2k model)

[@smiling.buddha]

Good informative video....

[@Abishekkarikattil]

Very helpful. Thank you

[@vishalmohan1995]

Which clutch push rod is better for city use? In my local market, there are two types available. One is single long rod, the other is two short rods with a ball. Which is intended for city use?

[@shailenduranjan]

Hi, your videos are very informative. I am facing problem of gear going to neutral every time when I am changing gear from (high to lower gears) 4 to 3 or 3 to 2. This problem is not there when I changing gear from 1 to 2, 2 to 3 or 3 to 4. I have 1972 model Royal Enfield 350. What could be the possible reason. In my area there is no mechanic for Royal Enfield.

[@ECFixeljin]

Do you use neutral finder for changing gear?

[@shailenduranjan]

EC Fix Dear friend, no I did not use neutral finder. I am finding this issue when I am riding and just trying to change the gear from 4th to 3rd or from 3rd to 2nd. When I am changing gear from 1st to 2nd, 2nd to 3rd and 3rd to 4th there is no such problem.

[@ECFixeljin]

@@shailenduranjan K friend. Adjust (make it tight) the gear operator selector

[@jameswatkins5551]

my 1984 bullet, when in 3rd Gear makes a grinding noise, but I don't feel that in 1,2 or 4th could you please comment on this.

[@king000775]

Boss good video, the last thing what you said is I cannot understand, I having of grinding noise and difficult to gear change easily

[@ECFixeljin]

Is the grinding noise is coming for the second and third gear positions? Are you feeling difficulty in all the gear shifting or to any specific ones?

[@king000775]

@@ECFixeljin the grinding noise coming only from 4th to 3rd and I feel hard to change all gears. Using neutral finder in 3rd gear is too hard, I need to kick hardly 3-4 times. Thanks bro for your reply

[@ECFixeljin]

Adjust gear operator selector to solve gear shifting issue. Check the tension of the primary chain for grinding noise.

[@king000775]

@@ECFixeljin thanks bro

[@upkarvirk5196]

Meri bike ka cluth dbane se kamm nhi krta cluth plates bhi nyi dslvai ha old model

[@ajayaj7139]

My bullets clutch is raising while going. any solution? New clutch plates installed.

[@dipeshmondal267]

Sir i recently buy a carburetor from your recommended site,. Carburetor is fantastic bt some different.. the pipe which they supply.. i want to know what is the use of this pipe

[@ECFixeljin]

Normally carburator has two hose (pipes). * one is for overflow which is present at the bottom *another at the side acts as a vent for releasing pressure and helps in free flow of fuel from tank to carburator

[@dipeshmondal267]

Sir can you send your number.. i can send you some pictures of bike.

[@ECFixeljin]

This is my WhatsApp no:8300701470, text me I will respond when am free

[@tusharkakade5052]

@ECFixeljin Can you pls paste the link for Carb here for old bullet? I bought new company carb but when I put vehicle on side stand it starts overflowing. I tried adjusting float but it still overflows

[@SurajSingh-no5rm]

std 2009 model me kitnni clutch plate aati hai

[@jaisonouseph3489]

Friend how to dismantle swing arm to replace arm bush

[@sankararedde835]

Very nice

[@ECFixeljin]

Soon ill upload

[@LalaAlok]

I have the same 4 speed gearbox. But my clutch is very Hard, cable brake frequently. What to check/adjust ?

[@ECFixeljin]

Open the gear box cover to remove the clutch rod and insert one cone set ball inside the hole from which clutch rod is removed then reinsert clutch rod. Now you can see the clutch rod projecting out. Then replace the cover and adjust clutch.

[@LalaAlok]

@@ECFixeljin thank you sir

[@LalaAlok]

@@ECFixeljin one more point sir I have poured EP 90 gear oil. At idle (engine start & gear in netural position), oil drop from gearbox cover. After engaging grear, dropping stop. What can be reason ?

[@jeraldselvam2051]

Anna ennoda 1988 standard after crossing a 20-30 kmph speed feels like pulling now and then . Any suggestions?

[@ECFixeljin]

Carborator clean panni parunga still problem eruntha point than check pannanum

[@nandhuuthamaraj9413]

In old bullet clutch is burning faster in 3000 km what could be the reason

[@ECFixeljin]

Check whether you have proper play as mentioned in this video ( inside the gear box)

[@rubanr6791]

Pro kicker spring atikati kalaruthu pro Enna complaint pro

[@ECFixeljin]

New spring potingala?

[@rubanr6791]

@@ECFixeljin amaa pro

[@ECFixeljin]

Kicker spindle la problem erukum

[@rubanr6791]

Seri pro thanks pro

[@somjithsomjith8891]

Bro nattil avidaya

[@ECFixeljin]

Eaniku Marthandam, kanyakumari district

[@somjithsomjith8891]

Ok njan oru mechanic aaa you are number plz

[@ECFixeljin]

@@somjithsomjith8891 8300701470 this is my Whatsapp number