How to connect and setup IDS X-Series receiver and remotes How to link remotes to receivers. How to set the buttons on the remotes.
Пікірлер: 45
@madodamdakane95894 жыл бұрын
Hi, thanks for the video. How do I assign remote buttons to different zones/partitions.I need to maybe have button 3 for inside the house and button 4 for the outside beams
@gameuploads28484 жыл бұрын
Good day thank you for all the videos been very helpful. I have a question if I want my remote to arm and disarm all zones at once where would I connect it on my main board? Again thank you
@ecologicaltime4 жыл бұрын
The connection is the same, the rules for which zones are armed or disarmed are about your coding you do in the alarm panel. When you disarm, if all zones are on partition 1, then all can be disarmed.
@myjdjames2 жыл бұрын
@@ecologicaltime i wanted to set one of the Other profiles created to activate when i press the remote button. is that possible? Basically i bypass a section or two when my pets are indoor and would like that profile to be the default when arming with remote
@James-Monique-Entertainment4 жыл бұрын
Thank you very much!
@ReinardWessels4 жыл бұрын
Thanks for the awesome videos. They've helped me a lot. Just bought a Bi-directional Wireless Zone Expander Hub (Xwave2 Hub) but not sure how to set it up. Do you have a guide for that, or some quick tips?
@ecologicaltime4 жыл бұрын
sorry i have not got that. thanks for your comment.
@ReinardWessels4 жыл бұрын
Figured it out, not too difficult 👌
@mikesinosi724611 ай бұрын
Wtwtwwwwtwwtq Wtwtwwwwtwwtq
@gosaitsentsima91405 ай бұрын
You are fast Sir, is there any simulation related to this for practice?
@RickDurban3 жыл бұрын
Thanks -another great bit of guidance! I would really love it if you could show how to link an IDS bi-directional remote … it's the one thing that has really got me stumped...
@simons_pics2 жыл бұрын
Great videos what mic are you using ?
@RogerOvenstone-qd4qt Жыл бұрын
What if you don't have an IDS remote but rather an et remote? How could you use it to arm the alarm
@Tig3rKen Жыл бұрын
So i have a client with a ET remote that was programed with a laptop for his x64 system. I have learned the ET remote in as the system stated success but the remote still not working. I am obviously missing something stupidly small setting somewhere but have no idea where to look - Please help GREAT VIDEO's btw - i subbed and follow you now - great variaty content for everyday DIY'r to follow and fix some simple home issues..... KEEP IT UP....
@dennisfarquhar380 Жыл бұрын
Hi do you perhaps know what the protocol is for the RS-485?
@muthaks2 жыл бұрын
Can you do a video of connecting wireless PIR to wireless expander
@FrancoisBothaZA2 жыл бұрын
Howzit. Just discovered all your IDS videos after a lot of cursing. After the last bout of load shedding my remote receiver is flashing a very fast green light, which I understand is a sign of trouble. Any way to debug that? I can't find anything in the user manuals. And not keen on forking out R600 for a new receiver. Would appreciate some help, if you have the spare cycles.
@1979za4 жыл бұрын
Great video. Is it possible to have the front gate remote activate the alarm system simultaneously (ie: the alarm system is always armed with the front gate magnetic contacts. Opening the gate with the remote will disarm the alarm and will automatically rearm when closed) Thanks in advance
@ecologicaltime4 жыл бұрын
You can set the alarm to disarm when opening the gate. You can have one remote being received by two receivers and the other receiver can be set to arm or disarm for that button press while the main receiver can be set to open gate for that same button press. Arming when closed via contacts, i am not sure. I don't know if IDS settings have a "zone close = arm the alarm" function. It sounds like you have a situation where someone is not rearming your alarm? You can auto arm the system as well. But to answer your question, you can a workaround and use the magnetic contacts connected to a relay (transmitter) which is also an arm signal for your alarm
@1979za4 жыл бұрын
@@ecologicaltime thank you for taking the time to answer. Your movies/clips are great. I've got a project that I'm trying to build a raspberry pi thermal camera with auto tracking for a perimeter alarm. Hoping it will be a cheaper and more efficient outdoor alarm/camera system
@wianbotha5979 Жыл бұрын
Hi, can i setup a remote that are and arm/disarm only partition 2 and not the whole system?
@nathanielgovender35002 жыл бұрын
Nice video, very helpful. Can an older bus reciever work on the x64?
@charless67162 жыл бұрын
hello, do you have a solution - i have the same question?
@James-Monique-Entertainment4 жыл бұрын
Hi :) Thank you for your detailed instructional video. Can you please tell me how to clear a remote? I have a remote that was previously used and I don't have the code to delete or add remote. Thanks. Regards.
@ecologicaltime4 жыл бұрын
ill do a video on it. its in the queue
@fanieposbus3 жыл бұрын
Thanks for this. I am trying to code an ET remote to my IDS X64 receiver, but I'm not getting it right. Any tips?
@ecologicaltime3 жыл бұрын
have not done that sorry
@techdelic Жыл бұрын
Did you succeed?
@bystandfoon39432 жыл бұрын
How.do program et transmitter tx 4 on ids bus receiver
@mbusonkosi6254 Жыл бұрын
Hey guys does anybody knows how to set sherlo remote receiver to work on ids x16 alarm panel? Thanks
@caronhill35414 жыл бұрын
How do I enable the siren beep sound for remotes when arming/ disarming? It used to work but have somehow been disabled?? Thanks in advance
@ecologicaltime4 жыл бұрын
video should be uploaded in the next few days
@caronhill35414 жыл бұрын
@@ecologicaltime Great, thank you
@ecologicaltime4 жыл бұрын
kzbin.info/www/bejne/j5DOd6urhNl8q8k
@xavierf6623 жыл бұрын
Is it necessary that you use a ids receiver and remote on there system
@ecologicaltime3 жыл бұрын
the ids receiver connects to their bus so yes its necessary. if you want to use other remotes, you will need to hard wire the panic but stay and arm / disarm wont work.
@ngscottburgh7640 Жыл бұрын
Can a IDS remote be programmed to arm/disarm partition 1 with button 1 and partition 2 with button 2?
@charless6716 Жыл бұрын
please help - since i upgraded to IDS X-Series receiver - each time the power goes (load shedding) the gate automatically opens up - this is posing a great risk- Thanks in advance
@ecologicaltime Жыл бұрын
the person has wired your relay as normally closed. Swap it to be normally open and then change on the gate side as well.
@charless6716 Жыл бұрын
@@ecologicaltime - thank you
@karineperdreau89395 жыл бұрын
Hi what is the maximum distance for the transmission .
@ecologicaltime5 жыл бұрын
depends on where it is installed. If behind wall, its less. If outside in plastic container its better. I can open gates from about 50m. Not as sensitive as the Sherlotronics receivers. I also find if the remote is in my car the receiver range is much less. If remote is ion hand, it works better (ie holding out of window or walking with remote)
@joshuansukulaluzizila95684 ай бұрын
It's helpfully but please you reapeting yourself to much