How to replace the window regulator on seven series BMW e65 - step by step

[@1967novss]

very good videio ever4ything went fine until i went to attach screws that hold the door panel on none of the hole seem to be threaded does it have threaded inserts that may have pushed out i will be tearing back into it to find problem thanks for discriptive details

[@القناصحسام-ل9ي]

I come to work with you because I am good at recycling it again without going back to a new piece to fix the old one

[@nounou7830]

Thank you very much, very precise instructions 👍👍👍

[@olegsalafonov8323]

How did U force regulator to move glass with removed panel? I cam see extra wire and switch.

[@vinodbansal1891]

very helpful step by step video. I have a slightly different problem on my 2006 750LI. My front passenger window is stuck at fully closed position and I am unable to open using the button on my driver door and the button on that door. There is absolutely no sound when I press the button. I have checked the fuse and they are fine. I am suspecting a motor failure. Now my question is my window is stuck at the fully closed position. Will I be able to remove the glass while it is stuck at fully closed position to reach to the regulator? Thanks for your help.

[@gtarules1]

did you figure it out??

[@lynxstarautomotive208]

You need to think outside the box on this one. Remove or disassemble the motor from the regulator. At that point, the regulator is freed, and you can manually position the window where you need it. Although, the motors on these rarely fail. What happens is the regulator fails and binds up the motor. Same concept tho, the motor needs to be removed from the regulator.

[@MrJimmy12345100]

Dude where are you from? I have never heard an accent like yours. "There's a torx screw heya heya and heya."

[@AndreSmitCP]

South Africa 😉👌

[@lynxstarautomotive208]

@@AndreSmitCPI’ve also heard some Aussies speak in a similar accent. Like the country side Aussies

[@AndreSmitCP]

⁠@@lynxstarautomotive208Yes, but this oak is definitely here from South Africa, it's in his linkedin profile as well

[@lynxstarautomotive208]

@@AndreSmitCPwasn’t disputing that. Just funny how broad the Aussie accent is.

[@القناصحسام-ل9ي]

😂😂😂Would you like me to work with you?