Using a 2009 Chevy Malibu with the 2.4L Ecotec engine I show you how to change the valve cover gasket
Пікірлер: 124
@fats2144 жыл бұрын
Great video was going to take my malibu to shop, but this seems like a easy job. Thanks just saved me money.
@jamesbones6264 жыл бұрын
89 In*lbs for anyone who needs the torque spec of the bolts
@peanutskustomz24664 жыл бұрын
What would the conversion be to foot lbs??
@HTXJM3 жыл бұрын
7.5 ft lbs
@thomaswalker6621 Жыл бұрын
Is that equivalent to 8ft.-lbs. I googled and got a Chevy document saying 8ft.-lbs. Also, my mechanic said "tight is tight with these. Don't snap 'em off but you can hand tighten" I did, it's fine.
@ChevyORwalk5 ай бұрын
2 ugga duggas
@tylerc89712 жыл бұрын
Just used this video to change my own. Saved me 200$ in labor
@voltmeter2 Жыл бұрын
I was looking for a video on changing gasket. You did a great job showing how to do it Thanks.
@jallenz21682 жыл бұрын
Thanks for this video. Made the job quick. People like you make KZbin what it's become over the years. Some shit we can use to make money and save money
@bflatbrass5 жыл бұрын
Great reference video! This afternoon I replaced the plugs in my ‘08 2.4 Malibu and discovered oil in plug socket (2nd from right); there’s no other leaks. I guess it makes sense to change the plug seals, head gasket, and bolt (rubber) washers together, so I don’t get any more misfire codes from the wet plug...
@Evan-eh9dd5 жыл бұрын
Valve cover and head are completely different parts of the engine on an inline engine, there is one valve cover, and one head. This video is about the valve cover gasket. *Arrangement from top to bottom: Valve cover, head, block.* The valves and their mechanisms reside under the valve cover, partially within the head. Spark plugs sit in the head, but can usually be removed without the removal of the head or valve cover. The valve cover gasket goes between the valve cover and the head. Head gasket goes between the head and the block. In a V-shaped engine there are usually 2 heads and 2 valve covers. Same with horizontally opposed engines (AKA flat engines) such as in Subarus and Porsches.
@@Evan-eh9dd Sorry, terminology exception. plug gaskets on '08 Malibu are accessible underneath the valve cover.
@robertfitzgerald95492 жыл бұрын
Thats where I found mine leaking today as well :/
@aprt44584 жыл бұрын
Want to say thank you!!! I was able to do my G6 today following your video. You saved me big money. Thanks man!
@Speakerboxers Жыл бұрын
Super helpful bro! Now I can Uber without passengers complaining about the smoke! Lol ✊🏿
@sonofaleph21403 жыл бұрын
Your video helped me out alot when it came time for me to change my valve cover gasket. Thanks.
@deanpage45333 жыл бұрын
Most crucial part is torque it down to 89 inch pounds. Just found out that previous owner broke a bolt off in head.. 2 hours later i finally got it out
@TheChuckyslair2 жыл бұрын
"Grommets", the rubber for the bolts. I've subbed , thanks for the vid on the belt. I was fighting and fighting for an hour, not thinking that taking out the airbox would give enough room. To me it looked like the mount had to come off.
@ajones9319 Жыл бұрын
How many grommets? I’ve got a coworker wanting me to do the valve cover on his. I’m also wondering are the bolts that hold down the valve cover different than the spark plug bolts
@nodak813 жыл бұрын
Thanks for the video, I just needed to know if I have to remove the VVT solenoids. I didn't even realize they aren't part of the valve cover at all.
@robertmullen24806 жыл бұрын
thanks man I have this engine in my saturn vue like your channell good camera work good advice glad I subscribed!
@LehewTech6 жыл бұрын
I'm glad this helped thanks for watching
@cisston420 Жыл бұрын
thank you! made the job a breeze, even if my husband wanted to take it to his mechanic friend mid job😂
@damonwilliamson186 Жыл бұрын
this video made the replacement possibile!!!! thank you
@longmiss Жыл бұрын
at 2:30, I think im missing those 13mm bolts...I just see holes...What are those for? Should i look to buy and install those bolts....I"m having misfire issues on the 4th cylinder and the next thing I'm looking to do is replace the valve cover gasket....lil oil in a different cylinder so im sure its needed. Great video btw
@ADdroneS2 жыл бұрын
Excellent job… nice and easy… you recommend cleaning before putting it back… o not?
@matthewyargee41993 жыл бұрын
I did use your technique and successfully installed! Thanks bro
@aim321fire5 жыл бұрын
Thanks for the video. Great communication skills.
@ehinspections Жыл бұрын
Great job! Where is the PCV valve on those cars?
@Jj-ku6sp10 ай бұрын
What are the actuators attached to? I noticed they didn’t come off with the valve cover. Trying to replace whatever they are attached to because the bolt to my intake actuator broke off inside due to being over torqued. Ty
@Musicmotivated5 ай бұрын
Thanks made it look easy
@jaymoney94385 жыл бұрын
Dude I have been waiting for this video
@LehewTech5 жыл бұрын
Thanks for watching
@RocketVR100 Жыл бұрын
I have a 2009 Chevy Malibu Ltz 2.4l ecotec. Identical to yours. Do you know if it has a pcv valve. And if so. My issue is it makes a squealing noise, but stops when I remove the oil dip stick. I did do some research, but I can't find the pcv location. Can you help?
@2knobs47 Жыл бұрын
you dont need the complete head gasket part for that model ? or only the valve need it?
@Schnarrtyp5 жыл бұрын
hi, my 2.4L ecotec has leaked between valve cover and oil filler tube but I have no idea how to take filler tube off. Does it required to open the valve cover to brings it out?
@Schnarrtyp4 жыл бұрын
update, my issue has been solved without open valve cover. Just use a paper clip to hold the lock then turn the tube CCW
@TheyCallMeGlizzi Жыл бұрын
@Lehew ! In what sequence do I tighten the bolts up and to what torque ? I can't find it anywhere 😭😭
@hicks.dusty_TX Жыл бұрын
Hey there, about to take on this job. I know this video was posted a long time ago but do you remember where you got the rubber grommets? GM Part No 12587285 is the whole bolt assembly with the grommets attached but the dealership wants $13 for each bolt. It would be much cheaper to just replace the rubber like you did. Let me know if you can. Thanks!
@LehewTech Жыл бұрын
I bought a gasket set from advance auto that came with grommets
@hicks.dusty_TX Жыл бұрын
@@LehewTech My local AA had one in stock. The gasket set I got off Rock Auto did not include grommets. Appreciate the tip.
@jonathanesquivel47687 ай бұрын
Thanks for the information. It was very helpful, but in your next video, please give the torque specification for it.
@elcomandante92996 ай бұрын
Just tighten em down. No torque specs are needed.
@uoyebut21514 жыл бұрын
on the 2.4 is there a cooling tube associated with the valve cover? Sources say that it rots out and has to be replaced? or is that only for the v6 engines. 2009 g6
@sashatoro27062 жыл бұрын
Great video same motor as my 2009 Saturn Vue xe
@TheAleman032 жыл бұрын
Do you know where the PCV VALVE is located in this car.?
@shrakkem4 ай бұрын
Thanks doing maintance on my moms car and found the spark plugs drowning in oil this will make it easy to fix. Just trying to decide if i want to do timing chain it has about 170k miles honestly didnt hink about it to you removed cover and i saw top of the gears for timing chain. anyone have a idea when a chevy malibu timing chain should be replaced?
@williamyoung53535 жыл бұрын
Yes I have one do you have a video of you changeing a oil pan gasket is it hard to do
@ShawnNoemiEscamilla-rd5lr Жыл бұрын
Do you need to put sealant on the rings surrounding the spark plugs?
@LehewTech Жыл бұрын
No
@glo37533 жыл бұрын
Thanks man, great video
@rickyvargas72975 жыл бұрын
Do u know the torque specs?
@Evan-eh9dd5 жыл бұрын
No RTV or other sealant on any of the gaskets?
@LehewTech5 жыл бұрын
No rtv needed on this one
@billo50655 жыл бұрын
where did you find the bushing you were talking about?
@DJCuhhhstin9564 жыл бұрын
they come with the valve cover gasket kit from most auto stores, theyre called grommets
@fkinarite4 жыл бұрын
Do you need to drain the oil before pulling the valve cover?
@LehewTech4 жыл бұрын
No
@dannyzamudio12522 жыл бұрын
@@LehewTech what brand of cover gasket did you use?
@mikefowler92465 жыл бұрын
Do u have to drain the oil b4 u start?
@LehewTech5 жыл бұрын
No
@dannyzamudio12522 жыл бұрын
@@LehewTech why not change the actual cover?
@LehewTech2 жыл бұрын
@@dannyzamudio1252 because there is nothing wrong with the cover
@1111comment3 жыл бұрын
How would you clean a clogged pcv orifice in the cover?
@ViperJay56 жыл бұрын
Very good for future reference! I'm just curious, why did you change the valve cover gasket? Was it just routine maintenance or were you having some issues going on?
@LehewTech6 жыл бұрын
Thanks man! I changed the gasket because it was leaking slightly, mostly on the side of the engine near the exhaust manifold. Soon I will have a video where I change the front control arms.
@DJCuhhhstin9564 жыл бұрын
@@LehewTech did the valve cover gasket repair fix your oil leak issue?
@LehewTech4 жыл бұрын
Yes it did
@ErectFinger97 Жыл бұрын
@Lehew Tech yo! 4 years later lmao... been running into more and more leaks as my malibu gets older, just did a crankshaft seal and then valve cover decided to start leaking in probably the exact spot yours did. Dripping onto the exhaust manifold causing a burning smell. Thanks for the video man, I'll need it in a little while
@jeffreymyers56623 жыл бұрын
Is it necessary to clean the valve cover when it looks like that or could that cause damage to the engine over time?
@fsu3784 Жыл бұрын
I always clean mine. Can use a parts washer or just scrub it. Make sure no water is left over or any particles that can get into oil.
@blakebaird63364 жыл бұрын
what was the torque specs for the bolts
@foxccc75172 жыл бұрын
Is this the same procedure as on a '12
@livingalive78862 жыл бұрын
Yes
@MexicanNYAmerican4 жыл бұрын
Where did you buy the gasket? I have that issue with what I’m guessing is oil leaking
@LehewTech4 жыл бұрын
Advance Auto
@joshuasanchez90272 жыл бұрын
Do u have the bolt pattern?
@billionairejr5 жыл бұрын
I have a 2009 chevy malibu Ls 3.5L V6... is it the same process?
@LehewTech5 жыл бұрын
No
@brianmaloney54304 жыл бұрын
Why did you not clean the valve cover on the inside since you had it off?
@LehewTech4 жыл бұрын
I wanted to minimize the amount of time that the cover was off as to avoid dirt/dust/debri from getting inside the engine.
@jordanebert95734 жыл бұрын
My 08 malibu has oil in the sparkplugs do I do this? I noticed tge oil in my spark plugs when i went to go change them I was trying to change them since i have t when i bought it
@LehewTech4 жыл бұрын
Yes
@Rpgsmt3 жыл бұрын
Did you change it and did it work ?
@dannyzamudio12523 жыл бұрын
@@LehewTech what's the torque specifications for the valve cover?
@marcosballi68662 жыл бұрын
How long did this take you?
@LehewTech2 жыл бұрын
About an hour or two I think.. was working at a relaxed pace on a sunny afternoon.
@markkeuter95524 жыл бұрын
Spacers? Spark plug tube seal
@Aj.d1311 ай бұрын
I have a 09 malibu 2.4 and I recently pulled the engine cover/intake and noticed there's lot of oil in the hose and in the actually intake. And the car seems to run poorly
@LehewTech11 ай бұрын
Is your air filter clogged?
@Aj.d1311 ай бұрын
@LehewTech no I actually replaced it like a month ago
@sneakerbay18365 жыл бұрын
What are all the tools used
@charliewilson3369 Жыл бұрын
That's the first thing I do is rip out all my electric and cut my pipes when I change my head gaskets!
@tonycotta66023 жыл бұрын
Awesome video great job but you did not clean under the most important part the under side of the valve cover .Thank you for the info.
@oscarivas2 жыл бұрын
How to replace the lifters and rocket arms
@skylerkunz68583 жыл бұрын
What if the coil boots come off when you pull them out?
@LehewTech3 жыл бұрын
Are they soaked in oil? If so they should be replaced. You may have luck removing them with needle nose pliers.
@oscarivas2 жыл бұрын
Thanks in advance
@brianmaloney54305 жыл бұрын
Why did u not clean up the gunk on the valve cover when u had it off
@LehewTech5 жыл бұрын
I had already pressure-washed it, Whatever was left is fine with me. The whole top of the engine is covered with plastic anyways
@sjm85104 жыл бұрын
@@LehewTech he meant why did you clean it before you took it off, why not after. I guess to avoid any gunk falling in during the removal.
@minaakbar74114 жыл бұрын
Sorry I am a mechanical idiot so I might be asking a stupid question but here goes: do you HAVE to wash it or can you just go ahead and change it without washing the engine? Thanks in advance!
@LehewTech4 жыл бұрын
Its best to wash the engine so you reduce the likelihood of dirt dust and debri from getting inside of the engine and causing damage.
@crdbr5 жыл бұрын
I just changed my 2008 Saturn's 2.4 Ecotec spark plugs. Upon doing so, I noticed some puddling of oil in the spark plug boot area. After researching online, it appears that this is due to a gasket issue. I was first thinking it was oil rings or other issues (engine purrs and no blue smoke from exhaust). So, I have not done the valve cover change but hope it solves the issue.
@LehewTech5 жыл бұрын
It should, unless the camshaft actuators are leaking.
@stevensmith83645 жыл бұрын
crdbr I have the same issues, a puddle of oil in my 3rd spark plug spot where the coil pack goes. I’m burning oil from it
@crdbr5 жыл бұрын
@@stevensmith8364 Do you have a 2008 Saturn Vue? Also, the elbow fitting to the Air Inlet duct for the PCV is ripped and not sure of the best method of repair for that. Any suggestions? Thanks!
@192966alex3 жыл бұрын
Same here. Third plug hole had a ton of oil in it
@tnt7527 Жыл бұрын
Same here and I have an 09 saturn aura. 2nd and 3rd spark plug. Going to change the valve gasket and hopefully this fixes the issue
@hom2fu4 жыл бұрын
4:49 RUBBER GROMMETS
@ETERNALALLAH4 жыл бұрын
How to replace head gasket on this vehicle?
@LehewTech4 жыл бұрын
Woo! Good luck i do not have a video on that yet
@jrosner61232 жыл бұрын
4:56 - they're called grommets, I think.
@tvviewer45002 жыл бұрын
@4:55 They are called grommets.
@nightskirr28844 жыл бұрын
Where is the Intake manifold gasket?
@t0ny2trill2 жыл бұрын
The answer lies in your question 🤦
@BanditRider865 жыл бұрын
I don't like the spark plug o rings fall off so easy. I lost one of them..
@margaritaolivares13094 жыл бұрын
Yo tengo un malibu 2010 y no encuentro la válvula pcv alguien me puede ayudar