EDGE CTS3 MONITOR UNBOXING AND REVIEW!!!

You asked for it so here it is! My video on the Edge CTS3 Monitor! Keep in mind these DO NOT come preloaded with tunes, there is just an option to use HP Tuners with the monitor, not 100% how it works, but its there. These work on a bunch of vehicles, not just diesels, so if you want one for your ram 1500 you're good to go!
Please Like and Subscribe!
Instagram @darkirondiesel
MY GEAR
GoPro: amzn.to/3mGCh7t
Tripod: amzn.to/3iPtcHk
Camera: amzn.to/3cf8lum
Mic: amzn.to/33PqcnQ
Drone: amzn.to/2ZWfj2v
Gimbal: amzn.to/3hP8Mg0
MY TOOLS
1/2" torque wrench: amzn.to/2FD3He4
3/8" torque wrench: amzn.to/2RNi3KY
1/2" impact: amzn.to/32OVUSQ
3/8" impact: amzn.to/32PrUqi
Drill and Driver: amzn.to/3kMgv0D

[@jrfish198526]

This is the most simple best video I’ve seen on this monitor

[@surfstarcc1]

Hahaha just installed one of those CTS3 with a Comp box on my 24V, I freaking love it!! Lvl 7 is good tune and turns some RPMs. BTW you've put on some good weight in 4 years 💪

[@darkirondiesel]

Haha thanks man! 👊🏻

[@camdang9143]

I had the first edge in my old 6.0 definitely want to get one for my lml, currently have the bullydog gt tuner/monitor

[@drakemiller9983]

Can I hook this up to an efilive auto cal or ezlynk auto agent?

[@TheCooper1971]

Thanks for the video. Would you happen to know if this Gauge will display the Fuel level on a 2006 Dodge 5.9 Cummins.? I’m not really trusting my OEM, and I’m needing to purchase a monitor system anyway.

[@DestinationHere]

This is really cool....however...none of the info on this tells me anything that makes sense. LOL. I just had to have my def filter replaced on my 2021 duramax at 35k miles. Im the second owner. I just want to be able to tell when my truck is in regen mode. I never have any lights or anything on the dash. The dealer said that since I only tow my trailer with it occasionally and then take very short tripds around town...that was prob why it failed. Any ideas?

[@surfstarcc1]

Short trips trips definitely soot out those EPA systems quickly, a good hard run on the highway usually blows that stuff out. My dad had the same problems until we deleted all that stuff, I've had zero issues in 80,000 MI.

[@imme7961]

Did you buy the monitor or the monitor and tuner?

[@petersannicolas8949]

How come you can't check your injecter balance on a Cummins or Power Stroke that sucks I ordered CTS3 for my 05 Cummins 5.9l can't wait to see it installed in my truck

[@darkirondiesel]

I don’t actually know the answer to that question, but it would sure be helpful if we could. It’s the easiest way to check how well your injectors are performing

[@thetechguy600]

Does this gauge tell when the truck DPF is in regen? Also, will this show EGT on newer trucks or do new trucks still not have an EGT probe?

[@Funky4me21]

I am preparing for performance installations on my 2016 Nissan that had a premature SCR failure.. Do you think I should install Tunes first prior to installation of the new tunes and other performance installations and removal of the premature failed part? Thanks for the Videos..

[@11bravo79]

How much?

[@JamesMasterPlaster]

Thank you so much you helped me make my choice 👍🏋️‍♀️🤺⚡️

[@stevenbader636]

Will this delete a factory truck or do you need to get the efi live and this?

[@darkirondiesel]

This will not delete anything, it is only a monitor

[@TylerBemis]

The loading screens still seem really long for something that’s “updated”

[@Holymartyr-13]

I’d totally buy one of those bud!

[@ericmartinez5633]

can you reset trans? like if ur in limp mode?

[@r0guetr00pa]

Does anyone know if these units are available for all cars with OBD2 or is it just the makes they mention of their website.

[@bmac9317]

@dark iron diesel i have a 2011 duramax 2500 lml, with a dsp5 efi live 5 pos. Switch. Could i use this to monitor all my guages and temps, but without the tuning portion from the edge tuning? I hope that makes sense, im typing this with about 2 hrs of sleep in the last 2 days lol.

[@darkirondiesel]

Haha ya man, the edge cts3 is just a monitor. Doesn’t have any tunes on it. You can just plug it right into your obd2 and use it to monitor gauges, your dsp5 switch will work as normal.

[@bmac9317]

@@darkirondiesel fuckin a Right! Thanks for the fast response!

[@michaelpipkin2660]

Does this show rail psi?

[@asablack1364]

I would like to see you sell those DID grills for my ‘15 RAM. That one you have is Killer.

[@darkirondiesel]

Hey buddy I got it custom made from ctcfab.ca he can make you one too!

[@petersannicolas8949]

Back up camera

[@PoliticalGangster]

I Want one! and I don't even own a vehicle.

[@koltontom5342]

Can it read trans temp ?

[@darkirondiesel]

Yes

[@danielallen860]

Can you leave these monitors in the sunlight all the time

[@darkirondiesel]

The guys I know that have them always leave them up in the dash in the sun and haven’t had any issues

[@jchambers5860]

I also have the MM3 but want something like this to monitor the things the MM3 doesn't. How would that work with 1 OBD plug ?

[@darkirondiesel]

I’m not sure. I don’t have switch on the fly tunes, so if I did it I would probably just tune with mm3, then unplug it and keep it somewhere in the truck incase I ever wanted to switch tunes, then just run the cts3 for gauges

[@jchambers5860]

@@quentinthomas6733 Good looking out man! 9.80$ delivered today haha

[@LuisGuerrero-wu1sy]

The old need lot wired tho make work nice. Video bud

[@junkzombiesllc3259]

😂 😂 your key. Have to do the same to my 02 Duramax.

[@jacobm9574]

I can use this on a truck that hasn’t been deleted right?

[@darkirondiesel]

Yup

[@gunfreak1911]

Love mine

[@patrickcooper1122]

What is a Pyro Accessory?

[@JimmyD6977]

The cable

[@maverickehnes9249]

Will this work on a Cummins?

[@JimmyD6977]

Yep

[@alanturton3394]

Does this make sense for a gas motor?

[@Mattcandy123]

Had one since they got released still little glitchy with remote start and some other times maybe needs an update

[@darkirondiesel]

Ya most likely would need an update if you’ve had it since released

[@Mattcandy123]

Dark Iron Diesel nice can wireless update it connect to wifi

[@sapper12e]

How does it effect the remote start?

[@Mattcandy123]

@@sapper12e mine for some reason when I remote start it it’s blank when I turn on the truck 2 taps and it fires up

[@markmummery]

How much are those ?

[@darkirondiesel]

About $600 CAD

[@steved.5628]

Talk me into getting one

[@mrgq1969]

Can you do tuning on these or is it just for monitoring?

[@edwardwalsh4657]

Not yet

[@arnejahr3531]

Nice tuner. Xl t shirt any cozies

[@darkirondiesel]

What do you mean by cozies? beer cozies?

[@arnejahr3531]

@@darkirondiesel yep

[@darkirondiesel]

Whenever I get the online store up and running I’ll make sure to get some!

[@Yippa391]

I'll buy a hat if they come in xl stretch fit.... And a shirt of course

[@dantsy6397]

For 400 large ones tho?? That's a bit steep just to see some clusters

[@moparproud3978]

No it isn’t steep

[@carterpercell8048]

1. Clean because you don’t have a million gauges 2. Cheaper than a million gauges

[@jordan122095]

I mean I use gauges because they look better and I also have a scan gauge which was only 150$

[@iphoneaccount1228]

Did everything BUT click on the tunes which is the only thing anyone cares to see before buying

[@Tom-Fisherman]

Same stuff, different screen....Meh. I think I'll save my money. Just seems they come up with a money-grab every 3 years or so. Now..If they just would come up with a more robust EGT sensor...

[@PoliticalGangster]

First!