EESDR V3 Release 13 The Good, Bad, Fluff and Bluff! Sorry AUDIO Level get loud after into!

[@pascalpascal8523]

hello N8SDR what type of microphone do you use on the sunsdr here I have studio project TB1 and I don't think what you think thank you sincerely pascal great video

[@radioxpert]

Very informative video, I like your thoroughness and honesty voicing your opinion (good or bad) on each aspect of the software. You are a valuable beta tester

[@ИгорьП-е3ы]

Rick! The audio analyzer can be used for external equipment, it is enough to turn it on, I understand that you are using an external microphone at the Mic PC input! This audio analyzer can also show the frequency response of recorded audio on a tape recorder!Try it, see for yourself! Rick show on your video how the audio analyzer is configured by giving a "Pink noise" the line of the audio analyzer should fall on the pink line!!! I ask you, as a tester of the program, to write to the manufacturer about how the audio analyzer works!!!

[@samwalker876]

Thanks for a very comprehensive review. Your evaluation was very helpful.

[@ИгорьП-е3ы]

Rick thanks for the video review of the program . I noticed on your video that the Mic meters indicator does not correctly show the RMS and PEAK values, try to set the microphone gain control to zero dB, apply Zero dB to the input from an external sound generator and go through the MIC meter scale measuring the supplied values, RMS values should be calculated using the PEAK * 0.707 formula, it will be correct RMS values

[@cvkitcarclubnl]

Hi, thanks for the nice evaluation, it was very helpful. I like the Sunsdr2-dx tranceiver, but my only huge concern is the software development. (closed software).

[@n8sdr473]

My recent advice is I'd stay away. There hasn't been much improvements in the software since I did that video. They're still missing full duplex and other things that they've promised and it really seems dead in the water. I sold my son to DX months ago and went with another SDR.

[@KC2QMA]

Thanks for the update. Have they added the MB1 GUI yet?

[@gusdx3654]

Great review! NR needs some improvements. Maybe A, B, C levels. As is, it’s too tight.

[@n8sdr473]

New updates are coming soon to NB and APF settings- where you will be able to adjust the values

[@ИгорьП-е3ы]

thanks for a very good review! please show me how the AUDIO ANALYZER of the transmitter works in the ESDR13 program? I have written all the questions to you by email

[@n8sdr473]

Analyzer hasn't changed,

[@paton3pat994]

Very good video as always Rick 73 Pat

[@n8sdr473]

Thanks Pat

[@manuelmaseda4875]

Thanks as always !!

[@n8sdr473]

My pleasure!

[@slickman1953]

Nice to see 2m offset is fixed... otherwise not much of a change, disappointing.

[@n8sdr473]

A few minor changes, and some cosmetic work, News today Dev group has another release with a few more changes, and now TX for Remote, with some current limitations on remote Tx. But good news is its at least in Dev testing stage. I'll try and do another video just showing changes in next couple days