EEVblog

The next step for Ahmed Mohamed
How to design your own digital clock from 4000 series CMOS chips.
Dave reverse engineers a DIY clock he built back in the 1980's as a teenager (he lost the schematics, twice!)
Before the days of microcontrollers, cheap PCB's, and internet mail order parts, you built stuff on veroboard using discrete parts from your junk bin salvaged from old teardowns.
Does it use Texas Instruments chips from Radio Shack? :-D
Schematic: www.eevblog.com...
Forum: www.eevblog.com...
Datasheets of all your favourites:
www.fairchilds...
www.nxp.com/doc...
www.ti.com/lit/...
www.ti.com/lit/...
www.ti.com/lit/...
EEVblog Main Web Site: www.eevblog.com
The 2nd EEVblog Channel: / eevblog2
Support the EEVblog through Patreon!
/ eevblog
EEVblog Amazon Store (Dave gets a cut):
astore.amazon.c...
T-Shirts: teespring.com/s...
Donations:
www.eevblog.com...
Projects:
www.eevblog.com...
Electronics Info Wiki:
www.eevblog.com...
💗 Likecoin - Coins for Likes: likecoin.pro/@...

[@gtwing8663]

All ahmed did was do a tear-down on an old clock and shove it in a "pencil case" that looked more like a suitcase, plus whats the point of a clock if you have to open the case to look at it. It wasn't an assignment and even I knew at his age that what he "created" was nothing to be impressed or proud of, pretty sure Ahmed's father is also a politician and it was his plan. People should really research before taking what the media says at face value.

[@HWGuyEG]

+GT WING This. Father is a millionaire, did a huge media run before the kid was even in trouble. Also started a massive lawsuit with top lawyers which will suck the school dry. Also funny seeing his official twitter account's first tweet is a RT by Anil "Dox up; journalism is activism" Dash who's a massive political shill.

[@atbglenn]

+GT WING I agree with you 100%

[@666Tomato666]

+Duderobi Patschie it's completely fucked up that teenagers get _arrested_ by the _Police_ for doing silly stuff at best. The world really went apeshit crazy

[@TheChipmunk2008]

+GT WING It doesn't bloody matter. The clock clearly doesn't LOOK ANYTHING LIKE A BOMB... so, what the motive was doesn't matter

[@spahr001]

+GT WING Ahmed took a perfectly good clock and made a toy bomb. A 3 day suspension for bringing that to school seems about right. The kid that got suspended for chewing a Poptart into the shape of a gun is who really got shafted. Not to mention the school that banned calling Wednesday 'hump day.'

[@Bigbacon]

this time, make a new schematic, fold up the paper and put it inside the case.

[@keithlegg]

Since no one else seems to be saying it, I will. Dave is a friggin genius for figuring this out when he was a teenager, especially with no internet to look up things. I could barely work a transistor at that age.

[@redneckbilly4340]

Sir, that clearly looks like a thermonucular warhand. Judging by the cable colors, it has the energy of 50 megabytes of TNT. Unfortunately I haven't been able to decode the Arabic hieroglyphs you wrote on the sheet of paper, but my team is working on it. You will pay for your crimes!

[@leisergeist]

This comment made my day.

[@StarDustSid]

I can hear the affection in your voice for this old project Dave. One of my first projects when I was into electronics as a teenager was a digital clock kit from Tandy in the UK. (I think.) I still remember the joy I had putting it together, and even though it no longer works, I haven't got the heart to throw it away.

[@ModelMotorworks]

Repair it!!

[@MrDoverfield]

A clock? It looks more like a bomb.

[@JohnCena-yk2mr]

+turntechgodhead100 Nice meme m8, i r8 8/8 cuz its gr8 m8

[@kTHElidd]

+John Cena i r8 8/8 gr8 b8 m8

[@ernststavroblofeld1961]

+turntechgodhead100 Indeed. At 5:27 , one can clearly see the port for the detonator.

[@MrDoverfield]

Ernst Stavro Blofeld You can also see the tnt.

[@Madcattlx]

+turntechgodhead100 Naw, It's looks 'shopped. I can tell by the pixels and from seeing quite a few 'shops in my time.

[@Dosbomber]

Dave being such a Back to the Future nerd, I'm a little miffed that he's missing the obvious joke about how Ahmed didn't create a bomb, but made "a shiny bomb casing filled with used digital clock parts".

[@BezosAutomaticEye]

+Dosbomber -and he didn't have time to build it to scale or to paint it....

[@martinda7446]

Wow! Take that to show your Prime minister. In a suitcase.

[@renelefebvre53]

I made a clock like yours in 1972. With circuits in TTL 74XX series of Texas Instruments. I used Nixies tubes powered with a voltage of 150 V and with suitable drivers (7441). All was powered by a transformer recovered in an old tube amplifier (EL84 / ECC88). To make my first circuit, I drew directly on copper the tracks with a pen and paint. I remember a bunch of holes drilled with a mini drill. My mother was very unhappy when she saw the small holes separated by 1/10 of inch in the living room table. I still have that table, and every time I see those little holes, I think of my mother and my clock. That was 43 years ... This clock has it been long in the refrigerator in the family home, but it disappeared with the removal ... damage. Bye Sorry for the google translation French ===> English

[@Cineenvenordquist]

+rene lefebvre Ha, a table with non-metric holes in it; you should 3D sculpt a piece of wood to put in as inlay. Wow, nixie was harder to find in '72, nice.

[@Mayank-mf7xr]

it all feels undoable when someone like me , a 2019 digital electronics fresher reads . your dedication sure was rock hard . hats off sir

[@ArtificialDuality]

The next step? I don't know man... Jumping from taking a pre-built clock out of it's case without any modification whatsoever to building one from scratch is a pretty big step.

[@EEVblog]

+ArtificialDuality Err, yeah, I didn't mean that literally.

[@THINboxKING]

+ArtificialDuality thats where i started now i build "robots", don't discourage learning from hacks.

[@THINboxKING]

+EEVblog Kia ora from across the ditch

[@ArtificialDuality]

THINboxKING I wouldn't discourage learning from hacks. That's how I started learning programming etc. I just would't call pulling the guts out of a clock, then mounting them in another case... a hack.

[@mharding1258]

Very much enjoyed that Dave. Thank you for all the time and effort you put into explainations. Its easy to grasp the logic stuff the way you bring it accross. I'm re-ignighting my love of digital electronics at the moment in my shed (the wife calls it the man cave). Currently refreshing the 80's child memories I have of messing with this stuff myself. It would be wonderful to see more video's like this. I dont know how many others are thinking the same but a show of likes might give some indication. Anyway, just want to tell you how much the community appreciates the hours you put into these vids. Very grateful Brit here.

[@NeonYukon]

10/10 bomb confirmed

[@NeonYukon]

**How to design a digital bomb 💥💥💥

[@thorstenoerts]

+EvilCatNip *Logic bomb

[@OK2BCK]

+EvilCatNip i'm calling cops

[@spoderman15]

+EvilCatNip At least it's a real clock, not that bullshit Ahmed (or whatever his name is) built

[@orichardson440]

Clock design is an excellent educational tool, not only for the self taught hobbyist but for engineering students as well. I remember having to design an alarm clock for a first year subject, having barely any knowledge of electronics or logic. The more I looked into the problem, the more I had to learn about electronics design and interactions between components improved. By the end of the task, I had designed the whole thing from scratch, and had an insatiable desire to understand the engineering behind everyday tech. The floodgates were opened, and all of a sudden I had a platform of knowledge to design anything I could imagine.

[@alukurd]

It was not a bomb, nor did he make a clock.. he just pulled the guts of an old consumer clock and put in a case.. Ahmed Mohamed is a liar. And if EEVblog can't see that, then I have no reason to subscribe.

[@ognjengalic4971]

Using Mains sine wave to sync clock. Can, can you believe that! That is GENIUS!

[@gamingSlasher]

+Ognjen Galić Very usual in old digital clocks. What needed some good thinking is the 12 hour problem. Very impressive.

[@taiwanjohn]

+Ognjen Galić IIRC, this was not uncommon back in the 70's (though alive, I was not aware of such things in the 60's). I'm pretty sure I had an alarm clock that did this (@60Hz for the USA). I was still just a kid then, but my EE dad explained it to me.

[@TheChipmunk2008]

+taiwanjohn Yeah, it's normal... is one reason you can't use a USAnian clock in Europeland, and vice versa, even with a transformer. (or couldn't, back in the day!)

[@Bradman175]

Mains sin wave is NOT ACCURATELY 50hz!

[@gamingSlasher]

Bradman175 I think they try to balance it so that the average is 50 Hz over some time.

[@tylisirn]

I once designed a discrete logic clock myself and wow, I got off real easy since we use 24 hour clock here, so my counting sequence goes ...22, 23, *0*, 1, 2... No problems at all for the hours reset. I hadn't even considered how much harder 12 hour clock would be!

[@sycabara9229]

reported this vid to the FBI For bomb building instructions

[@EEVblog]

+Sycabara You needed have bothered, it has all the requisite keywords, they already know.

[@Aaronarnold92]

+EEVblog True.

[@user-lp2op9uu1w]

+Sycabara Now the FBI will be all over Austria...

[@tobortine]

Dave, can you do a series on the most common discrete chips ? I appreciate that they're retro but there's a lot to be learned from how these work and how you would use them in projects like this clock.

[@InsideOfMyOwnMind]

As dated as that is, it still to this day has inspirational qualities to anyone learning electronics.

[@morten1313]

Even as a beginner hobby engineer who doesn't grasp concepts like ground and impedance well, I was able to follow along and work out some ideas, great video!

[@michaeldallas]

Thanks, Dave. Now we know what an actual hobbyist clock should look like. Very nice.

[@Stoneman06660]

How have I not seen this one before? A great project and sure as hell nothing to be embarrassed about. This is smashing stuff and shows you what you can do without PCB prototype fabrication and what not. Brilliant stuff!

[@JohnDoe-qx3zs]

Ahh, brings back memories of TTL and salvaged resistors (early '80s). So you were a young teen in '87 and now got your own wife and kid. How time flies when not trying to track it.

[@michaelgoldmann3734]

*grandpa voice* "back in my days we didn't have no fancy microcontrollers" :D

[@rambi1072]

Fucking hell, man, don't you think it's immoral to teach people how to create dangerous devices like this?

[@666Tomato666]

+Rambi “Rambi9000” Ninethousand yeah, he should have connected it to C4 right away to show it's just a clock and not a bomb!

[@EEVblog]

+Rambi “Rambi9000” Ninethousand Damn, I'd better pull the video!, what was I thinking?

[@williamday7132]

Dave, When you were building this clock, I was designing stuff for a major electronics company in USA. Love the diode gates!!

[@SatyajitRoy2048]

Beautiful discrete design really. You made me nostalgic to think about my old 2 digit digital bicycle speedometer I designed using CD4518 and CD4511 and NE555 as timing controller. I was in school then and design was very unique using IR LED and Photo transistor made from SL100B by cutting its upper metal shield. It used the latching feature to stick to the measured value and everything was possible. It was probably in the year 1990. Thanks to all the silicon vendors for making the life so easier now.

[@renekenshin6573]

The true spirit of electronics. I bet, even experienced electronics hobbyist will have a hard time replicating that box of epicness.

[@timewave02012]

When I wanted to do something "low-level" in the late '90s, I programmed Z80 assembly for my TI-83. What are the kids are doing these days?

[@mdasikkhan1610]

Tiktok

[@giverous83]

Don't ever throw out those 4000 series, I recently got into some amateur electronics thanks to your videos and I'm playing with 4000 series stuff at the moment :-) I'll always take em off your hands, and happily pay you for them. I get mine from dodgy chinese websites and they take so long to arrive. They're really cheap though and a LOT of fun. Just got hold of a couple of those 4026 and some seven segment displays.

[@diyelectrovids6536]

Wow Dave, that's so genius of you to design and build that digital clock with CMOS logic

[@BigJohn4516]

Back in the day, as in late 80’s, I was working with a group that was testing explosive detonators for safety. We were measuring the accuracy of the delay, using a multichannel Honeywell reel to reel recorder to test multiple detonators at once. The problem was that we needed an accurate time mark generator to measure the delays. I made a tiny, 9 volt battery powered box with a 10 MHz oscillator and counters. The trick was putting in hundredth millisecond, millisecond, and hundredth of a second code bursts which overlayed a count by modulating the width of the pulses. I used some of the same analog trickery you did to shift in portions of the counter output without losing the accuracy of the leading edge, but visually apparent and readable when the tape was replayed. I think that the mixing of analog and digital like that, with diodes, transistors, resistors caps, with CMOS gates is something that has all but vanished from design. It’s not a great loss, but there is a degree of understanding that is now abstracted away.

[@ixamraxi]

>implying that designing an analog clock from scratch using discrete components and digital logic is "the next step" after disassembling a commercial clock and putting it into a new case. That's like saying once you've modded a computer case, the next step is to design and build your own computer architecture from scratch...

[@EEVblog]

+Amra I didn't mean it literally. But perhaps it's something he can work toward to build his skills.

[@P07H34D]

+EEVblog He can use a screw driver. You expect him to design his own circuitry?

[@AntiProtonBoy]

+Amra this is not /pol/

[@dellagd]

+EEVblog I thought the joke was on point ;)

[@ixamraxi]

EEVblog I was being facetious, but thanks for the reply! :) AntiProtonBoy Your standards for what belongs in /pol/ seem suspect. dellagd Im glad someone got it! :)

[@bigjohnsona2]

Hi Dave, I Love seeing your videos and stuff you repair and build. Much more interesting then general teardowns. I'm nothing more then a general hobbyist and sometimes have no clue what your saying but i have learnt so much from watching you. You inspire me to build projects they are nothing special and pointless and no way near what you can do but i try. Keep up the good work.

[@Mythricia1988]

I have a bunch of similarly dated parts laying around from my dad's old student projects. A frequency counter among other things using these same types of chips! They still work, too. Was fun to play around with when I got to the point of starting to understand logic gates and IC's.

[@didaloca]

This exact video inspired me to build my own. I used 4510 fed into 4511 and AND gates to reset at 60/24. It works great!

[@Jeremyveleber-makes-stuff]

This is my favorite video you have done in a while. I would love to see more like this. Teardowns are fine. Mail bag is ok. This is just fun! It is like reading a Forest Mims book.

[@TheRealSasquatch]

I can do this programmatically, I can flowchart this, but translating this into cmos logic with supporting circuitry as Dave has - way beyond me. The fact he did this as a teenager makes me so envious. Hat's off to Dave and everyone else who got the EE bug earlier than I did.

[@hoffmannolsen]

Dave, simply one of your best teaching videos. Thanks! A perfect follow up video would be, how to do this today with let's say an arduino and a RTC.

[@leosbagoftricks3732]

Great design and teaching moment! I too am obsessed with scratch-built clocks.

[@habiks]

Ahh memories.. I made similar clock 15+ years ago using jk flip flops as counters and basi logic gates for setting and resetting them. it had pcb 2 boards - one with counter and the other with 7seg led decoder and the leds. You had to switch it into "high speed mode" and wait till the clock forwarded to real time, then set it to normal speed.

[@kalleguld]

24h clocks are just so much easier :)

[@cemx86]

At 9:56 Dave mentions that he tapped off 50hz to use as a reference clock. I did the same thing about the same time with our US 60hz power. Maybe 50 hz would be a bit easier to just divide by 5 rather than by 6 to get 10hz to get the 0.1 second digit ticking along. We really need to change our power cycles to some nice binary 256hz or something! Wouldn't that be sweet! At that time I only had a single channel Heathkit scope (1mhz?). As an accessory to do digital design I built a little mux to allow 5 (10?) digital inputs by summing the individual digital signals with individual stepped DC voltages. Worked a treat. Ahhhh, memory lane.

[@steveclark3379]

Hay Dave, Nice I love all the old school stuff, excellent walk through of the circuit...... :-)

[@JuergenBoehringer]

Hi Dave, yes I have grown up as well with the 40xx-Series. And even today, if the job is too siple for an Arduino, such a chip does its job. The Vcc 3...15 Volts and the nearly intinite input impedance are just great features. I hope the series will live for ever.

[@Rcbeacon]

Daves mention of low power and 4000 series reminded me of a gas billing meter I briefly worked on back in the 1980s. It had a custom LCD display with individual segment drive (gated square waves, no LSI drive chips) on multiple circuit boards covered in 4000 series chips. The whole thing operated for a couple of years on D size batteries. It was almost a computer made of standard 4000 series chips. It recorded natural gas use at a car assembly plant here in Wellington NZ. I still occasionally work on a Japax EDM machine that is based on a series a Toshiba chips that are CMOS but have TTL pin-outs. Probably a very early CMOS series from the 70s. 74HC series chips fit and sometimes work as replacements. But the original machine designers relied in many places on the propagation delays and 74HC chips are too fast, causing the logic to fail.

[@michealmyers4515]

Can't find words to thank you Dave!

[@turboslag]

This reminds me of the clock I built in the late 70's, still going perfectly now. It was from a kit using a single chip clock, everything except the display drivers is on the chip. It's 6 digit with a single led as the am pm indicator. I spec'd mine with the Xtal oscillator time base upgrade, on a separate board, and the power fail battery back up also. Took a bit of fiddling to get the Xtal osc set for accurate tine, due to temperature drift. It swings around -15 to + 15 seconds summer to winter. Quite a neat kit with good F/glass boards, ribbon cable wiring etc. Would like to modify it to radio time signal setting, not sure how that would be done though.

[@metricmine]

Wow. I didn't know I could have done this much with my 4000 series ICs. I have an old collection gathered from my teen years, desoldered from old equipment. Had to pause this video to check on them. I could never really throw away good working parts.

[@SebastianScholle]

Great piece of nostalgia. Very informative! I learn more and more each time I watch your videos.

[@KwasiuYasiu]

Dave, It's absolutely fantastic. You implemented so neat solutions that it is unimaginable. I must admit that people are thinking different today.

[@WorksOnMyComputer]

You need to have this running on the bench behind you. This clock deserves to run. :)

[@lacombar]

The next step for Ahmed Mohamed to learn the intrinsic of a torx screwdriver. He already mastered the philips screwdriver .

[@Pieh0]

Certainly better designed than Ahmed's clock, seeing as he just ripped out the guts of a bedside clock and shoved it in a case. 0 Electronics skill needed.

[@hingeslevers]

+Pieh0 Bah he's just a kid. You need some knowledge of electronics to dissassemble and reassemble an electronic device without breaking it.

[@RickyX64]

+hingeslevers No you fucking don't, you just need a pair of working eyes...

[@Pieh0]

I know he's a kid, which is why i'm not screaming from the mountains calling him a liar and such :). But all he did was remove the plastic shell, and glue/bolt it in something else. I'm more pissed off that no one around him seems to care about him dinking around mains voltage stuff. The transformer and board all at 120v just "flapping about in the breeze" as Dave would put it.

[@hingeslevers]

+Pieh0 Agreed. But still, I blew up some electronics when I was a kid while tinkering with it, so at least his didn't fry

[@ethanpoole3443]

+Pieh0 The photos I saw had a rather generous amount of electrical tape wrapped around the 120VAC transformer connections. Maybe not as ideal as, say, soldered connections and heatshrink, but certainly adequate. Besides, I was working with 120VAC, and some 240VAC, circuits beginning at the age of 5 -- yes, as a 5 year old I did get permission before actually energizing such circuits due to my age, but no changes to my work were ever required by my parents nor my grandfather (a licensed electrician from whom I learned electrical). If I could do so safely as a 5 year old then certainly a 14 year old can safely wire and plugin a transformer.

[@kevinobrien8803]

Nice! Just been playing with 74 series counters this week. So perfect timing for me. The diode logic gates is a fascinating way to implement combinatorial logic. Never new about diode logic gates before. Very neat.

[@SeanB88]

Very nice, Dave! I've built many clocks like that in my past too (usually using 74xx series though). I even built a few alarm clocks that actually had two different clocks (one to keep the time, the other to store the alarm time) and then a magnitude comparator to set an RS latch when the clock matched the alarm times.

[@benadams6332]

So when are you going to visit Obama? He must be super impressed you actually built a clock.

[@NonciclopediaForEver]

+Alfred Stampe You must really struggle with tying your shoes.

[@benadams6332]

+NonciclopediaForEver oh.. ad hominem .. always the best way to prove your point, or maybe not?

[@NonciclopediaForEver]

No, not at all. But then again, I'm not trying to prove any point, not to someone who doesn't understand which between discrimination and an insignificant pet project earned this kid his fifteen minutes of fame. Also, your father never loved you.

[@NonciclopediaForEver]

***** Oh, look another bright mind. "Bigotted"? Do you know the meaning of the word you're trying to use?

[@pepe6666]

man what you did with the hours/12 digit cycle is remarkable. this is a real beautiful clock. its really cool to see a clear example of using that 50hz power clock. heres hoping nobody changes it to 60hz.

[@CH_Pechiar]

Brilliant Dave. I have been waiting for this video since you showed us the clock long ago.

[@lawrencebillson6224]

Best video yet. Possibly the most educational thing I have watched. Ever.

[@HNedel]

Dave, what you seem to miss is that little Ahmed is NOT at all interested in electronics. He is interested in getting attention. I find it very hard to believe Ahmed will ever get to the point where he can build a clock like this one himself. Time will tell, now that he is a celebrity it should be pretty easy to follow his progress through life.

[@samworthick]

Kinda cool. Thanks for sharing. I think I will try start trying to design my own setup! The only point in making this for me would be to practice my knowledge after a digital design class.

[@williefleete]

I used a similar case for a multipurpose LED serial display I made, has a few PICAXE micros, one took in 8bytes of 4800b serial and controlled the LED displays via shift registers (ucn5841 eight of em to drive the displays, most expensive parts aside from the displays) the other took interrupts from an automotive analogue clock ticker coil drive output, rectified to get 1pps. It ran off a higher voltage so ran ok on 5 volts and was enough to trigger a micro's input without buffering. The code space was pretty small (256byte max) but I managed 24 hour, animated segment between hour and minute with 12 hour hourly beep with setting routines in the clock micro and on the display ~32 ASCII codes (bell,0-9 ":" A-U) controlling 64 segments and a beeper on 4 outputs and a serial input

[@timothyn4929]

Very comprehensive explanation. I has a love/hate relationship with digital logic in my first year at uni!

[@timothyn4929]

*had

[@EngineeringVignettes]

Still have my trays of CD4000's and 74-series IC's around somewhere. I miss the days when TV's and VCR's were actual parts goldmines. BTW Dave, that clock is _nobut bodge_ :)-

[@mjux89]

There wouldn't be a 12 problem if you used 0-23

[@Regular6782]

As far as I know here in Australia our power line frequency 50 Hz is actually maintained to be true over long periods of time specifically for this reason. I was told it was a requirement, but I am not sure how true that is.

[@pavelp80]

That's nice, especially diode logic circuits like not(not(a and b and c)). They almost deserve their own vlog as they are handy if someone wants to trigger one pin on microcontroller by three different signals (possibly some of them inverted)

[@MrNukKKT]

Dave, that's pretty amazing! I didn't even realize it was possible to do so much without a microcontroller. BTW, one of the things that confused me for half the video was that the reset pins on these chips are active-high instead of the more common active-low.

[@CassetteMaster]

I was given a custom-programmed clock that originally was Vishay LCt-104 web tension transmitter. He reprogrammed the EEPROM to make it a clock (it also uses a TIMEKEEPER RTC/RAM chip), which a start-up, displays a greeting, fireworks, and a sailing boat. During operation, the upper alphanumeric displays show time, while the alphanumeric displays below occasionally scroll Bible verses.

[@scarrypolpetta9006]

Really cool mod

[@paulstubbs7678]

Ripper use for an old device, that would probably otherwise just been chucked into the bin. (I ended up Googling LCt-104 for a looksee)

[@borthewolf3376]

My best clock is a broken clock. It is twice a day 100% exact. No other clock is that good!

[@oniruddhoalam2039]

Nice joke.

[@bertblankenstein3738]

I did a few projects like this. I was more of a 74xx ttl and 555 timer fanboy. 4xxx series cmos chips were not all that robust ( perhaps in my hands). That mains strain relief is still a lot better than nothing.

[@kevincozens6837]

Love the old school resistor diode OR and AND gates. I used some of that myself back in the mid 70's when I designed and built myself an 1802 based CPU board. Off the top of my head, you could have saved a few parts by using a PNP transistor instead of the extra diode and pair of transistors for the 6 detector reset circuit. If you didn't have PNP's back in the day (since you were using what you had at hand), it makes sense you used a pair of NPN transistors.

[@EcProjects]

That is a nice design! Good work with the diodes there. Thanks for sharing Dave!! :)

[@WobblycogsUk]

Brilliant video, just the sort of thing to get people interested in electronics.

[@DuanvantSlot]

Great video Dave! Thank you. Sigilent FAIL there at 15:10.

[@EEVblog]

+Duan van't Slot Not surprising actually, it would need reciprocal counting to get better precision due to the slow gating time. It shouldn't display all the digits though.

[@joyange1]

O-GOD! This brings back memories. I design and built a similar clock out out 74 series logic. except mine didn't have the 10th of a second count and you could not set the time ether. to set it at the right time. you would plug it into the wall at 1:00, because it started at 1:00 when you plug it in. I was 12 years old back in 1983 when i built this thing and I no longer have it anymore sadly.

[@abhijithanilkumar4959]

Builds digital clock when he was a teenager Grew up to invent a 32 channel logic analyser

[@ThatCuteMacaw]

You know that kid really didn't build a clock, he just took one apart and put all the guts in that pencil case. Still a bomb in my mind

[@RandyLott]

Ah, I miss the days where I would take junk TVs and VCRs, desolder the parts, and organize them into my bins for reuse.

[@yakacm]

I'm 50 years old and I have just discovered the 4026, just this last week-end I got 2x4026's connected to a double 7 seg display (a green one oh la la) and managed to get it to count up to 99 by sending it a signal from a 555 timer, I tried for ages to get the 555 to give me exactly 1 second, but could quite do it. I noticed you didn't use the mythical ungated "C" segment, which the data sheet hints can be used to for divide by 60 and divide by 12, but no one seems to know how to use it. Anyway as I said I fiddled with the 4026, 7 segment display and 555 for about 2 weeks before I got it to work correctly, mainly because at first I was trying to give the clock signal by using a tactile switch before using the 555, but ever time I had anything connected to the clock pin the 7 seg display would go haywire counting up very fast on it's own, which I guessed was like you said it was picking up noise, maybe something to do with the PSU I was using. Anyway It's very satisfying watching the green numbers count up to 99, in nearly 1 second increments.

[@CannonballCircuit]

hahah I love that Back to the Future reference!!!

[@TheEpicFailLP]

I REALLY want more videos like this

[@TheEPROM9]

The 4026 is what I have used for my VFD discreet logic clock. Due to the complexity of needing a multiplexer it turning into a design and build your own multiplexer project. So the multiplexer and display and PSU is the only part that has ever been completed. I should really Finnish the clock part and finally complete the project.

[@mrozu1337]

That bomb blew my mind.

[@blazeou812]

should do a now clock "Now that you seen how a built a clock in my youth this is how i would do it now after 40+ yrs of experience."

[@ZXRulezzz]

"what can I do with them, I know - make a clock!" Heh, I'm in almost the same situation right now. Got a nice case from old APC UPS, initially wanted to put the step-down transformer here, to get 100v from 220v for the Japanese record player. Then I thought "Hm, that case seems a bit too big for the transformer alone, and I don't want other extra components sitting around and making a bit of a mess". So now I'm building 4-channel stereo multiplexer (74HC4052) with 1 phono input (and 3 line inputs), separate line out, and built-in headphone amp, all that with digital controls powered by AVR. Just because I've got parts salvaged and just because I can :)

[@abhijithanilkumar4959]

Can't we also use the LOAD pin of the BCD counter IC (if it has one) to load a 1 to the first hour counter and and just CLEAR pin of the tens hour counter to get 01 after 12 ,by kind of decoding 12 ?

[@jpalm32]

The sister of the boy who brought a suspected hoax-bomb to his Texas high school said she was suspended from a school in a prior bomb scare. Her suspension occurred in 2009 while she was attending middle school in the same district.

[@maximilianmustermann8172]

This Video was explosively entertaining! :D

[@etechguy1009]

Now this is one hell of a homemade clock!

[@mikerobinson605]

801 awww takes me back love this vid love it

[@AttilaAsztalos]

Never seen segment drivers "throttled" by a single common resistor. That should change your luminosity based on how many segments are lit by changing the voltage drop over the resistor with the changing current. Might not be perceptible though on account of how LEDs seemingly magically emit the exact same amount of light for anything between 1-5mA... Of course we were too lazy to hook up 7 resistors per digit too in our day, but we used a number of series diodes instead of that resistor - they dropped 0.6V each (until the drivers / LEDs were happy) and didn't care at all about how many segments are lit...

[@MarkPalmer1000]

Someone should get Dave a HP 59309A lab clock for Christmas... now there is the epitome of classic digital clocks!

[@ian-c.01]

Absolutely loved this, thank Dave !

[@EEVblog]

+Ian Clarke No worries, glad you enjoyed it.

[@BarriosGroupie]

Wow, you were an electronics prodigy there Dave!

[@lichtsuchender]

Is this the equivalent for spaghetti code? ;)

[@DaveMcAnulty]

Best video in a while, more of this please!!

[@spoderman15]

Hey Dave, you ever thought about doing a mini-series on basic discrete logic (TTLs, cmos, 7400s, etc) design and projects? I guess I can stick to microcontrollers until I go to university, but this seems really interesting. Or if you know some good books or anything for beginners that'd be great

[@Hiraghm]

No, the next step for Ahmed was to add C4, or a load of fertilizer...