How to cascade the decade counter IC 4026 | Details of IC CD4026

In this video, I've explained how to cascade the decade counter IC 4026 and its pin 15 and pin 5. This is the second part of 4026 IC. In the first part, I've practically explained all the pin functions of IC 4026.
Digital Electronics videos (Logic gates, number systems, flip-flop, counters):
• Digital Electronics Th...
AND gate using only with Diode, video link:
• Diode AND Gate logic c...
How to connect current limiting resistors with 7 segment display:
• Should I connect one r...
This is the video link for the first part:
(CD4026 in detais)
• CD4026 | Basic things ...
Video link for pulse generating circuit:
• MOD 4 counter with CMO...
More about pulse generation with 555 IC (PWM):
• PWM signal generation ...
---------------------------------------------------------------------------------
Facebook:
/ digital.debajyoti
Instagram:
user name: digital.debajyoti
Link:
/ digital.debajyoti
------------------------------------------------------------------------------------------------
You want to support me to make more videos?
Support me through PayPal-
www.paypal.com...

[@ALEFILES]

Greetings from Argentina! Today, September 23, 2023, I subscribed to your channel!!! 😄

[@EEWave]

Welcome to my Channel ☺️☺️☺️

[@warrenmondon3375]

Thank you.Your methods and the way you teach are so elegant.I learnt so much in such a short time.My mind does not feel overcrowded. Please keep up the excellent work.

[@mathmaker6946]

dude, you are a great teacher!

[@EEWave]

Glad you think so!

[@markusallport1276]

Very well explained. Easy to follow and simple to understand. Thank you for this video, you explained this simply and perfectly.

[@Yelnats101]

its built!!!!!! i just got it done!!!! its going to hang on my wall and count away, i gotta get a battery backup for it,and i wont officially have it start counting till new years eve.i will do a video on it and explain it to people. i will also direct people to your channel so they can see exactly how to cascade.

[@EEWave]

Thank you 😊

[@naderhumood1199]

Great job brother...thank you so much ... Sending sluate from kingdom of Bahrain. ✌️🇧🇭

[@EEWave]

My pleasure

[@gerrymcerlean8432]

If you look at the 4026 datasheet you will see that it has been designed to directly drive a 7-segment LED display. So the current limiting resistors are not needed.

[@michealmyers4515]

Thanks mate

[@anokhautomation4453]

Great knowledge.thanks for sharing.

[@Yelnats101]

hey man, great video, im using what you did and building one that will count to 1 billion, it will take over 31 years to count that far btw

[@EEWave]

That is awesome!

[@AnthonyFrancisJones]

Excellent! Thanks for this! Great explanation very clearly laid out!

[@somasiriperumburiarachchig9628]

Thank you so much you are a great teacher Sir !

[@styrishrodrigues]

If you add a preset or pot in your ne555 astable circuit, you can control the speed of counter

[@abdullahalmasum6887]

Great!!! Very informative for beginners. Thanks sir!

[@EEWave]

Most welcome!

[@yashverma9678]

Nice video with excellent explanation. Kindly also make videos on controlling dual 7 segment display , triple 7 segment display and so on. Dual 7 segment display has 10 pins approx and triple seven segment display has 12 pins approx.

[@EEWave]

This kind of display needs microcontroller.

[@yashverma9678]

Ok which microcontroller and how to program it. If possible kindly make videos on that. Your all videos are very interesting and going on nicely. The way of explanation along with circuit diagrams and hardware connection in your previous videos is also excellent.

[@shahulhamid4770]

Nice explanations ! Thanks a lot Bro.

[@VDC48]

Thankyou for tho tutorial...👍👍👍

[@govindarajnarayanasamy8539]

Very good explanation Thank you

[@EEWave]

You are welcome

[@anokhautomation4453]

Wow. very very interested.

[@styrishrodrigues]

Should i use 220ohm resistor if i run this entire circuit on 3.7v battery?

[@ahamedahamed926]

Very good explaination liked very much sir if you can please show the circute diagram

[@EEWave]

Circuit diagram is in the video, please watch full video.

[@ganeshkumar-ce6kt]

Thanks❤

[@ponymoore6140]

Thank you

[@anirbanroysourov9490]

what if the input voltage is 5v and the voltage I'm giving to the reset pin is less than 5v. will it reset?

[@xtra_chz_plz]

Awesome video

[@EEWave]

Glad you enjoyed it

[@bbourgoin72]

Is there a down counter equivalent to make this circuit count down from a preset number?

[@bibinzacharias545]

Pls upload down counter 3digit

[@CarMachanical]

Thank you so much

[@abhijithanilkumar4959]

Hey bro Are you from India? If so from where do you buy ICs Amazon? I just want to know a reliable source for ICs in India

[@EEWave]

Yes, India 🇮🇳. I've bought these IC from Chennai, ritchie street. Some other offline sources are Kolkata, Delhi, Lajpat rai market. And obviously from Bangalore also.

[@abhijithanilkumar4959]

@@EEWave Thanks man

[@abhijithanilkumar4959]

@@EEWave Hey brother I can't go to any place and buy because of covid! Do you by chance know any online site where you can get these components Thanks... Ignore if you don't have much idea about that Don't wanna waste your time in that

[@EEWave]

I think Amazon is only online option.

[@abhijithanilkumar4959]

@@EEWave 👍

[@boybravo689]

Watching for the second time can you make a circuit of electronic score board sir tnx

[@styrishrodrigues]

HELP! My display is stuck at 000 and not increasing even if i give pulse

[@rubenmendez6065]

Can you do this with 5 Ic’s for 5 digital displays ?

[@boybravo689]

Sir supposed to be add one switch more to used for the two player in playing chess what would be the connection of the other switch tnx sir for the video more power to your channel

[@keshavmix]

Which IC to use for common anode 7 segment display?

[@mishavillanueva7191]

if i connect big segment display should i adjust the value of the resistor sir? what is the use of capacitor in this kind of project if add one??

[@ahamedahamed926]

Sir i have confusion of 1st IC pin no 1 should be connected to push botton after what should do I didnot understood so please reply sir

[@EEWave]

We provide clock pulses on the pin 1 of 1st ic. We take clock pulses from microcontroller, 555 ic pr any other ic. Here, I've shown with a push button switch. For more details, please watch "basic things of 4026 IC" video. I hope that video will help you.

[@junulhoqe384]

Pulse generating circuit is it astable Multivibrator?

[@jumbo999614]

I use 9v power supply for 555 and 5v for CD4026 counter. Can I connect them together by sharing ground? I afraid that wrong wiring will fry my IC chip.

[@EEWave]

No problem, you can connect 9v to CD4026 also.

[@luckysharma9484]

hi sir i make a celling fan winding machin , i want your help for a counter mitter with read magnetik switch and auto cut few no. using realy

[@georgelijichanayil7772]

Hai. bro 3digital counter circut .relay off please up load.waiting

[@ahamedahamed926]

You have not reply to me its ok friend any how i have made this counting meter with the help of your video and explaination I am thankfull to you very nice video it is very helpfull for me because i do fan winding work thankyou very much

[@EEWave]

I'm sorry bro for the late reply. Sometimes it is not possible to see all the comments. I tried to reply all of my viewers ASAP. By the way, I replied all of your questions.

[@ahamedahamed926]

Common anode or common cathode 7 segment display sir

[@EEWave]

These are all commom cathode display.

[@yashverma9678]

How to make counter that counts in backward direction?????

[@EEWave]

This IC, 4026 is only for forward direction. I've uploaded a video, "Basic things of IC 4029", this video is on forward and backward directions. Please watch that video.

[@boybravo689]

Sir may i know if you want to decrease the counts what configuration of the circuit to add tnx sir

[@EEWave]

Please watch my video about MOD 4 or MOD 6 or etc. I already uploaded many MOD (4, 6, 8, 10, 12, 24, 32, 60) circuits. You will get to how to design.

[@CarMachanical]

Hi bro i want table fan winding machine 3digit counter with motor auto cut off relay help me bro how make circuit

[@EEWave]

Ok bro, I will make a video on this.

[@CarMachanical]

Thank you bro 🙏💕 Waiting for updates 😔

[@luckysharma9484]

i wate youre vidio

[@luckysharma9484]

@@EEWave i wating your vidio

[@michealmyers4515]

Hi man Did you use a 9V battery for this while circuit?

[@EEWave]

No bro, I used 5v from my bench power supply.

[@michealmyers4515]

@@EEWave 👍

[@TeeTwoSalty]

hi can you make clock timer decade counter

[@EEWave]

If you provide 1Hz clock pulses to the circuit, then you will get clock timer decade counter. I've uploaded a video on how to make 100% accurate 1Hz clock frequency. Please watch that video.

[@abhijeetparida8911]

What is current required this circuit

[@eripe2818]

5volt

[@gerrymcerlean8432]

@@eripe2818 Volts are not 'current. Current is Amps.

[@robertscott501]

Instead of putting a 220 ohm resistor on each counter output, is there a reason you are not putting that resistor instead on the cathode of the seven segment display? Seems to me that would be the same effect using fewer components- a common cathode for seven segments times three is three resistors on three cathodes, where you are using 21 resistors on the anode side of the circuit. Is there a reason you cannot lower the voltage for the seven segment display that way? Is there a reason you cannot put a single 220 ohm resistor in between all three common cathodes and ground? I see this on youtube... a lot. And I have read that it's incorrect, unless you have a reason it needs to be that way- things like different numbers of LEDS driven in sequence, or a mixture of LEDs with different voltages, stuff like that. Full disclosure: I am still learning, and I am not personally familiar with the counter IC you are using, which is why I am asking... this is a good faith question, please take it at face value.

[@EEWave]

Admirable question, loved it. I'll make a video on this with full explanations.

[@robertscott501]

@@EEWave Thanks for taking the time to reply to my question- I will be checking out that video when you post it at some point in the future.

[@EEWave]

Hello bro, I've uploaded a video on this topic. Link in the description below. I hope you'll enjoy it.

[@Sarahbuildsstepsequencers]

Your videos are so enjoyable. I love your channel! Maybe you will take a look at my channel and see if you like it.

[@user-ii9es7pi7s]

Pl. Rectify anode and cathode concept. Must appreciate but Rectify anode and cathode. Wrong guidance. A...C, n....p