Effortless Furniture Building: How to Use the Tapered Tenon Tool

3D Printed tapered tenon jig. Printed in PLA, designed in rhino/grasshopper.
STL's: ussadesign.com/products/tenon-tool
Featured Projects:
Router Lifter 3.0: • How to Build Router Li...
Drill Guide: • AutoAngle Drill Guide ...
Multifunctional Bench: • DIY Easiest Multifunct... v
Instagram: / ussa_design
Patreon page: / ussa
3d printers used :
FLsun V400:flsun3d.com/products/flsun-v400
FLsun Super Racer (SR)printer:amzn.to/3If0KxT
Artillery Sidewinder X1: amzn.to/318pRvN
Artillery Sidewinder X2:amzn.to/3jWt8LL
Camera gear:
Camera: amzn.to/3tOKV6K
Camera lens: amzn.to/3cbLSAa
Second monitor: amzn.to/3tO3pUZ
Microphone: amzn.to/3fbALZM
Lights: amzn.to/3sfYWdm
#woodworkingprojects
#DIYwoodworking
#innovativedesign
#handmadetools

[@Swarm509]

Cool product! 3D printing makes perfect sense for this, and I'll have to grab the files. I have been building a lot of simple stools and thinking about getting a tapered tenon tool for the legs instead of doing it all by hand with a spokeshave. I agree with others that a reamer would be a perfect companion to this tool, it makes for a great joint if you can have the tenon and hole the same angle!

[@joshuathorson8813]

It's a giant pencil sharpener. And that's okay.

[@theobolt250]

Dang! Beat everybody to the punch with this one. 😂😂

[@__--JY-Moe--__]

🤓

[@PureBloodWNC]

And it’s cool! I wish I was this creative. My brain just doesn’t work like this.

[@FrankTranDesign]

Beat me to it lol

[@Adrian_Galilea]

FML you are a genius. Well fucking done, again.

[@deiterwakes1907]

Wow, you made the death star of drill guides. Nice job, Very impressive.

[@harizferati]

Duuude i liked your 3D Print and Woodworking skills but than i saw you Rhino and Grasshopper Skills at the end of the Video

[@lolcec81]

Комментарий в поддержку канала и ролика, а также труда мастера.

[@weekendcarpenter5330]

In addition to this tool, would be nice to develop Tap and Die Wood Threading Set for making Wooden Threads

[@Swarm509]

That would be amazing, most tools for this are quite expensive (although work quite well).

[@themightyowl]

Your stuff is always amazing

[@duncanflindle3722]

Brilliant! Have you considered making a reamer to match the 6 degree taper for that style of joint? I was trying to think how that could be done with 3d print and not be too fragile. Great work!

[@Superwoodputtie]

This is briliant

[@madforit9661]

Truly talented

[@Polkilo]

That's sooooo cool!! 😀👍👍

[@IppiopaidFEEDBACK]

Nice work.

[@CallmeSam00]

I get best results when I design for the specific material I intend to use for the part. Resin parts tend to look quite different from PLA parts. Looks like your design workflow is optimized for extrusion printing, so I'm not surprised your resin part had some minor mechanical issues.

[@woodyahh2110]

I like it 👍🏻👍🏻

[@joshalbert8510]

What about putting the blade in a cartridge so it could move between units? Also this looks vey close to a dowel maker.

[@tri339090]

Great design, try using a high torque low speed drill when attempting to add machine power. Also it would be amazing to see an actual pencil sharpener that has the ability to cut various tip angles.

[@mickleblade]

Sds drill would work

[@bdeconcept383]

I just found out about your channel, very interestng to see that you use grasshopper !

[@ktkprinting5809]

good❤👍

[@fabricemenoud3296]

Fallait y penser 👏

[@lvikng57]

I was just about to make one of these, are you reading my mind

[@a0abes]

curious what software were you using for the design? I'm familiar with Fusion 360 (and the ancient sketcher)... but yours seems... different?

[@Justin-fb7ni]

is that just depth stop at the beginning?

[@GuyH77]

Love your videos. What are the inserts you use in the prints? Thanks.

[@CLAUDIUIOANCIREBEA]

you can find them under different names as example: Furniture Screw In Nut, Threaded Wood Inserts, Bolt Fastener Connector Hex Socket

[@GuyH77]

@@CLAUDIUIOANCIREBEA Thank you

[@Justin-fb7ni]

I am trying to get the hardware needed for this. for the threaded insert, it says 'm6x8x10'. What does each number stand for? edit: nevermind I found somewhere that says it's: diameter, thread, length.

[@davidjunior1966]

Você envia um desses para o Brasil ?

[@Justin-fb7ni]

great stuff. i just wish you could explain things

[@cbgrand]

Hi bro, what is the name of the software that you use to design / draw?

[@kostkagarcia112]

He uses Rhinoceros + Grasshopper (its in the description)

[@cbgrand]

@@kostkagarcia112 Thanks i didn't see

[@WillowLavender]

Yr gonna wanna remove the protective blue foil from your Wash & Cure‘d reflector. It‘s not doing a lot of reflecting as is :p

[@WillowLavender]

Awesome design tho!

[@minkyutekken]

연필 까기 어디서 구하나요

[@user-ql8eg7zq2c]

ваша ссылка на сайт заблокирована....

[@What_Other_Hobbies]

RIP drill.

[@miaotai]

3min ago