EGN Mini Skid Steer Eg360T

  Рет қаралды 2,484

RaffertyLand&TreeLLC

RaffertyLand&TreeLLC

Күн бұрын

Пікірлер: 24
@OMEN2022
@OMEN2022 9 күн бұрын
Thanks for the video. I'm currently looking into one of these for small home projects.
@lilydavenport4568
@lilydavenport4568 10 күн бұрын
Yo thx for replying! Ok great. We just got the agt ysrt14 and it’s been surprisingly awesome so far!
@Raffertylandscaping
@Raffertylandscaping 10 күн бұрын
@@lilydavenport4568 mint! They're definitely handy little machines
@BalxiesGoldAdventures
@BalxiesGoldAdventures Ай бұрын
Get mine next week, can't wait, thanks for the video it's a great help just to prep.
@Raffertylandscaping
@Raffertylandscaping Ай бұрын
@@BalxiesGoldAdventures thanks for watching!
@shantyburton6854
@shantyburton6854 Ай бұрын
Alot of these Chinese skid steers share a lot of the same tech. Verify that your fan is blowing out through the top cover and not the back into the engine bay. Itys very hot when you really work it. Especially on my left thigh. I haven't changed the rotation on my fan, but for winter use (Michigan), i will be putting in a direction switch to change the fan blowing out in the summer and on me in the winter. I also had a leak on my left hydraulic input for the ram, bad craftsmanship. Just used a brand new o-ring to seal it. One other thing. on that rear sprocket at the bottom, not the drive one, watch for blow outs or take the tracks off and re-grease those bearings (2x per side). I love mine, and have used it extensively. No attachments yet. Oil change, grease and checking bolts for tight ness was the only maintenance i've done. Changed the hydro fluid too.
@Raffertylandscaping
@Raffertylandscaping Ай бұрын
@@shantyburton6854 thank you I will check those things you pointed out! I have not ran it long enough to have the fan come on yet, about an hour each time I run it. But I will find out
@toddfix7936
@toddfix7936 Ай бұрын
Great video, thanks for making this!
@Raffertylandscaping
@Raffertylandscaping Ай бұрын
@@toddfix7936 thank you for the feedback!
@lindian55
@lindian55 Ай бұрын
Thanks for your detailed intro on that machine. I just bought the same model and will be picking it up next week so your video answered a lot of my questions. I am curious about the 360T compared to the 360 and wonder what the T represents
@Raffertylandscaping
@Raffertylandscaping Ай бұрын
@@lindian55 you got it! Thanks for the comment. Besides getting new fuel into the bowl and checking the oil. Should be ready to go until the first service!
@robloxplayer-bu1it
@robloxplayer-bu1it Ай бұрын
I believe the t is for triple pump and without t it's dual pump
@Raffertylandscaping
@Raffertylandscaping Ай бұрын
@@robloxplayer-bu1it I'm pretty sure it's a double pump but I will look again
@USMC-Sniper-0137
@USMC-Sniper-0137 Ай бұрын
My TYPHON STOMP is on it's way from California! to Florida!
@leeczaplinski9781
@leeczaplinski9781 Ай бұрын
I've been seeing comments on another site that shows the idler wheel bearings have no grease.Worth checking b/c the other owner only got 22 hours before they failed.
@Raffertylandscaping
@Raffertylandscaping Ай бұрын
@@leeczaplinski9781 I will have to check that, thank you!
@johnbayliss1098
@johnbayliss1098 18 күн бұрын
I would love to know where you got it and the horsepower on that and the lifting power if possible
@Raffertylandscaping
@Raffertylandscaping 17 күн бұрын
@@johnbayliss1098 I got it at a local auction near me. But I had to bid on it, online. It is 420cc, or 13.5 horsepower. It will lift about 500lbs with out counterweights. With counterweights should be 850lbs lifting capacity.
@scottburgle2169
@scottburgle2169 12 күн бұрын
i think that one looks like the 12.5 hp model . Others have a 23 hp. Not sure why you'd need 23hp with a single stage hydraulic pump?
@lilydavenport4568
@lilydavenport4568 13 күн бұрын
Can you move the bucket and the tracks at the same time or do you have to be stopped to move the bucket?
@Raffertylandscaping
@Raffertylandscaping 13 күн бұрын
@@lilydavenport4568 you can but if you are driving, that track that shares the function with bucket is slowed significantly
@leeczaplinski9781
@leeczaplinski9781 Ай бұрын
Can you address tread adjustment and tread tension on your next video. I have the exact machine.
@Raffertylandscaping
@Raffertylandscaping Ай бұрын
@@leeczaplinski9781 I haven't looked into that yet, seeing as the tracks don't appear lose. But I will have to check! I think it's a threaded rod with a stopper, hopefully
Chinese Skid-steer ISSUES!
12:39
Colin Parker
Рет қаралды 11 М.
Forestry Mulcher for the Mini Skid Steer
14:42
metaspencer
Рет қаралды 18 М.
She wanted to set me up #shorts by Tsuriki Show
0:56
Tsuriki Show
Рет қаралды 8 МЛН
Жездуха 41-серия
36:26
Million Show
Рет қаралды 5 МЛН
The Lost World: Living Room Edition
0:46
Daniel LaBelle
Рет қаралды 27 МЛН
Inside the Mini Skid Steer Factory - Who Makes Them?
17:33
Our Life In Trees
Рет қаралды 14 М.
Chinese Mini Excavator and Track Loader, Disaster Or Blessing?
7:51
Professor Gadget
Рет қаралды 1,1 М.
Is a SNOW ROLLER, better than a SNOWBLOWER ?
17:44
Viny B
Рет қаралды 798 М.
Testing the auger attachment on my Chinese mini skid steer
6:33
Doc of all Trades
Рет қаралды 7 М.
Chinese Mini Skid Steer  Spool Valve Fix / Joystick Upgrade (CRT-23)
24:22
Buying and Testing Kubota Mini Skid-Steer Grapple
10:33
Part-Time Diggin
Рет қаралды 3,9 М.
Counterweights = Best upgrade for Chinese mini skid.
12:58
Fixing the cheapest Chinese wheel loader Fland FL45
49:00
Abrams Excavating
Рет қаралды 116 М.