Egress Window Installation on an existing foundation

This is the step by step process of installing an egress window with a window well on an existing block foundation. This is a job we completed in central Illinois in the past 2 weeks. If you enjoy concrete constuction and snow removal please subscribe to our channel. We have new content as soon as a project is completed.

[@getitn651]

Wished I would’ve watch this before I let the company we used do it. It was a total Sh!t show, our downstairs flooded 🤦🏾‍♂️

[@quik-n-ezconcretecreations9013]

Sorry for your bad luck. Glad we could help.

[@easth-lr2gt]

How did let this happen?

[@scientist100]

if it floods, normally you have too much water sitting around the house, use gutter extenders to keep water away from those egresses. I have 6 of them and I had bad gutters, I replaced them and now they concentrate on one of the corners which tend to let water in when it rains like crazy, I live in Indiana and it will make its away around the housing from under the gravel and will start to flood until it reaches the window and will leak into from the windows. I used a 12 feet gutter fall tube and it minimized the flooding by probably 90%, rare occasions it will fill up and leak into my basement, the permanent cure is to make a box of waterproof concrete instead of the plastic or metal housing that will enable water intrusion.

[@MNCasaPro]

So glad I fast forwarded to find out the actual installation wasn't going to be shown. That would have been a long 18 minutes.

[@brandonbrown5166]

Thanks lol

[@lukeyna1]

Thanks for the help. Renting one today. This will persuade most folks to hire a pro.

[@quik-n-ezconcretecreations9013]

Thanks for watching and good luck on your installation.

[@anthonyquintana739]

Thank you for the video it very helpful , I own a small window company in Denver Co. I am always getiing calls to install egress windows but i never done it before so i know im missing out on a great opportunity. I just purchased a dump trailer also too haul of dirt , so thats a start .

[@quik-n-ezconcretecreations9013]

That's awesome news. It's becoming a great niche to get into. I think once you get the cutting done it will be second nature on your window install with your background. Good Luck. Thanks for watching.

[@fishbonenetworks]

I would have never inset my egress window if not for your video. Thanks!

[@quik-n-ezconcretecreations9013]

You are welcome. Thanks for watching.

[@craignorwood2355]

Wow! It only took a little over two weeks to complete! Wholly crap! Getten right after it waisting no time. Customer must be pinching their selves saying it can't be true like some kind of crazy dream has taken over their life. I always find that the first weeks are the most stressful then after that the weeks that follow are better although filled with awkward silence and passive aggressive tension everyone starts feeling more like family and around Christmas there is always hope and happiness.

[@quik-n-ezconcretecreations9013]

It took 2 days not 2 weeks. Lol

[@GoldsConcrete]

We remember the days when we did these all the time, now we just excavate the entire crawlspace into a basement haha

[@chaddirks5822]

I liked the video! It gave me a very good idea how this is done

[@quik-n-ezconcretecreations9013]

Thanks. I'm glad it helped you.

[@spiccolirocks3580]

Great video, enjoyed the process! Great job, very professional!

[@quik-n-ezconcretecreations9013]

Thank you on the awesome review. We are happy to hear you enjoyed the video.

[@TylerNieves-ty7ns]

Awesome work!! Nothing like spinning a demosaw in a wall you guys got a new subscriber

[@quik-n-ezconcretecreations9013]

Thanks for watching and subscribing.

[@craignorwood2355]

Yeah, nothing like spinning a diamond saw blade in a thick concrete wall and a real healthy dose of concrete dust filling the air for 5 or 6 hours. Gotta love it knowing you did it yourself and at the end of the day knowing that no matter what everyone will have no doubt you are not fucking around but instead going big and leaving the evidence behind that says you put in a full day's work. Yeah maybe its gonna take some serious time and money to clean up that seventy or eighty pounds of pure crystalyn silica spread though out the home but at least there's probably only a few weeks left and that's when the real progress starts to take shape.

[@treelife365]

9:00 - Your play-by-play commentary is awesome! "... and he's SNEEZING!" I expected you to say next, "He shoots, he scores!"

[@quik-n-ezconcretecreations9013]

Thank you man. I appreciate the great comment. I should have said that.

[@michaelhaze4507]

Hey I’ve been doing this for some years now kinda afraid never used glasses but I’m worried I must as eye injuries are scary as heck but how can you with that slurry always being a problem kinda got me scared what’s your input

[@gordsinclair9583]

Great Video.....I'm glad I found this one!

[@JS-mx3he]

Big job nor for do it yourself...window you may be able to do but the cutting digging special saw...gravel need a pro..great work..

[@hlneira]

Hi guys, Just curious on couple of things I didnt see couple of things , 1, foundation has no water proofing system, 2 i didnt see you guys install a drain for the window? and I also didnt see a Steel Lintel installed above the opening? any specific reason for this

[@frankdicasmirro7614]

Does any know of this type of saw..looks best type of saw to cut strsihht and thru..one side only..great tool..please advise..

[@kerryclark1926]

What about structural support?? You took out a chunk of foundation. Did you install a header with vertical supports on either side?

[@quik-n-ezconcretecreations9013]

The seal plate along with the 2×6 frame we install for the window supports that short distance.

[@glennmiller7850]

Inspectors are mostly of no help on this subject, and never give clear cut answers. I'm no professional, structural engineer. But...I'm pretty sure if the joists run perpendicular, and bear weight onto the wall in which you are cutting, there no doubt needs to be a structural header. If they run parallel, I'm pretty sure it won't be required to have a structural header. If they run parallel to your cut, I would actually just sister another parallel joist in there to be safe and call it a day, then frame out the window opening as per usual.

[@johnh9748]

​@@glennmiller7850 You are absolutely correct. This is NOT the way to install ANY egress of any kind. There are several code failures in this install. The header is not only REQUIRED for structural support, but it is also required for fire rating. This egress will likely not even open after that sill plate moves a little. Even internal doors in non-load-bearing walls require a header over them. Let's be honest, the guy removing the blocks had no idea what the tie down was. I just hope no one needs that egress a year from now.

[@zanimal4u]

They have a structural engineer on-call, like I do. For anything that requires a larger width.. The engineer has to sign off for the permit to even be issued.. Or to pass an inspection.

[@rogersamaniego7392]

Great work!!

[@quik-n-ezconcretecreations9013]

Thank you. Thanks for watching the video.

[@michaelhaze4507]

I'm new to the business what's more Ideal Gas or electric? great content btw.

[@MustPassTruck]

Do you put a header over the window?

[@chuckmunch3627]

Nice vid! Wish I could've worked with my Dad...

[@michaelmccue3287]

with a ring saw and mini excavator would you bet that youll finish it fully in one day ?

[@davondd]

Wow this is amazing fellas

[@quik-n-ezconcretecreations9013]

Thanks.

[@keytothegate68]

OK but I never understood how can a 2x4 hold the weight of the house once you remove the foundation blocks?

[@MNCasaPro]

What do you use for sealant between the green treated and the block?? Thanks for the video :)

[@quik-n-ezconcretecreations9013]

We use an outdoor window caulk.

[@josegarcia-th3pj]

How do you know there's not going to be damage to the structural foundation

[@CarPhonix]

You were right that dog just doesn’t shut the fuuuuck up!!!

[@youtubecomments9732]

😂😂😂

[@malcmmm]

What is the widest window opening that you are allowed to cut?

[@mopar2513]

E&S Concrete Coring and Sawing Company LLC… give us a holler .. we cut concrete all day every day! $500 a pop !!!

[@AjKakar-y6k]

Nice job

[@jjjjpppp2330]

I nail on a 2x4 to keep cut straight

[@billanjum2933]

Did you put a weeping tile for drainage??

[@frankdicasmirro7614]

Can you repeat the type of saw used to cut thru the cement wall..i like to posdibly buy one..thks..any info on saw nsme and place to buy..

[@quik-n-ezconcretecreations9013]

It's a cut and break saw by Husqvarna. Here is a link. www.husqvarnacp.com/us/machines/power-cutters/k-760-cut-n-break/967195701/

[@oregawn5099]

Is there a lintel and if so can you show and explain it

[@dannyniblett6174]

very informative thanks

[@quik-n-ezconcretecreations9013]

Thanks for watching

[@timmullen678]

I’ve watched several videos about installing egress windows in basement I have seen no one address the problem of brick veneer or bearing walls you need to install a steel lentil if the wall is brick veneer and you need to install some type of header system if the floor joists bearing.

[@quik-n-ezconcretecreations9013]

Unfortunately I do not have that situation on film yet. When I do I will upload it.

[@rodneyparkssr.5483]

Can you install a egress window with a brick exterior?

[@JuneD-rb2ou]

What is the clean up is like inside the room?

[@quik-n-ezconcretecreations9013]

Very minimal if you tape it up real well with plastic.

[@EricvandenBurg]

Nice video and explanation, but what about security when is he going to get deaf?

[@quik-n-ezconcretecreations9013]

He has internal ear plugs in. The window locks from the inside.

[@psych007]

great video; curious why you did not add a lintel?

[@quik-n-ezconcretecreations9013]

In this particular situation it did not warrant one.

[@louishollandjr]

What if you have Driveway on either side of Home. And no widows in Back of the house?

[@quik-n-ezconcretecreations9013]

You will have to install the window on the back of the house. You will just have more cutting to do.

[@stevewolff7187]

I was hoping to see how you attached the window well to the block wall. What type of anchors do you use? I have 2 of these to put in at my cabin.

[@quik-n-ezconcretecreations9013]

We use on block walls 1/4" x 2" tapcons with a fender washer. 2 per side minimum. On poured concrete walls 1/4" × 3" tapcon with fender washer.

[@jasonvivian9770]

i need to do something similar but no need to dig soil. How long did it take to cut the concrete? minimum egress window for a fire escape is 20"x24

[@quik-n-ezconcretecreations9013]

On average it takes a couple hours to cut the wall. Thanks for watching.

[@tylermathewson2324]

what was quoted for this project and did you stay on budget?

[@quik-n-ezconcretecreations9013]

The quote was $3,500.00 total for materials and labor. We stayed right on budget. Thanks for watching.

[@stevenmoua2110]

@@quik-n-ezconcretecreations9013 very reasonable. I wished you were in PA

[@JS-mx3he]

That's good price...

[@timmullen678]

I used the double cut and break for 2 - 4x4 windows. You need to make sure you are absolutely straight when you cut. I had cut through 9” Steal reinforced Concrete. If the cut starts to get out of straight then the saw will fight the the cut and make it very hard to cut through.

[@filter315]

How long did it take you to cut each window with that type of saw? I'm going to cut a 32x36

[@timmullen678]

@@filter315 maybe 6-8 hr per widow the cut is actually 4”9x4”9 did not include removing the cutout.

[@ЮрийФильмов]

Молодцы.

[@michaelhaze4507]

going into business, my goal is compleating every job 1 day start to finish,via mini ex /ring saw would it work out 3K profit in a day LMK egress windows

[@rdani86rd]

Concrete chain saw is the best for this

[@quik-n-ezconcretecreations9013]

That's a great point. We don't own one and no one rents one around here. We rent the cut and break saw because it's available. Thanks for watching and the great comment.

[@Bluuplanet]

We used a "Partner Saw". ...basically a chainsaw motor with a 18" or 20" circular diamond blade instead of a chain bar.

[@mariecook7912]

How much does this cost?

[@eddyont1]

lol look at the dogs at 2.44 lol getting done Hahahaha

[@tashtant]

Where's the drain?

[@mrbeagie8550]

Where are u located? I need this done on my house

[@quik-n-ezconcretecreations9013]

Central Illinois

[@Ladysimpel]

The window is well done but !! The grid would have fallen out according to standard even smaller so that small animals do not fall in there, if necessary, a network would have been attached to the safety!

[@hotrodsrx]

Dang I'm wanting to do this but I'm about 2.5 hrs away from your location.

[@quik-n-ezconcretecreations9013]

Where are you located?

[@hotrodsrx]

61375

[@ek6063]

Can you recommend anyone in the Chicagoland area?

[@quik-n-ezconcretecreations9013]

I do not know anybody in that area. Sorry. Do some investigating and you should be able to find someone capable of installing an egress window.

[@JesusOrtiz-ce2wc]

630 398 2916 Jesus free estimate

[@rickduncan362]

Did you add any drainage in the hole?

[@quik-n-ezconcretecreations9013]

We backfilled inside the window well and behind it with 5/8" septic gravel for drainage. We also installed a plastic cover to keep the majority of the rain out. Thanks for watching the video.

[@rickduncan362]

@@quik-n-ezconcretecreations9013 I wrote my question before I saw the lid you put on. Pretty nice

[@quik-n-ezconcretecreations9013]

@@rickduncan362thanks.

[@sniperlegacy0653]

Whats the name of cutter

[@quik-n-ezconcretecreations9013]

www.contractorsdirect.com/Husqvarna-Cut-n-Break-Diamond-Blade

[@nightstarking]

Cut sizes please and size of window exact measurements?

[@quik-n-ezconcretecreations9013]

Depends on the size of basement window you pick up from your concrete contractor warehouse. We measure the window and add 4" for the width. This accounts for the 2x6 on each side which are 1.5" thick plus 1/2" wiggle room to make sure it fits. The height is the same adding 4" to the overall window height measurement. Hope this answers your question. Thanks for watching.

[@nightstarking]

@@quik-n-ezconcretecreations9013 yes it does thanks

[@Itsnotmyname1172]

Level first

[@ronaldison1380]

Where can I get the corrugated steel well and what size is that in the video?

[@quik-n-ezconcretecreations9013]

We bought it at a concrete supply company named in Stetson in Decatur, il.

[@ronaldison1380]

Quik-N-Ez Concrete Creations thanks...is that 48x36x60 window well?

[@AW-yv9sq]

Nope....I would packed up or have them put the dogs in

[@terrasonhunt6534]

I like timelapse videos better. You just showed us the after product, and not any of the in between really.

[@johnmahland363]

Funny intro

[@iyeska8948]

Should of dug two feet deeper and droppe the block in the hole

[@DerekThorpe294]

No eye OR ear protection during cutting? Terrible idea. That's how you lose and eye and go deaf by 40. Good explanation otherwise.

[@quik-n-ezconcretecreations9013]

Yes my brother was not consistently wearing eye protection, but he had ear plugs in. I appreciate you watching our video and comments. Subscribe we will have more videos in weeks to come.

[@mikej8745]

Annnd He sneezes!

[@brandonbrown5166]

I like how you say the dogs are so intelligent yet they don’t approach the fence that’s off. I would think it would be a sign of intelligence if they realized it’s off. The pavlovian response is not a sign of intelligence lol.

[@rickkingkorn]

Ok with the damn dog already.....

[@vuelvancaras1]

Cuantos habitantes new york

[@matthewneufer1758]

Dude edit the dog bark

[@edbtzkhud]

Who the hell uses cinder blocks as foundation for a house?

[@quik-n-ezconcretecreations9013]

Houses built in the midwest prior to 1950 were using concrete blocks for foundations. I might have used the term cinder, but should have said concrete blocks. There are still crawlspace and room additions installed today with concrete block. Once some concrete contractors in the area [my grandpa being one] bought wall forms everybody in the late 60's and 70's switched over to poured walls. Thanks for watching.

[@edbtzkhud]

Quik-N-Ez Concrete Creations I live in the Midwest and own a home built in 1949 it used limestone for foundation. I’ve never seen cinder block. Those are cinder blocks not concrete blocks as you say.

[@quik-n-ezconcretecreations9013]

@@edbtzkhud I appreciate your enthusiasm, but I've been in thousands of basements in the last 25 years in central Illinois. This was the main component used for foundations prior to the 50's. Sorry if your confused with my experience, but every region does something different. I appreciate you watching the video.

[@larrymbs]

Seriously?

[@so4real]

Lassi isn't helping lol

[@ramaporiver803]

Wtf is with that dog there

[@jjjjpppp2330]

Does he have cancer now

[@MeganSmith-iz3uw]

hmm