EH0 EHO fault code AEG Electrolux Lavamat Easy Repair Fix

EH0 EHO fault code AEG Electrolux lavamat easy repair. This video shows how to fix EH0 EHO fault code.
EH0 - mean is a problem with the power supply ,
also i found that could need changing the 3 relays , i will make soon a video
I found that almost all AEG Electrolux appliances can be repaired just by unplugging and plugging back the appliance in to power supply. Or just connect it to different power supply.

[@BScXTerminator]

Nice fix 👍 I did it in less than 5 min, and now start just like normal 😀 Thank you for an easy and simple video 👍👍👍

[@parskold5952]

Worked like a charm for me. Problem was intermittent and hard to understand. Thought it was overheating or thermometer first but disconnected the overheatercontrol. The same problem... So I cleaned it good and now it works... I had to do it properly thou. Removed it, airblew it, electral board cleander and Isopropanol on connectors...

[@user-lw8vh9ez3i]

Поздравления и благодарности за видеото. Радвам се че хора от България са направили собствен канал с такава насоченост, успех и все повече видеа да правите .

[@blackops_disclosure_act7904]

It dose work. worked for me. read the description. I unplugged all the connecters and cleaned the contacts, though they looked clean, I still cleaned them with cotton and saliva. It fixed it!

[@fanterusk43]

Worked like a charm! Thanks dude

[@mindispenner3323]

Thank you! We are going to try!

[@NabilKarsheh]

Thank you I will test it tomorrow

[@NabilKarsheh]

Thank you, as promised here is my feedback: it worked perfectly!

[@NabilKarsheh]

Sorry it worked only temporary. The technician says the control panel has IC error and can not be repaired :(

[@DooMTrooperO]

Thank you, man!

[@user-gg8jt2lz6q]

Did work for me 👍🏻 Thanks

[@roberttaylor5880]

I will try this on my daughter in laws dryer on Tuesday The same model with the same code

[@AwwYeaNah]

Will try this on my dryer. Was hard to understand video though needs to be more pre thought out.

[@BarryKellysinger]

Thanks

[@samwikiwiki3231]

V.good keep on.....but I need help How 2 find wiring circuit diagram for pcb... Not manual service......it's useless....

[@mubashirghumman6414]

Company: Electrolux Model: EWF 12732 this problem is eH0 error plz tell me this suletion

[@pavlinnonov3505]

what About for error code E60 ?

[@borispopov5156]

That's a thermostat error. In case of non heat pump dryer just change the white thermostat on the heating element on the back.

[@nikolaymitev5229]

Опитах и не стана .всичко е чисто.Може ли друга идея

[@pavlinnonov3505]

Error code 505 ?? what can tell for this code?

[@ivelinyovchev7853]

There are not such a code 505. Maybe F05

[@pavlinnonov3505]

@@ivelinyovchev7853 Yes Sorry it was error F05 .......

[@ivelinyovchev7853]

@@pavlinnonov3505 F05 is something wrong with your Pcb control board

[@joancampana]

It just worked for 5 min then came back. 😔

[@chch6953]

Ne, dont work!

[@tchong5424]

It should be the problem in the main board, usually switching capacitor or starter capacitor for the motor.

[@cimbanp]

fake, cleaning do not help

[@dadadada-qh6vr]

Fake

[@parskold5952]

No, worked like a charm for me.