EIGRP Fundamentals | Cisco CCNA 200-301

[@AbhishekRaj-ju9cc]

Keith I took my CCNA yesterday thank you for all your content and the motivation couldn't have done with out you. Thank you

[@Brody961]

I'm about to schedule mine as well. Any chance you have any tips that you'd like to share?

[@Vow2525]

@@Brody961 Definitely do videos, labs and CCNA official guide as main reading. And lots and lots of practice tests.

[@KeithBarker]

Congratulations Abhishek Raj!❗ So happy for you! Onward and upward. What is next for you?

[@SakshiKumari-lc5wb]

Can u give us some tips

[@ravipillay3381]

I have taken my CCNA on 30/11/2023 , couldn't have done with out you. thank you Keith

[@KeithBarker]

Congratulations @ravipillay3381❗ So great to hear, way to get it done. Best wishes on your continued success.

[@tkanazirtkanazir6034]

I was able to take my CCNP thanks to Keith Barker. MANY THANKS.

[@ChadwickVonGriffindorIII]

Hi Keith, so I had as gentleman (name I don't recall) called me recently from a Florida number saying they worked with CBT, presumably from interest that I showed in CBT. That's fine, but his sales pitch was that the CCNA is "a really hard test". I can't say much more as I was half awake when the call started, but if this person was legit, I'm glad you're here showing us how to do it, rather than lecturing about how hard it is.

[@KeithBarker]

Thank you Gary Pemberton!

[@grahammccann8554]

Hi Keith, Great video, thank you for all your helpful video.

[@KeithBarker]

Thank you graham Mccann!

[@mmmm-gs4mc]

Thank you Keith appreciate all your affords, I whish I could come to America and Thank you face to face

[@mrcantonese]

That's great Keith. Completing the lab was fun and really helped to embed the concepts. Thank you.

[@KeithBarker]

Thank you Michael Richardson for working on that lab! Hands on practice is one of the best ways to build your skills, and get better. Thank you!

[@joekoury4260]

Most of the videos helped a bit but I think this video pushed me over the ccna passing line as its on the test but not really in the books for the current ccna. Thanks slothful one

[@Vow2525]

That's is hilarious, although I passed my CCNA this week, but was definitely surprised with multiple questions on EIGRP.

[@KeithBarker]

Thank you Eugene Khavinson, and congratulations on your CCNA❗ What is next for you?

[@Vow2525]

@@KeithBarker Thanks next goal is Junos and then CCNP Enterprise, Devnet and learning all the automation stuff.

[@rudydd5277]

Great explanation as usual from a great mentor. Thanks OGIT Keith

[@KeithBarker]

Glad you liked it!

[@mouthbreather0034]

thank u keith for always explaining like a boss. and that pacman ghost lamp it's amazing! im going to buy myself one

[@rodaltaltamz9757]

Thanks keith. Nice tutorial. Help me a lot! Keep up the good work.

[@KeithBarker]

Happy to help!

[@markfuentes3666]

LOve it. Downloaded PK file. i feel i learned alot. Thanks again.

[@ovehansen7111]

Best EIGRP basic I have found :-) ...

[@KeithBarker]

Thank you Ove Hansen!

[@behzadkhayam4956]

Excellent explanation, Thank you Keith

[@KeithBarker]

Glad it was helpful!

[@jorgesoletario2307]

great run through on how routers delay accumulation. I even not aware of this when i was studying eigrp before :). Now i know. thanks keith

[@KeithBarker]

Glad it was helpful!

[@jasdavis75]

Excellent video as always Keith. Love your training.

[@KeithBarker]

Thanks 👍

[@EA-fb7ug]

Thank you Keith

[@ryanrrothwell]

thanks Keith

[@raughboy188]

Speaking of eigrp fundamentals eigrp supports both equal and unequal load balancing, when configuring eigrp on router autonomous system number must match on every interface included in eigrp, also there are 5 K values in eigrpp and all of them must match everywhere and last but not least algorithm used for caluclations by eigrp is called DUAL. What i wrote is small part regarding eigrp there is much more and some things are bit tougher to understand. OSPF on the other hand doesn't care for AS number at all.

[@NsahTheIdealist]

Since EIGRP is a hybrid routing protocol, can it be registered as a number?

[@raughboy188]

@@NsahTheIdealist eigrp isn't hybrid routing protocol. I never heard of that.

[@NsahTheIdealist]

@@raughboy188 i think so, because it has both features of link state and distance vector

[@raughboy188]

@@NsahTheIdealist it has features of both but it doesn't make eigrp hybrid protocol. Eigrp is distance vector protocol, ospf is link state protocol. Eigrp is also cisco's proprietary protocol so you can only use it on cisco's devices.

[@NsahTheIdealist]

@raughboy188 kzbin.info/www/bejne/rIiQdqSEj9irZrMsi=6q653euolGnNWDPO 🤔🤔 Some sources like this one got me

[@PaulEllisBIGDATA]

I take the exam at the end of the month with your help I am SURE I will pass. Then going for ccnp 350 701.

[@KeithBarker]

Way to commit Paul! You've got this.

[@KelvinTran]

Good luck on SCOR!

[@Sniezkodi]

Is there a route in the table to that Puddles t shirt? Nice.

[@ranjanadissanayaka5390]

hey, Keith thanks for this video...

[@KeithBarker]

Happy to do it, thanks for the feedback Ranjana Dissanayaka.

[@lgcompanyclips]

Keith, where is the a link on how to use Wireshark with Packet Tracer? that's awesome!

[@abdelouhabchalal9730]

Hello Keith, is it possible to explain us how the router calculate the metric using BW and Delay.

[@KelvinTran]

There's a well-known formula for it, assuming you're using the default K1-K5 values (1 0 1 0 0). If you Google it, you should be able to find it.

[@KeithBarker]

www.cisco.com/c/en/us/support/docs/ip/enhanced-interior-gateway-routing-protocol-eigrp/16406-eigrp-toc.html#anc6

[@surelb]

thank you this helped a lot

[@ZVLOG28]

thank you sir.

[@KeithBarker]

Welcome!!

[@kenookula1425]

Hi Keith. Please how do you connect your packet tracer to Wireshark?

[@r_c_h_d7409]

can you make a lab actually configuring EIGRP? I get the concept but want to see the actual config process with ya.

[@brandonbradley7060]

Yet EIGRP still isn't on the CCNA playlist in CBT Nuggets

[@vikaasrs7933]

Hello Keith, Could you let me know if there was a way to use Wireshark to to analyze packets within Cisco Packet tracer. As I am aware of, GNS3 has that option to use Wireshark for Packet capture and analysis, but I am not sure hot to integrate Packet tracer and Wireshark. Please do share how to do so.

[@OutJoke]

About to start Cisco at college, I'm 16 and kinda nervous.

[@The_GrumpyGills]

I'm 28 with 4 years working experience and I'm just now getting my certs. You are doing great.

[@adamlovescats]

when i learned ccna at college some of the topics were very confusing to grasp at the beginning, seriously, don't be afraid to youtube an explanation or watch a video for a topic. keith and plenty of other youtubers have so many videos that're informative and explain things very clearly. i found that online resources helped me fill in the areas of knowledge that i failed to gain while learning from the professors. keith also has a discord channel that's full of plenty of knowledgeable people who are more than willing to help with questions. good luck man and you got this

[@OutJoke]

@@adamlovescats Thanks alot guys for the encouragement! 😁 Now i'm excited.

[@sebastianmontoya4736]

I started studying CCNA when I was 16 in high school, but I made a mistake and it was that I only studied to pass the high school exams, so I didn't learn enough for the certification examen at that moment I will recommend you to start studying hard now for your certification so you can have it as soon as possible!!

[@bangelina13]

thanks as always

[@KeithBarker]

My pleasure!

[@rishabhtomar7071]

Great video keith, love from india. BTW which screen annotation software you use in your videos?

[@KeithBarker]

Thank you Rishabh Tomar! I use epic pen.

[@anthonysmith9847]

Keith, How quickly will Cisco be adding support for the 9000 series devices to Packet Tracer?

[@KeithBarker]

Thank you for the question Anthony Smith. I don't know their time table.

[@annedwards7688]

Keith I use packet tracer got.a reset server connected error how can I correct that error

[@KeithBarker]

Thank you for the question ann Edwards. Make sure you have the latest version of packet tracer, from Netacad.com

[@CorazonDeCristoCano]

Does the bandwidth command actually shape traffic to that level on the interface or does the interface still operate at 1 Gbps and only report 64 Kbps for routing metric and QoS calculations?

[@KeithBarker]

Thank you for the question C Cano. The bandwidth statement does nothing on its own, but can be used to inform, including for QoS and routing.

[@chili5238]

Is this your background Chroma (green surface) or real devices?

[@KeithBarker]

Thank you for the question Chili. That is my real studio/office in the background.

[@mrguaranteed]

Is it okay if i am 100% confused still after watching this 3 times?

[@The_GrumpyGills]

What are you confused about my friend?

[@KeithBarker]

If this is the first exposure to EIGRP, and you are wanting to understand it better, hit me up on Discord with a direct message, and I would be happy to chat with you to explain it a bit more, so that you will feel more comfortable with it. Hope to see you on Discord. Link is in the video description.

[@tomatordia8448]

Cool

[@sreejith_jinachandran]

Sir I need your help to build an amazing Resume/CV.

[@KeithBarker]

Check this out: www.indeed.com/career-advice/resumes-cover-letters/how-to-make-a-resume-with-examples

[@leothalion3983]

...

[@sreejith_jinachandran]

@@KeithBarker Sir I have 5 years of experience in the field. I'm not telling I'm the best. I'm not getting the salary which I'm expecting!!!!!😌

[@konradwerner4134]

18:53 will R4 get it ...the message about the worst bw, message going the other way.....IM ASSUMING IT WILL but i want to confirm

[@KeithBarker]

Thank you for the question @konradwerner4134. Starting at the network in question, the routers advertising that route will propagate the worst bandwidth in the path. If there are 5 routers in the path, and the middle router has a bandwidth of 64K, the last router in the path (furthest from the target network) will receive that 64K information as well.

[@Rishabh4876]

Now I don't like surprises

[@KeithBarker]

Thank you Kabir Singh! EIGRP is now "NOT" one of the surprises you will face.

[@zuliano05]

Why the Delay Field is set to infinity in a Query when a link has failed. ???

[@abdelsattarsaad1128]

بيدو بيدعيلك

[@UniQueLyEviL]

Is increasing the delay on an interface the same as or similar to padding? Update: Nevermind I don’t think it is.