Einscan Pro 2X Training Guide | UMAX.com

[@1969Irishdave]

Thanks for the video. That music though 😢

[@umax2639]

You're welcome!

[@JohnRichards-ie9dt]

how do you prevent the scanner from scanning in the surface that your object is laying on?

[@umax2639]

There are two ways: 1, you can use a black cloth as the surface that your object is laying on, usually if the brightness setting is not too low, the scanner won't capture the black cloth while you're scanning your object. 2, If the surface is not black color, you still can scan the object as usual and of course the scanner will capture the both object and the bottom surface. And then you can use "Cutting plan" tool to locate the unwanted surface and remove it. Cutting plan is a useful tool which you can find it from the bottom tool bar in the ExScan scanning software.

[@kucingkesayangan7]

why when I calibrate white balance does my 3D scanner doestn’t work? But when i calibrate step 1 - step 5 it’s work?

[@umax2639]

White balance is for the scanner with Color camera only. When your scanner is attached the Color camera, you will redo the whole calibration. You can't simply do white balance alone. You will start from step 1~5 and then white balance in order to complete the whole calibration process.