EKEDALEN extendable table from IKEA assembly guide

[@mariapandele5586]

Thank you for the video! I actually used it to repack the table and send it back (some issues, I am getting a replacement). Had no memory of how each part was packed and your unboxing video is nicely comprehensive!

[@th3blogger]

Hi. Thanks for watching and good luck with the next package

[@Eric-kg5mh]

Can’t thank you enough for this video!!! Would have been lost without it.

[@th3blogger]

You're welcome.. thanks for watching.. don't forget to subscribe 😉 🙏

[@kenstat1]

Great job. 1000% better than the instruction booklet. Thank you

[@th3blogger]

You're welcome.. thanks for watching

[@karinagonzales6685]

Love this table! I just purchased it today and building was a breeze. Heavy table, looks great, I picked the dark brown color.

[@th3blogger]

Thanks for watching.. 👍

[@mariannejohansen5086]

Thank you for posting this video!!! 🙏 Got stuck on point 9 in the assembly manual as I couldn't make out whether the two little pieces on the right should align or be slightly lower than the two longer traverse pieces! (hard to explain 🙄).. But watching your video helped me through it!! Terrific!! - also since these days it's a HASSLE getting through to IKEA customer service!! Thank god for helpful people like yourself!! 😇👏👏🎉✨

[@th3blogger]

I'm so happy that my video helped you. Thank you for watching .. Please do not forget to subscribe .. I wish you a good day

[@LMM777-biker]

Thank you so much for this video, it actually saved me. I was about to give up and it worked perfectly

[@th3blogger]

You're very welcome 👍 thanks for watching 🙏

[@jeffhalbo96]

Excellent video - very helpful and comprehensive. Thank you.

[@th3blogger]

You're welcome, thanks for watching 👍

[@marathonkev]

Very well done! I'm planning to buy this table and this video will make the assembly go a lot smoother! Thank you!

[@th3blogger]

You're welcome. Thanks for watching..

[@seanmarkey4076]

Ours is due Monday, this will help when putting together, thank you for uploading.

[@th3blogger]

You're welcome.. good luck

[@emilybeeman2629]

when I need help with the most random shit the internet is there for me thank you KZbinr th3blogger

[@zhenchen8109]

Ikea needs to pay you for this!!!

[@th3blogger]

I hope that hhhhh . Thank you very much

[@addiea20]

thank you so much for the tutorial i got to put back the extension as i had no idea how to put it back ;)

[@th3blogger]

You're welcome.. thanks for watching. Please don't forget to subscribe. Thank you

[@akirami1]

thanks for showing how to remove the extra piece

[@hubertleurquin5134]

Thank you. Usefull!

[@th3blogger]

you're very welcome 👍 thanks for watching 📺 please don't forget to subscribe 🙏

[@sumalbell]

Thanks for the video, it was very helpful 👍🏼 👍🏼

[@th3blogger]

You're welcome.. thanks for watching 👍

[@celinagolo]

Thanks for the instructional video. It was very helpful when I was putting together my table.

[@th3blogger]

You're welcome.. Thanks for watching..

[@rinber13]

Thanks! I just wanted to see if it's possible to build without power tools. I assembled a bedframe yesterday and it was a real struggle.

[@th3blogger]

you're very welcome 👍 thanks for watching 🤝 please don't forget to subscribe 🙏

[@johnhowarth3662]

sorted out problem at no 1 and well on the way!!

[@th3blogger]

Good luck and thanks for watching.. sorry to be late

[@manhaltoma3269]

Thanks so much it’s really helpful 🙏👏

[@th3blogger]

You're welcome.. thanks for watching

[@joannemackown5572]

Well done!

[@th3blogger]

Thank you 👍 thanks for watching 📺 please don't forget to subscribe 🙏

[@Tourism43]

Very nice, I liked it very much

[@th3blogger]

Thank you very much .

[@thomashuang9159]

We are stuck around 16:02, where some of the long screws we can screw in and tighten but one or two just wouldn't go in no matter what. I suppose what we would need to do is remove the side piece in question and see if it's properly positioned. Thanks!

[@th3blogger]

Sometimes you have to go back to solve problems. And your idea is good. And watch the video again from the beginning to know the error

[@gameclips5734]

that's because the metal rail is in the way of the screw holes, i had this issue as well and this video is different as there aren't 3 long screw holes on each end

[@darrylchai4523]

Hi I am facing this problem as well :( How did you guys end up overcoming this?

[@chessmanwriter12]

I'm having the same problem

[@stephanedoe4896]

Thank you very good video

[@th3blogger]

You're welcome.. thanks for watching..

[@sa-li112]

Merci bcp excellente vidéo très bien expliquée👍👍👍

[@th3blogger]

Avec plaisir.. Merci d'avoir regarder la vidéo

[@raniayoussouf857]

Thank you very much👌🏾🤗

[@th3blogger]

You're welcome.. thanks for watching

[@carmencorzod7532]

Muchas gracias ha sido muy útil. Thank u, very helpful.

[@th3blogger]

You're welcome.. please don't forget to subscribe.. thanks for watching

[@빠나낫-h3k]

Thank you soooo much for this video👍🏼👍🏼

[@th3blogger]

You're welcome.. thanks for watching..

[@sarapimentaclaro]

A life saver! Thanks!!!

[@th3blogger]

You're welcome .. thanks for watching

[@BlueNaros]

You save my life 💞💞

[@th3blogger]

You're welcome.. please don't forget to subscribe .. thank you

[@salignary]

Perfect thanks 👍

[@th3blogger]

You're welcome.. thanks for watching 👍

[@littlenewton6]

amazing, 我决定购买一个白色的同款桌子！谢谢你的视频

[@th3blogger]

You're welcome.. thanks for watching

[@johnhowarth3662]

Good afternoon, I am at step one and screwing the 8 bolts in!! vDo i screw them right in as i am frightened i will go through the table? Many thanks John

[@gertjan1710]

I just did a table today and yes You screw them right in until they are even with the surface I wondered about the same thing I reckon you know that by now since its 2 months

[@JuzzyUK]

Can this table be stained with food? That's what I am worried about

[@th3blogger]

If you plan to use it for eating, it is better to cover it with a tablecloth to keep it or with a transparent tablecloth.

[@JuzzyUK]

@@th3blogger yes for everyday use. Thank you. I think I am better off getting a 190cm length?

[@webdigo]

I didnt get any screwdriver with my ekedalen 😢

[@theplackemeier]

I'm having the same problem several others have described. I've completed assembly and the extension piece won't sit into its place. The two small square wooden pieces are catching on the edge of the table. At least now I know I didn't do anything wrong - I just need to fiddle with it more

[@keeyanho]

Thank you very much for your very good and helpful video. I have decided not to buy this table because the table legs are 'moved' to extend the table. Over time this will weaken the leg attachments to the table and cause the legs to wobble. For a table, the legs must be very strongly and rigidly attached to the table top and in this design, this is good only in the initial period of use; it will not last long. Thank you again for your video.

[@glyphdoctor]

Having just put together an Ekdalen table today, I just wanted to say I think the way the legs are attached this may not be the case. There is a metal piece with two holes in it that goes into the top of each leg, and a hole through the wood to attach two screws without heads into that. Then a bolt is used to attach that to the metal brackets at the corner of the table. In other words, the legs are entirely attached to the tabletop using metal parts, so it isn't like screws into wood that are going to come lose with movement.

[@jessica-zi6ui]

Thanks 😊

[@th3blogger]

You're welcome.. please don't forget to subscribe.. thanks for watching

[@Michael20]

any experience the extension piece not fitting their table in the last step? The two wooden square block supports from 26:36 are hitting the edge of the table and preventing it to sit flush.

[@theplackemeier]

I'm having the same problem right now!

[@parischambers2328]

Great video and will come in handy when I assemble ours. Can I ask what size the rug is you have used under the table?

[@th3blogger]

Thank you. For the rug, IKEA AVSIKTLIG 133x195 cm (4' 4"x6' 5")

[@kakilebam]

Is it possible, to mix oak top with white leg table?

[@th3blogger]

I do not think so. at the top of the table there are holes for screws and table legs

[@kakilebam]

@@th3blogger i mean from the same designer. I just want to change color of tabletop..

[@th3blogger]

technically this is possible, because the top of the table comes in a separate package, provided IKEA accepts this 👍. if not you have to buy the two colors, and mix them 😉

[@hungtrinh83]

Anyone can tell me the quality of this table please? Planning to buy one in Oct. Thank you

[@th3blogger]

Materials Table top/ Extension leaf: Particleboard, Ash veneer, Acrylic paint, Solid ash Underframe: Solid birch, Solid pine, Ash veneer, Acrylic paint Leg: Solid birch, Ash veneer, Acrylic paint I am satisfied..

[@lez2672]

Merci

[@th3blogger]

Avec plaisir.. merci pour le passage..

[@h.lu7]

Thanks for the review. Would water marks be left on it? I'm curious about its durability.

[@th3blogger]

Hi. You should know that this table is made of wood and its surface is made of particleboard. Not like other cardboard tables. at this moment, over than one year and half . It's ok.

[@h.lu7]

@@th3blogger thanks for the quick response!

[@th3blogger]

You're welcome.. please don't forget to subscribe 👍. Thank you

[@DataVisioLab]

good job !

[@relache23]

Thanks!!!

[@th3blogger]

You're welcome.. 👍

[@mingzhaoxie6538]

Hi, plan to buy this table, but is it safe after expanded? I am just afraid if guest sits in the left or right side, and push down the edge little bit, then the middle part flies..

[@th3blogger]

Hi. in 27:44 you can see that we have fixed the extra part with the table. Be sure it is stable.

[@luanamenezes6769]

Thank u

[@th3blogger]

You're welcome.. thanks for watching

[@harisht4783]

Please let us know your latest usage experience. I am planning to buy the same model

[@th3blogger]

Hi. to be honest,i never extendable the table yet. i use it with 4 chairs. it's strong and good for my daily using. just cover it

[@mnfahmy77]

Bravo

[@gummiluv]

Is this table better than the ikea bjursta extending table? Im not sure which to get. I like that the legs remain on the outside when extended with this table, but like the extension on the other one.

[@th3blogger]

Hi. I don't know about BJURSTA. But this one i like it.

[@Erica-Bear]

How long does it take on average to complete ?

[@th3blogger]

2 to 3 hours. not counting the stops and the filming time

[@Erica-Bear]

th3blogger thank you!

[@celinagolo]

It took me about 4 hours to put together the table. I like to lay out all the pieces and verify that I have the correct number of pieces. I suggest using a regular sized screwdriver since it doesn’t hurt your hands as much.

[@glyphdoctor]

I just put one together today. I didn't time it but I would say about 3 to 3.5 hours.

[@barackashtari3748]

Thanks

[@th3blogger]

You're welcome 👍

[@emilgavra5411]

Dankeschön

[@th3blogger]

You're welcome 🌹. Thanks for watching . Please don't forget to subscribe 👍

[@roberthardy5171]

interesting music choice...

[@shaydlens]

What are the dimensions of the table without the extension?

[@th3blogger]

120cm x 80cm

[@Nikita-TS]

70x80

[@fabiosaintot246]

merci bien

[@ethio4us23]

With out this video it would happen thann you

[@th3blogger]

You're welcome, thanks for watching 👍

[@Arnys1000]

man... we used to make parts for this.

[@SreeramReddyB]

long assembly task, I am not impressed with this product.

[@finlay1702]

How big is it before

[@th3blogger]

Did you mean the packaging size ? Packages: 2 EKEDALEN This product has multiple packages. Width:86 cm Height:5 cm Length:131 cm Weight:20.48 kg Package(s): 1 Width:38 cm Height:9 cm Length:106 cm Weight:14.40 kg

[@finlay1702]

th3blogger I mean before u extend

[@sheenadias]

120cm

[@chantalcompagnot4910]

thank you ..!!

[@th3blogger]

You're welcome..

[@eduardafranco5236]

Can you come live with me?

[@th3blogger]

Hhhhh maybe another life... but now just follow the video.. 👍

[@ОлегОлег-т8н9к]

Стол с разбухающимися ножками

[@spamandkimchi]

Thanks for uploading this! I just built mine (color brown) and the extendable part wasn't sitting in. Watched your vid and seemed like I built it correctly and turns out I just have to press it in more forcefully 😅

[@th3blogger]

You're welcome.. thanks for watching... 👍

[@theplackemeier]

I just assembled one and am having this same problem!

[@mariamalshamsi721]

👍👍👍👏👏👏👏🌺

[@topotoshka]

I don’t want this table anymore 😂 Too much bolts...

[@th3blogger]

Oh yeah 👍 but useful.. just follow the videos ..

[@topotoshka]

@@th3blogger to tell the true, I bought it already. I’m sitting here in the hall on the boxes and crying watching your video 😂 Thank you for your precious help 🤍

[@th3blogger]

Good luck 👍 . please don't forget to subscribe.. have a good day

[@topotoshka]

I DID IT!!!!!! Thank you soooo much!!!

[@topotoshka]

Now the problem is to turn the table over by myself 😂😂

[@dermorpheus]

Toller Tisch. Aber 16 mal Werbung.gehts noch. Besser wäre jede Minute Daumen nach unten.

[@SantiagoOrtabanoche]

dann guck es nicht, du Schlauberger

[@dermorpheus]

@@SantiagoOrtabanoche ja komm geh wieder in deine Höhle.gibt genug andere die sowas nicht nötig haben. Troll dich.

[@SantiagoOrtabanoche]

@@dermorpheus heul leise 🤫

[@dermorpheus]

@@SantiagoOrtabanoche nur kloppies hier. Komm hartz hier nicht rum.....Danke.

[@dermorpheus]

@@SantiagoOrtabanoche und schon bist du härter blockiert.danke für deine Ergüsse

[@denhezcat9173]

Pas de ralloges ,pas de tiroirs pas très pratique lorsqu il y a des invitées de derniere minute

[@ilenelattimer8724]

Wrong instructions

[@mertbatmaz2981]

Why? Can you eloborate a little bit?

[@kretekdukun6681]

Das Video ist Schmutz