horsepowerlogic.com send us stuff: horsepower logic 587 105th ave n unit 21 royal palm beach, FL 33411
Пікірлер: 98
@andy3474953 ай бұрын
I bet you're right about the power gain from the headers being down low. it would have been nice to see the whole curve from the dyno test.
@fabris49202 жыл бұрын
No better way to end the day with a video from you brother . Love from Toronto
@jordanwidelitz80932 жыл бұрын
Hope you are doing well Jack . Good to see you !
@TR.Pixels2 жыл бұрын
You should look into importing a Holden Ute in the future, it's pretty much a modern El Camino with LS or even a Buick 3800 (depending what year). Personal favourites are VS utes and VE utes.
@WhuDhat2 жыл бұрын
There is a company that imports the bodies, hoonigan went through them for the one they built a while back
@jdsbuilt96512 жыл бұрын
You can import vn vp vg vs now which a 5.0 and or 3.8
@colesteven11232 жыл бұрын
3800 is the supercharged v6 they put i the Buick regal GS here in the states right?
@TR.Pixels2 жыл бұрын
@@colesteven1123 Yes,it's naturally aspirated here in AU
@user-iy6zn2 жыл бұрын
an AU falcon would be better ;)
@OwlChapino2 жыл бұрын
Just commenting as I go, but the long tubes sound great! Also nice to see some moderate muscle on the dyno 💪
@looking_332 жыл бұрын
I’m kind of hooked on this series. Something different. 👍
@JackCecil2 жыл бұрын
Thank you!
@bartobuilt26012 жыл бұрын
The results on my old cutlass were very similar after long tubes. the intake cam and valve train upgrades it was Killer.
@therealboofighter2 жыл бұрын
Nice to see the gains, now for a new set of heads!
@JackCecil2 жыл бұрын
Hell yea!
@eddyf95592 жыл бұрын
I bought those same headers for my Caballero Diablo. Just haven't had time to install them. You have a real clean ride. I love the look with those wheels.
@JackCecil2 жыл бұрын
Thank you!
@6gendj5842 жыл бұрын
Love this car..i just bought a 79 same color
@carlosal18862 жыл бұрын
Nice work,my 305 was fun with some no2
@xXCigarXx2 жыл бұрын
Nice,I was wondering when we would get a video about the headers.
@erickcontreras1512 жыл бұрын
Awesome video!! 🤘🏻🤘🏻
@scrilla23762 жыл бұрын
Damn Jack that 305 barks now
@JackCecil2 жыл бұрын
Not bad right?!
@AITCH.2 жыл бұрын
Love the elco bro got one of my own ! It’s a 84 and I’ve been looking for a Someone who would build up the 305 while they got it.
@bigphatty52982 жыл бұрын
Great videos man
@JackCecil2 жыл бұрын
Thank you!
@sixesand9s562 жыл бұрын
I'm loving the step by step upgrade and test videos. The 305s have 58cc heads with 8.5:1 CR right? Vortec heads would be a nice cheap upgrade but they have some where around 64cc chambers.
@JackCecil2 жыл бұрын
Yea the vortex heads are a good upgrade. Trick flow makes a killer head also. I’d love to have those.
@BigHeadBourbon2 жыл бұрын
nice gains so far on just a few humble parts
@JackCecil2 жыл бұрын
That’s the idea. Easy and budget friendly.
@billskalicky5400 Жыл бұрын
Stock 5.0 fox body mustangs were around 175 hp at the wheels so you are on track.
@sote-z77762 жыл бұрын
i really like this
@julioorozco66353 ай бұрын
Hello, thank you for showing this video . I have a 1984 el camino with a/c. I followed you recommendation and purchased these headers.I couldn't do it 20 minutes like you guys (Lol) did. I have a problem and I hope you can help. The bracket that is behind the A/C compressor (that bolts to the head) ,I can't bolt it back because it hits the first tube of the header(driver side) . What did you do to overcome this? Did you cut the right side of the bracket to clear the first tube? Thank you in advance!
@MollyDogsm2 жыл бұрын
Love these basic mods to a basic factory engine. The horsepower figures aren't huge but the 0-60 is really decent. With better tyres and and cooler weather I bet you'd be down at 6.5 seconds.
@JackCecil2 жыл бұрын
Cooler weather is on the way! Let’s see what she does.
@learningwithmela84386 ай бұрын
Well those fit on my 403 Buick LeSabre?
@Chevyshow Жыл бұрын
🔥🔥🔥
@chuckswhip2 жыл бұрын
I hope the Buick t type is strapped on the lift !!!! Back end I’d now heavier then the front!!!
@calebdavis4752 Жыл бұрын
Where did you get the dual snorkel breather?
@sbcdime12 жыл бұрын
I love what you're doing with this series but i really think it would be cool to see how cheap it can also be to do a junkyard 350 swap after you have reached the end of the 305 stuff just to see the difference in potential with an extra 45 cubes. Like everything you put into the 305 swap over to a junkyard 350. I know for a fact in my case i was able to make 300hp with a 350 that i had a total of $600 invested into it including the cost of the engine.
@sbcdime12 жыл бұрын
I could have made more than that but it was my daily driver at the time so i also wanted decent street manners. So i opted for a mild cam and sprayed it with a 125 shot at the track the 300hp was no spray btw
@chettojeffrey2 ай бұрын
Was the ac bracket a problem at all ?
@Skormzee2 жыл бұрын
Would love to see a good tuner trial a throttle body efi kit like the holly sniper or edelbrok version etc
@JackCecil2 жыл бұрын
I’d love to.
@natepitchford69682 жыл бұрын
I’d be curious what a valvespring/decent cam upgrade would do to the 305. Get her to rev to 6000
@JackCecil2 жыл бұрын
Me too!
@colegilbert34392 жыл бұрын
@@JackCecil would be cool to do more budget mods like a summit cam shaft etc
@RyanBooth32 жыл бұрын
If you’re doing springs, may as well do 1.6 rockers as well. It should be a small enough change to not completely trip the computer up.
@JackCecil2 жыл бұрын
The computer dies very little. As long as the sensors are there we should be good.
@mK-lw4pi Жыл бұрын
Was the rest of the exhaust custom made?
@OwlChapino2 жыл бұрын
Damn, Jack uploading that late night snack lol
@JackCecil2 жыл бұрын
I started uploading at 6pm. My internet at home is horrible.
@OwlChapino2 жыл бұрын
@@JackCecil Damn, KZbin is slacking...I'm in the same time zone but didn't get the notification til 10 pm.
@James-sir2 жыл бұрын
She might look better a little lower I’m more of the Monte Carlo SS or the Cutlas with the rally sports and the beauty rings but those wheels match the elcamino that you have on em it needs a little low
@timothycooper19652 жыл бұрын
What’s the sbc engine you have
@Se7enthsonSS Жыл бұрын
How hard was it to put them in? Did you go from top or bottom??
@jmyd832 жыл бұрын
👍
@James-sir2 жыл бұрын
You have to keep going what was a oem upgrade back then can you use the Buick turbo or something?
@JackCecil2 жыл бұрын
Lots of options. These Classics are way overlooked.
@TM-jt3dd2 жыл бұрын
A nice 150 shot she whould be gunnin
@Chevyshow2 жыл бұрын
Stall up to 3k then launch. Might drop a sec
@300zxdriver2 жыл бұрын
Need to stop some of that wheel spin on the take off. Lower air pressure maybe and or pre..burn out before run. Might gain a couple tenths.
@JackCecil2 жыл бұрын
Yea it’s going faster don’t worry! 😉
@danielbass63482 жыл бұрын
You should do heads and cam with efi
@JackCecil2 жыл бұрын
It would definitely be good!
@oscarvillarreal89512 жыл бұрын
Are those headers still good? Have you seen or felt any defects?
@JackCecil2 жыл бұрын
So far so good!
@oscarvillarreal89512 жыл бұрын
@@JackCecil I'm thinking of buying that brand on long tubes. Do they scrape the ground on your car and are they really hot?
@OwlChapino2 жыл бұрын
I wish so badly you could tune my dad's 69 Camaro lol it would have so much more potential with your guidance. He sold the 489 that was in it (from when he used it as a drag car) and put in a 5.3 for it to be kept alive on the street because who the fuck can keep up with a drag car lol It's far too expensive. It rips as is but it needs a Jack tune.
@300zxdriver2 жыл бұрын
Jack it looks like your just stomping the gas from a idle on your 0- 60 pulls. Why aren’t you foot braking it to get rpm up to 2000- 2500 stall before leaving? That’s has to make a difference.
@brandonfloyd63212 жыл бұрын
What ever happened to the rzr project? Took back apart?
@JackCecil2 жыл бұрын
It’s sitting in the shop. I can’t find anyone local that can help with the bearing issue.
@hyper85452 жыл бұрын
Those 305s can get built up nicely my uncles made 490 hp with a few holly bolt ons
@budbeardmctoken74952 жыл бұрын
I'd pay to see that dyno sheet. 490 from a basic bolt on 305 is extremely hard to believe. Maybe with a power adder.
@TM-jt3dd2 жыл бұрын
@@budbeardmctoken7495 yes very dont believe that I think someone fibbing to the kid ..maybe with a 200 shot 🤔
@sanriosenpai35692 жыл бұрын
Yea well my dads brother, uncle’s best friend his dads 305 made 700hp with full holly bolt ons.
@hokirwinsor87752 жыл бұрын
Na ah my cousins brothers sisters boyfriend's uncle has a 305 with 850whp full bolt ons.
@gixxernut80212 жыл бұрын
Jack buddy I think your money would be well spent on a 383 bottom end and a set of trick flow heads and you will see the big difference in performance !! Easiest way to get where you want to be!!
@JackCecil2 жыл бұрын
I like the 305 though! I wanna see what it’s fully capable of with a stock short block.
@gixxernut80212 жыл бұрын
@@JackCecil just trying to help I just see the wizard keep being let down by a 305 I been there! If you enjoy it that’s all that matters buddy!!
@Maakyuhlinsky2 жыл бұрын
@@gixxernut8021 Jack's whole intention in the last 5 vids is to show that you don't need to throw power at a car to get it to go quicker.
@gixxernut80212 жыл бұрын
@@Maakyuhlinsky I understand that . just hate seeing the wizard so disappointed . when he is doing all the rite things. cause everything he is doing are the rite things!! But I’ve been thru it with the 305 and it’s just a real dog of a engine!! I’m just trying to help no disrespect it’s his car if he wants to put a scooter motor on it none of my business!!
@xXCigarXx2 жыл бұрын
@@gixxernut8021 yeah,the whole point is its underpowered and he thought it would be fun to upgrade step by step and see what happens. I think it's a great series and shows some valuable lessons along the way. Keep it up Jack. You are right at the cusp. Let's see how far the ol girl can go!
@terrypickette1182 жыл бұрын
- 👍 👍 🔧 -
@timaustin1102 жыл бұрын
Needs a small cam 😁👍
@JackCecil2 жыл бұрын
I agree!
@sandrooliveira4582 жыл бұрын
Waiting for a manual swap
@JackCecil2 жыл бұрын
I’m not too sure we will do a manual.
@blaznmax88772 жыл бұрын
Dude that this says ss on it where's the big block .. let's go