Electric Fishing Knot Tying Tool - Tie FG Knot Pretty Easy and Fast [4K]

In this video I'm gonna show you how you can easily tie two lines together with FG knot using electric fishing knot tying tool.
Electric Fishing Knot Tying Tool: amzn.to/2T14bkN
PISCIFUN Waterproof Cover Fishing Tackle Backpack With 4 Trays: shrsl.com/40a2z
Camera Used To Make The Video: GoPro HERO9 Black - amzn.to/2YmPBTA
Lights Used: amzn.to/3LSXLNC
You can also find lots of valuable information related to different fish species at: www.fishmadpro.com/
In my videos I test different fishing gadgets that are available on the market (Amazon and not only) so that you could decide for yourself if you actually need one or not. The majority of them do not have the instruction on how to use them and it can be very frustrating when you don't know how to use the tool you've just purchased or are planning to buy...
Fishmadpro is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed for sites to earn advertising fees by advertising and linking to amazon.com, myhabit.com, endless.com and any other website affiliated with Amazon Service LLC Associated Program.

[@maaifoediedelarey4335]

This is in fact a PR Bobbin knot. The device is effectively the electronic version of the manual bobbin. It does seem to work well ! Thanks for posting it !

[@muscletone08]

Unfortuneately this is NOT an FG knot

[@billbfjvgjj8867]

I was about to say the same thing .

[@TheBentarm]

I'm not sure about the knot but I like your presentation style, well done. One thing, it's a half hitch, not a half inch. 😊

[@fishmadpro7210]

🎣👍

[@pjc71]

It’s a PR knot but bravo on the demonstration and presentation.

[@AMPLEDOCK]

@@TheBentarm actually it’s not even a half hitch it’s a full hitch 👍

[@pedroodairpintopinto2409]

GOSTEI MUITO PRATICO E EFICIENTE ! OK

[@alexandergrey5913]

Love this gadget!

[@donb3557]

Another unbiased and informative presentation👍

[@fishmadpro7210]

Thx Don!👍

[@samuelkirk6074]

This is a big Help.

[@klausvonschmitto7508]

This looks like an excellent tool for me as I have a badly damaged left hand. How heavy of mono or flouro leader can this be used with? I fish with 60lb and 80lb mostly.

[@fishmadpro7210]

Hello Klaus. It works perfectly well with 0.6-3 mm. line.

[@MegaSkeet11]

thanks for the video it helped heaps. thank you

[@fishmadpro7210]

Glad it was helpful!👌

[@I-aventura]

It's the best tutorial video on KZbin that is made by the electronic Knot tool.

[@Bolanksakti]

Is the best👍

[@washingtonwas6018]

Otima explicação por esse ângulo fica bem melhor o entendimento

[@DC2GR]

It’s a PR knot. They are made with a PR bobber and on ve you get the hang of the technique it’s faster than the machine.

[@rider660r]

I just seen this somewhere else and had to look it up. When I did a search for it I also came up with the FG Wizz....... I'd go with the FG Wizz over this contraption.It doesn't need batteries,no need to use both hands and your teeth,and being made of wood it'll float unlike this thing that will only stop sinking once it hits Davy Jones's Locker. I can also make one for next to nothing since I do woodworking.

[@gunterromeo8979]

Awesome tool been looking for something like this, can you tell me the brand and where to get it, Thank you.

[@fishmadpro7210]

Hello. The link to the tool is within the description...

[@gunterromeo8979]

Thank you .awesome.

[@user-fe8mk5km8c]

PR which is very strong and much easier than the FG itself

[@stiofain4693]

Hi Could fly line be used with this tool to connect leaders

[@fishmadpro7210]

Hello. You can use any type of line as long as it is 0.6-3 mm. in diameter.

[@Jimbobdammit]

No- just a few turns in a nail knot is easy and secure on fly line

[@youturbojunior]

Onde acho esse aparelho ? .sou do Brasil , moro em mongaguá litoral sul de São Paulo, pesco na plantaforma de pesca . La é a maior plantaforma se pesca da merica latina .✌😎👍🇧🇷

[@missiletm]

Where’d you get those scissors? I like them.

[@fishmadpro7210]

Hello. You can find them here: amzn.to/3cZYwBH but I would not recommend them. If you want quality scissors, which are only +2$, check out these instead: amzn.to/3nYEXAb

[@missiletm]

@@fishmadpro7210 good to know, I have the boomerang snips already. Thanks for the reply!

[@fongvang935]

Seems good for people with limited are and finger use. I can tie it faster by hand.

[@JustinTyler111]

Not an FG knot. The FG not alternates loops between two different strands... this knot... like an albright or PR bobbin, has the loops in one direction, in succession, in two different layers. Not the same not. And i dont think this is quite the same as a PR bobbin but as others have commented, they make a tool for that too

[@andremiller1566]

I'm very curious. Is an FG knot stronger than simply connecting your main to leader using a swivel barrel and your knot of choice? I would greatly appreciate your insight🙏

[@sashahess3141]

​@@andremiller1566a lot stronger, you should always use leader knots for braid.

[@qayyumputrashah8073]

Can use for main line braid 6lbs ?

[@fishmadpro7210]

Hey. Yes, you can

[@dazza8253]

I finished tying up 3 fg knots manually only by hand when it took u approx 5mins to do so for one using this gadget.

[@fishmadpro7210]

If you can do it by hand 3 times faster, then you don't need this gadget...👌

[@andremiller1566]

I'm very curious. Is an FG knot stronger than simply connecting your main to leader using a swivel barrel and your knot of choice? I would greatly appreciate your insight🙏

[@iwill9422]

@@andremiller1566 FG knot would not be stronger. BUT it allows you to use a long leader and you can reel in into the spool. This is helpful in many situations. I use this knot on all my spin tackle. I can use 15lb braid but adjust leader to different sizes. I change between 6,8,10 lb test very often.

[@andremiller1566]

@@iwill9422 Ok this makes sense. Thanks for the info.

[@jasonhilton-ft3iz]

The FG knot is the best knot there is. Very very strong ​@andremiller1566

[@Al-oe8ib]

Would just slip off as soon as you put any weight on it, no tension when doing the windings

[@agripino411]

es necesario quemar el fluorocarbono? gracias

[@fishmadpro7210]

Sorry, I do not speak this language...

[@christosstavrinides8493]

Can this tool handle braid as thin as PE 0.3?

[@fishmadpro7210]

Hello Christos. Yes it can

[@christosstavrinides8493]

@@fishmadpro7210 thanks a lot. yes, it is not an fg knot, rather an improved albright knot, but still, it looks like it does the job pretty well. will wait and see. from 3:20 and onwards it is the same as the fg knot pretty much.

[@ravenouspathogen]

This can be done with anything from a power drill to a doorknob and pencil.

[@Ms_Fishing34]

Nice 👍🏻

[@andremiller1566]

I'm very curious. Is an FG knot stronger than simply connecting your main to leader using a swivel barrel and your knot of choice? I would greatly appreciate your insight🙏

[@Ms_Fishing34]

Depends on person actually I think. Because there are many way to connect main to leader

[@andremiller1566]

@@Ms_Fishing34 Thank you for your response! So it might be considered amateur but not necessarily inferior?

[@Ms_Fishing34]

There are strong and weak. Must try and error

[@andremiller1566]

@@Ms_Fishing34 Will do👍. Thanks for chatting 🙏.

[@UTUBEHEN]

This knot is PR knot or reverse PR knot.

[@fish7days]

Half Hitch?

[@user-qq1vo2so2r]

มาชมครับผม+1ครับ

[@shinheeyi]

Can you use this to tie PR knote?

[@fishmadpro7210]

Hey. I haven't tried PR with this gadget, but in my opinion all is possible...I might make a vid about it...

[@stevennguyen7443]

that WAS a PR knot .. not FG

[@williecolon9678]

Looked more like a improved Albright knot.

[@johnbuniack5671]

Like an Alberto knot, but not quite.

[@FishNFoolLures]

Wrong the Albright/Alberto knot has a doubled over leader and this ties around a single strain

[@kikodougies]

always use a rizzuto finish for your FG knot guys. trust me, it's way stronger than any other finish out there.

[@user-ms2lt1ho8m]

😂😂😂 ЛЕНЬ - двигатель прогресса😂😂😂.

[@ibrahimdeniz7308]

I know nothing about fishing Why is this not a pr knot or whats the difference? Is it weaker? If it is weaker, could you use that for connecting two fishing lines anyways? I saw this for cheap online and am thinking about buying a bunch and giftig them to local hobby fishermen at our river. Dont want to do it if its trash. Why would you even want to connect to lines together, is it when one spool is almost out but you want to use it up before throwing it away?

[@fishmadpro7210]

Hey. It might be that this tool is not for them as it depends on the type of fishing. Ask them if they would use it and if not, it's a tool that is nice to have in your tackle box...

[@MoeMaganis]

All that extra work after the machine, just easier to do it manually

[@baddestmofoalive]

This is a PR knot, which is typically stronger than the FG

[@johnnycash7803]

wouldn't the braid be the main line? I think you said it backwards

[@fishmadpro7210]

I might of said it the wrong way...it's not easy to speak on camera as many people think. The main purpose was to show how to use the tool and I think that all was covered...👌

[@johnnycash7803]

@@fishmadpro7210 it was buddy I just got confused a little at that part

[@roenav1547]

Looks like an unlooped Alberto knot.

[@gentleman.angler]

Nothing to do with Alberto Knot because in Alberto the braid is wrapped in a double mono line in the video the knot is 100% the FG knot.

[@SquireBozorth]

yeah not even same arena as alberto

[@stinkyfish6175]

That's not at all close to being a FG knot. I believe that's closer to being a PR bobbin?

[@geekiejesus8482]

Thats what I thought? The FG was all about the alternate line twists. This just wraps one around the other almost in the same style as an Allbright.

[@SquireBozorth]

this is a PR knot NOT FG but still great strong knot

[@bernobby9757]

Honnêtement je préfère le Knot Assist 2.0

[@richie_01]

It would be cool… if that thing would make a FG knot. In fact, the knot he made is so simple I don’t see the need for a tool unless you are handicapped in some way.

[@fishmadpro7210]

If you don't need the tool, don't spend $ and do it by hand...

[@stevennguyen7443]

Too bad that is not an FG knot .. there are no tools out there for an FG knot. that's a PR knot .. a bobbin tool does the same much cheaper.

[@internetuser4601]

There is the Daiichi-seiko Knot Assist 2.0

[@denisboulavine5007]

I bought this device on eBay. LEO brand. Watched the video about ten times It didn't work for me at all. When I try tightening the "knot" the mono line keeps sliding out. Find it hard to understand how this "knot" could work even in theory because it is essentially multiple twists of braid around the mono that you run down then up. If you think about it logically it comes as little surprise that the mono pulls out from those twists when you try tightening the "knot" ☹️

[@internetuser4601]

@@denisboulavine5007 Hello Denis, Sorry, but I'm not sure what LEO brand is... I understand it doesn't *seem like it should work, but done correctly, it surprisingly does. That's what the FG knot is -- alternating braid wraps on leader. It works on the principle like a Chinese Finger Trap. I have found the key to tying it properly is to 'serve' the knot. JP DeRose has a good video showing what he means by 'serving' the knot: kzbin.info/www/bejne/hYisYpWQitujla8 . The first time I used the Knot Assist 2.0 (also my first FG knot), my leader pulled through as well. That's when I found JP's video. After properly serving my knots before finishing, I have never had one fail. Hope this helps 😀

[@internetuser4601]

See also non-tool FG knot: kzbin.info/www/bejne/fqK6daeqe8-DaNk

[@internetuser4601]

@@denisboulavine5007 Sorry, I got notification of your comment and assumed it meant you replied to my post. That said, 'serving' the knot should also apply with that tool. Same principle. There are other videos showing PR knot.

[@hammerjoe1975]

Ezen még finomítani kell! Tönkreteszi a monofilt...

[@tannermiller3031]

Looks like it's creating an Albright

[@AMPLEDOCK]

I can see why people would like this machine but it’s probably quicker and still less fiddly to just use a double uni knot to join your leader to main line.

[@FishNFoolLures]

Because the uni to uni knot is about 1/3 as strong!!! You might as well tie a granny knot because that's how poor a uni to uni is lol.

[@TheJpingram]

More PR than FG

[@at_tro_sizematters]

Not an FG knot but nice video anyway

[@bricktop561]

The bottom end of the tool that the mono/fluro clips into damages the line, absolutely useless for fine lines below 20lb, good tool for cutting line tho 😂 why they make the clip so sharp 😢

[@Un11Hoe]

Swivel and done.

[@pollekem6459]

I can tie 3 real fg knots in the time of this video while being in my bellyboat out on the water

[@trucksntrucks3753]

video please

[@chriss12488]

Yeah u are right, a real fisherman doesn´t need any tool especially on the water. much faster without it.

[@fishmadpro7210]

When you are young and don't have any problems with your hands or fingers - Yes, but with time, all can change...

[@pollekem6459]

@@fishmadpro7210 I agree and eyes are a second next to the hands

[@menshawyshiref]

But is it strong enough???

[@ILUVTZN]

Fg knot, what fg knot?

[@andremiller1566]

I'm very curious. Is an FG knot stronger than simply connecting your main to leader using a swivel barrel and your knot of choice? I would greatly appreciate your insight🙏

[@peter-johnferreira2981]

That's is basically an ALBRIGHT knot which in my opinion is better than a fg and I can tie it 5 times faster by hand

[@victordonofrio1611]

1\2 hour later

[@dicktuliszewski6461]

You have to be kidding. I can see using this when I’m actually fishing.

[@needmoreboost6369]

It’s a poorly repurposed Bimini twist! Or pr knot but lacks the clinching of the fg knot and looks like it’ll take longer to tie with the tool just my opinion!

[@Marrio49]

In the time that it took you to make one knot with this gadget, and on your other video, the other gadget, I could’ve made three Yucatán knots by hand. So much for gadgets.

[@fishmadpro7210]

These gadgets are useful for some, and for others, they are worthless, like in your case!🎣 I'm glad that you can make knots much faster by hand...👌🐟

[@windmill10]

You don't tie half inches but half hitches.

[@RonMTube]

Nice demo but that's not an FG. Probably closer to a PR knot.

[@HardSarge]

FTFOH with that

[@randyhollerith]

They are half hitches

[@tornagawn]

That is your leader, not mainline 🤦‍♂️ 1:33. (Half hitches, not half inches)

[@eldoncrew2152]

Faster by hand

[@andremiller1566]

I'm very curious. Is an FG knot stronger than simply connecting your main to leader using a swivel barrel and your knot of choice? I would greatly appreciate your insight🙏

[@RoundupRussy]

8 minutes?? I tied my line and put the first one in the cooler already

[@niitakayamanobore1208tora]

Good Tool ! but it is not FG knot...I will use the bobbin for this knot. , much easier and doesn't need any battery.

[@andremiller1566]

I'm very curious. Is an FG knot stronger than simply connecting your main to leader using a swivel barrel and your knot of choice? I would greatly appreciate your insight🙏

[@MrCms007]

why not just save $17 dollars and tie a 2 loop connection?

[@fishmadpro7210]

The choice is always yours... Use other knots if they work well for you

[@naushrhyman6325]

Don't burn. Do rizzuto

[@SlowPitchJiggingSXM]

Not an FG knot, it’s basically a PR knot and the word is half hitch, not half inch. Cool gadget though.

[@jerbox6331]

Thats PR knot, not FG

[@soobz]

Not an FG knot! If you want FG use this method kzbin.info/www/bejne/aIDEXqlvrrlkac0

[@djmkstewart]

Not sure FG. More like a PR

[@jeburkhart]

It's a PR knot. Not FG.

[@andicampbell8621]

I presume this is a comedy show???????

[@Gha6i]

Too much manual work for an auto device.😅😅

[@ericeric5123]

this is not FG Knot...

[@boatbeard7767]

This is a PR knot. It definitely isn't a FG knot...

[@ronmb81]

Interesting knot, but it's called half hitch not half inch

[@fussybugger]

This is not an FG knot

[@artwhitting1681]

not an fg not

[@reinhardels1932]

Maybe he should read the manual as this is not an FG

[@andremiller1566]

I'm very curious. Is an FG knot stronger than simply connecting your main to leader using a swivel barrel and your knot of choice? I would greatly appreciate your insight🙏

[@tomjones7853]

I can tie a knot faster with my hands and both eyes closed

[@YodaWasSith]

Super gimmicky. I would not put a $50 lure on the end of this line tbh. Not that it's a bad knot, but there are much better ones which I can tie faster.

[@testboga5991]

I wouldn't put a €50 lure at the end of any line 😂

[@NikacFishing]

I tie it 3x faster with my hands

[@fazerfzx]

Apparently you don’t realize he’s going VERY SLOW and explaining how to do it.

[@hippiewithacowboyhat]

What a damn mess of a device...

[@pnw_element9822]

I see a wasted of money

[@tranphong3314]

Thank for inventions but not useful

[@samuelfellmann6773]

This is Not a FG!!!

[@andremiller1566]

I'm very curious. Is an FG knot stronger than simply connecting your main to leader using a swivel barrel and your knot of choice? I would greatly appreciate your insight🙏

[@samuelfellmann6773]

@@andremiller1566 the FG is especially for spinning or jigging caus it moves smooth to the rod rings. But also I think there is no better knot than fg caus is is not a knot it is a binding

[@andremiller1566]

@@samuelfellmann6773 Thanks for responding! That's pretty cool. A binding moreso than a knot. I appreciate your response.🙏

[@marcospalluto.]

I bought it and it was a nightmare. I've tried dozens of times but there's no way I can complete a knot. After inserting the mono (0.55) on the left and the braid (1 PE) on the right and starting the machine, the two threads intertwine in the upper part and it jams.

[@fishmadpro7210]

It might be that the one you've received was dfective as I had no issues with mine...

[@marcospalluto.]

@@fishmadpro7210 It Is possibile to send you a video in some way?

[@fishmadpro7210]

I don't think it's possible...😐

[@marcospalluto.]

@@fishmadpro7210 I don't think it's faulty, the mechanism seems to work fine. The problem is that the two lines systematically intertwine at the top where they exit. In your opinion, is it possible that it is not suitable for 1PE braided line? in theory it should be suitable from 0.6 onwards

[@fishmadpro7210]

@marcospalluto. It might be. I'd suggest testing it out with different line types and sizes, and if the same is happening with all of them, It's definitely the gadget, not the lines. BTW, sorry to hear that you've got issues with the tool...

[@CORTEXFLY]

Too long and too complicated !

[@crownlife2663]

Took too long😂 hand is better

[@tightlines5220]

What a waste of money!

[@Serbo-Greek]

That's useless...

[@saul78oldrite]

this is not an FG knot

[@BF4pawntard]

If you need this piece of crap for fishing I suggest learn something else . Fishing isn’t for you if you can’t tie a simple knot