Electric gate not closing

I have Elite electric gate which was function fine but all of a sudden wouldn't open but closes fine. I troubleshooted and made sure, there were no issues with the remote or in general electric supply to the gate box. I zerod in on the limit switch need to be adjusted, this video talks about how I fixed it.

[@ziggzaggzip8241]

Thank you for sharing your video. It saved me $150.00 just for a tech to come out to give me an estimate and not disclosing the labor cost! 🤬 I adjusted the closing wheel the opposite direction, and it was still doing the same problem. Gate would close, but the motor would continue to run and then the gate would open automatically and remain open. So I adjusted the opening wheel the other direction by 3-5 turns. Hit the clicker and now my gate closes without the motor running. No beeping noise, no smell of the motor over heating. I even adjusted the closing wheel perfectly to where the gate closes right before it touches the metal bracket. No more banging when closing. THANK YOU!!!

[@Northdallasconservative68]

Thank you sir. I’ve been going crazy trying to fix my gate

[@tjahn76]

Thank you. That helped me fixing problems of my gate.

[@MattyBByTheSea]

This video saved me a few hundred bucks and waiting around for the gate guy!

[@charlottemcclure675]

Thank you. This video helped us fixed the problem we were having with our gate not closing all the way.

[@guren]

Thank you for the thorough explanation! Like the other guy below me, you definitely saved me some $$!!!

[@dugglas29]

Thank you sirrrr!!! It worked perfectly, and I was able to make my gate close smoothly without banging at the end. 😃🤩

[@cesarcebreros5793]

thank you you fixed my gate problem

[@nellosabato6247]

Pretty sure you just saved me money. Thanks. This helped a lot

[@fiascostew5001]

Thanks it makes sense they have to be synchronicity perfect

[@mrsloan7361]

You’re a champion, thank you! Saved me having to get my dickhead brother-in-law around 😂

[@mathematicus3141]

Well done Sir. Thank you.

[@DAUNTLESSHUGH]

Good job. Clear. Thank you!

[@bobbiejeffersonjefferson2974]

You were right on time....THANK YOU

[@johnpemberton1343]

👍👍Thanks for the information. Your the best!

[@sune3000]

Useful info!

[@abbymendoza6298]

Gracias gracias gracias

[@miguelvaca6551]

SO WHAT WAS THE PROBLEM ON YOUR GATE? WAS IT THE LIMIT SWITCH? THANKS

[@lizmend4815]

How do you set the travel limit? I can't find any videos showing how to adjust the cams, I have an Eagle 1000. My gate opens fine but when it closes, it hits a post, bounces back, hits the post again, and then stops. Sometimes it jumps 3, 4, 5 or even more times.

[@cynthiacarrillo8547]

This video helped me fix my gate ! Thank you !

[@elmntlgnd4995]

Your limiter needs to be adjusted. This video show you how, kinda, not all the way. He touches it and shows you what it looks like. Pay attention to that when the gate opens and closes.

[@dugglas29]

His explanation helps you fix this precise issue. I had the bc same issue, closed then bounced open. You have to make sure the gear is hitting the closed position before your gate hits the post. Keep adjusting until you get the right distance before it bounces. It will work!

[@crystalsmith271]

Click that clam!

[@biggzacc2145]

Dam gate still open...crooks will slide Thur that gap

[@staytru5563]

It was only catching Bc you had the switch upside down

[@av01230]

My electric gate is opening on its own sometimes. Any ideas whats causing it?

[@elmntlgnd4995]

One of your remotes are glitching. Try resetting all of them and only programming one at a time. You should be able to find it that way. If it does it to all of them, it’s going to be on the main board.

[@av01230]

@@elmntlgnd4995 how do i reset them ?

[@bryancromwell8099]

Dip switch is bad. Look at the lights saying its opening. And the light saying its closing when closing. This was the issue I was having. A defective dipswitch on the board which was for right or left open.

[@revolutionary5577]

very very old technology , very crude type opener...