Electric Hammer Drill Restoration | Hitachi Hammer Drill

[@mantaship]

1,000 LIKES! I love, love, LOVE when the Jacob's chuck isn't replaced, but cleaned and especially polished. Your Jacob's chuck is almost chrome now and looks like ROM the Space Knight would carry it. Well done. Beautiful restoration.

[@nv2019]

外国語難あります…当方日本人です。いつもこの動画にはお世話になりありがとうございます。大変勉強になります。

[@gear_show]

私は日本の電動工具をたくさん修理し、それらからも学びました。

[@rla26368]

So relaxing. These restoration videos are just perfect for my OCD "need for completion" fix.

[@gear_show]

Thank you!

[@skids-nf7hc]

I am a South Indian.love u r work.💙💙💙💙

[@toolsconsumables7055]

Dear Sir, Your restoration is nothing shorty of excellent. A thorough disassembling followed by replacement of worn bearings, commutator brushes, etc, etc... The finish is outstanding. Very well done. Kind regards.

[@christopheranastasioswolff5429]

Your way of engineering mechanisms to take these “old guys” apart intrigues me every time I watch your videos. Keep up the grind!

[@ershadhossain3167]

""জচ৫ড়ড়ড়দগনম

[@IR-nq4qv]

It appears that this wasn't the first time this drill was worked on however it is the best time it was ever worked on, go job, very thorough. Keep up the good work, it makes us all want to succeed and do our best in what we do

[@gear_show]

Thank you for the motivation works.

[@abdulwahid8579]

Excellent job 👏

[@Bk99JzM]

Witam i pozdrawiam!!Swietna renowacja wiertarki Hitachi!!Mistrzowski remont.dokladnosc i rzetelnosc daje dobre efekty!!Dobry pokaz filmowy!!Tak trzymac!!

[@placidrenegade]

Great job, all electric power tools have to be plastic handled nowadays! But great to see old metal ones.

[@ikm64]

What an enjoyable watch...a skilled craftsman... making it all look so easy. Somehow I'm sure I'd have ended up with a lot more parts than I started out with.....Respect!

[@joe1569]

Excellent again

[@electronixTech]

It's always a pleasure watching you complete another quality restoration.

[@yeagerxp]

Well done.👍👍👍

[@stalkson]

I really like to watch your videos, great work, perfect restoration, appreciate your hard work.

[@restyfernandez1877]

Nice work

[@Magister3eros]

Que hermoso trabajo, una de las mejores restauraciones de KZbin.

[@coreysheets4862]

It may be loud but it looks good doin it. Awesome job.

[@timehunter9467]

These videos are always amazing to watch. The only thing I would have done differently is not polish the blackened metal parts. The only way these paint finishes would be better is if you could powder coat them, but that stuff isn’t cheap!

[@MultiSupertux]

We need more videos about your restoration👍👍👍👍👍👍👍👍👍

[@gear_show]

Yes thank you so much for value my works.

[@КошмарКошмар-й2б]

Very good restoration drill 👍👍👍👍and video cool 👏👏👏👏

[@gear_show]

Thank you!

[@tonyday7233]

Lovely tool, lovely job, very nice.

[@jameshanoomansing1442]

excellent work

[@gear_show]

Thank you!

[@xerejuneseve6333]

Great job,it is always nice to watch and learn something.

[@markharris5771]

Great job! You took an old piece of junk and made a decent tool out of it.

[@bobferranti5222]

Another excellent restoration!

[@LamazMaty]

Great job, nice video. 👍

[@TCK71]

Very impressive restoration!

[@ianvicedomini2648]

Superb restoration mate.

[@洪小憲-w5g]

あなたの塗料と研磨技術はフィルムに非常に優れています、私はあなたにメーターを正確に修理するためのフィルムがあることを願っています、ありがとう ^^

[@baopham-qs5zw]

Tôi mới 14 tuổi tôi rất thích xem những cái này

[@marekj.c8289]

Very well done!

[@mohamedalli4832]

Good job buddy

[@Redman_30]

Good job bud

[@faarmer]

Oh yes, that paintjob! Finally the missing element, amazing!

[@yatzecyatzec]

finesse and perfectionism

[@azevedodaniel4467]

Bravo pour cette belle vidéo et pour le travail que tu réalise ça fait depuis 1 ans que je regarde toutes tes vidéos et je les trouve excellente et j'adore les vidéos que tu fais encore un grand bravo

[@donlunn792]

Lovely job.

[@crowblunt536]

Good job man

[@gear_show]

Thank you!

[@hamidrezasadeghi9267]

great and clean job agin

[@gear_show]

Thank you!

[@SirChevy]

Looks good, but you really need to pack those bearings with grease BEFORE installing them. Putting grease on the bearings as you did around 15:05 doesn't get the grease onto the balls and races, which is where it's needed.

[@koshimazaki847]

Good job man!!!!

[@PerryCox818]

Fantastic restoration !!!

[@gordbaker896]

Very nice. A small turntable may help you paint small items. Nameplate is a bit crooked but likely is stretched Aluminium.

[@scroungasworkshop4663]

Great work. I like your videos because they are relaxing to watch and you do really good camera work. You also do a thorough job. 2 questions, how did you know that the black ring behind the chuck was left hand thread? And although I like the bright red, were you tempted to paint it Hitachi green. Well done and cheers, Stuart 🇦🇺

[@Farmall450]

Agreed on left handed

[@christastic100]

Really enjoyed watching this excellent job

[@gear_show]

Thank you!

[@mhdrauf1752]

Super extradinary job

[@andrecosta4537]

Great job! You achieve impressive results.

[@gear_show]

Thank you!

[@PescaDeNacho]

Muy buen video y restauracion saludos desde argentina!😀

[@gear_show]

Thank you!

[@keithspencersr.6806]

Outstanding paint work

[@GrouchoTM]

These are some cool videos.

[@manuelsoul1]

Bravo, eccellente restauro 👍👍👍

[@matsandresson4758]

Great job.Keep the good work.

[@blacksmith9451]

That is really good work! Awesome machine

[@derekwilkinson7939]

An excellent thorough restoration. I just don’t understand the thumbs down.

[@carlosalexandregoncalves1255]

Forte este equipamento. Show de bola seu serviço. Hitachi é bruta.

[@-slemantech6136]

Great👍👍

[@gear_show]

Thanks 😃

[@justinecooper9575]

Nice job. The only thing I would change, and this is merely my personal preference, would be to buff or sand the paint off the Hitachi name. Or maybe paint it a contrasting color.

[@gear_show]

Oh thank you for the great idea.

[@glennmoreland6457]

In an era of so many Shyte attempts at power tool "restorations" in here... It's nice to see someone going about it in the right way... There's hope yet...

[@Papa-Kev]

Great job!

[@mydachshundfamily9784]

like always, GREAT restoration!

[@gear_show]

Thank you!

[@alonsobrosmann4300]

I have never seen a more robust electric drill in my life

[@firebladex8586]

Hitachi used to make really solid stuff.

[@alexey9900]

GOOD👍👍👍

[@ВладимирШвец-и9ф]

Однозначно класс. Шикарная вещь в алюминиевом корпусе,загляденье . У меня такая Хитачка,только уже в пластике 800вт,2 скорости и удар.👍

[@andrewakboom]

В целом супер. Но глянцевый патрон при работе это ад. Количество смазки в ударном редукторе излишне, будут гидроудары. Ну и про синий герметик для резьбы писали уже англоязычные товарищи. Делая скидку на то, что реставрировал электрик, очень достойно.

[@ВладимирШвец-и9ф]

@@andrewakboom А чем смущает глянцевый патрон ? Он же не от руки зажимается ,а ключём.

[@andrewakboom]

@@ВладимирШвец-и9ф ну, согласен, ключём. Привык к самозажимным, ключ неудобен.

[@ВладимирШвец-и9ф]

@@andrewakboom у меня две киловатки, Макита и Метабо с самозажимными,да это удобней чем ключевой, но на этой Хитачке 16 диаметр сверла,поэтому ключ.

[@andrewakboom]

@@ВладимирШвец-и9ф Принято. 16 мм только ключ.

[@kelsenleaopereira7973]

Serviço maravilhoso. 👏👏👏👏

[@Cany0many]

Well done.

[@ToyotaStarletP7]

Really nice! Except the silver paint... Just cleaning and sanding the silver parts would be better , maybe polishing...

[@nnokwannokwa3074]

you mean the silver paint is not good in your eyes or in his own eyes?why not you upload your own video,enemy of progress like you

[@ToyotaStarletP7]

@@nnokwannokwa3074 calm down, I said really nice. You can call it viewer interaction or feedback. Maybe my comment enables progress in his eyes... Nobody knows.

[@Jnes01]

It's beautiful.

[@sonnguyenn97]

Great 😁

[@MrDekiller1]

Smart idea with the tap wrench

[@keithjames9654]

Shinnied up the outside of the Chuck real nice - What about the rusty old INSIDE ???

[@Tyler-ub2bu]

Ooooooo Good point 😉

[@marcocinquini1985]

Nice restoration! I like the smooth sound of the motor.

[@AboveTheSystem]

Отлично 👍

[@mehmettelli7311]

Nice

[@gear_show]

Thank you!

[@luisangelcampos1681]

Excelent tool,oldscool.¡¡

[@박지섭-o6v]

Good

[@robertobezerra8376]

Trabalho lindo parabéns.

[@samsingh2042]

Back in the days that was a drill to have, looks like an 1980s model

[@br14nn14]

pense que lo pintabas en amarillo que fue su color original, supongo... buena restauracíon, un salu2

[@frankstrawnation]

Yes, yellow was definitively its original color.

[@firebladex8586]

they managed to get paint on the commutator!

[@matiasbravo8189]

Las usas o las dejas guardadas??

[@davidronson8712]

By 6:45 I have forgotten where everything goes.

[@stachycatabas873]

Like tysy tube restoration

[@Reaper-3000]

Oh god here we go with the crimp vs solder experts

[@jamesbond9873]

Solder!

[@ytxstream]

definitely crimping

[@Lotofleaders]

Solder, then crimping!

[@getyourkicksagain]

Crimp, then solder, then heat shrink tubing!

[@robocop6666666]

What great job love this channel can I ask . What do you do with the tools once you have fixed them ? Keep or sell🇬🇧

[@gear_show]

Now I still keep. Thank you!

[@JAKOB1977]

wicked.. I have heard about this before.. Im pretty sure it's the thing that goes under the phrase "vintage porn" I like it, like it a lot... solid work. +1

[@gear_show]

Oh haha, thank you for like my work.

[@gentiligiuliano7882]

Which kind of spray paint do you use for your projects? I never had luck with spray cans, I find color not really strong for a tool. Other youtoube channels on tools restoration use a 2 step prcess with a base color and a transparent lacquer, that makes sense, expecially when lacquer is a 2 component one. Original color should have been some kind of enamel (but i guess 2-component enamel) or may be some powder based paint. Can you include brand of products you use for restorations (and eveentually tell how behaves color after some months of use) ? You definetly could take advantage of some cheap chinese ultrasound cleaner, it will make life much easier on small components.

[@toanhoang8941]

Million like

[@reidamontanha9367]

Meu sonho saber fazer o que VC faz.gosto muito de mecher nas coisa pra conserta ,mais n consigo,parabéns

[@LWUndsoo]

Better than factory new

[@jurgensduplessis1964]

What's is the drilling speed of the drill machine?

[@alejandrom.r3402]

Con lo lindo que quedó no dan ganas de usarlo para trabajar XD

[@Asault964]

Min: 12:00 i think you have to restorate your own stood drill

[@gear_show]

Thank you for the suggestion, I will do it next time.

[@TheOnukiseijin]

お見事。

[@dschon7]

What is that material called you used at 5:28 a piece of it broke on a panel hoist i cant find it cuz idk what its called

[@rsyt3113]

9:50 Please can you tell me what the white powder you use is

[@Fridelain]

What grit of sandpaper on the primer?

[@teppaha]

hell.. i work over 10 year in construction area and never heard that hitachi was red. what year is it? last historical tool i'd hold in my arms was in august. it was working and still in good shape. black hammer drill with detachable cord, labeled "Atlas Copco PDE 13 RQ" , it had CE and (lol?) PCT russian standard. made in germany. You know who is manufacturer....=)

[@Road_Rash]

Pretty sure someone painted it that color before he got it. The original color was most likely yellow.

[@Tyler-ub2bu]

@@Road_Rash no green not yellow

[@DavidPlass]

What is the tool used at 6:47 to pull out the bearing?

[@marquelcherry9075]

Whirrr,whirrr,Whirrrrr,drill noise buzz buzz buzz