Electric Mountainboard Trampa - VESC Dual SK3-6374 12S Battery

- VESC Dual
- SK3 6374 Dual
- 12S Battery
- 20Km Riding 390W Consumption.

[@sparrowhawk5673]

I really appreciate the set of you put on there. Seen how far you've gone. Seeing the miles per hour. Thank you

[@ratheonhudson3311]

Nice speedometer reading, also your setup looks so smooth! And the color matching is nice

[@davidlinscheid2321]

That's a great board. Thanks for the ride along!

[@adamhawksworth2039]

Moving along nicely. I'm upgrading to belt now as well. Looking forward to sharing. You have some great paths to travel.

[@-martin4426]

Hi Adam, Nice to meet again !... My hometown has good bike road. I am curious about your upgrading belt... :-)...

[@sotheamam1244]

That is so freakin cool man

[@axonfox7692]

Im so worried. If the rain is come my be destroyed motor.. But ....nice. Prepormance board

[@monstercoatingsnyc]

What are you using to do the statistics on the bottom of the screen? I was looking to something similar for my rides.

[@-martin4426]

Hello, This is showed by SONY Action CAM.

[@mattwatkins1850]

What trampa board ate you using hs11? Do you have holy pro pcb veesion?

[@zachdavis8167]

You should use the terrain on the outsides of the trail, especially the sloped side. Would make for more interesting to me personally

[@gugaboyz]

Which turnigy aerodrive sk3 6374 you have there? If they are the 149kv they are 2250w so 4500w total.. Nice ride. You didn't push it to full throttle ;)

[@lync254]

This is sick

[@WORLD-OF-MERLIN]

I would like to make a 4WD electric skateboard. I've already bought pretty much everything that includes two 6374 motors and two VESC's with a Nano remote control. Haven't got the stuff yet, but wanted to know if my remote control and its receiver can handle four VESC's? Also, is there anything I'm missing in terms of electronics?

[@-martin4426]

You need just two VESC and some receiver Y cable.

[@FeliceQuitadamo]

Hi Martin, i have two Turnigy Aerodrive SK3 - 6374-192kv Brushless Outrunner Motor and two ZIPPY Compact 4000mAh 6S 25C Lipo ... how can i control this motor? which kind of esc vesc can i buy? If it is possible send me a link. Thank you so much ... of course your job is awesome. :-)

[@Timsturbs]

each can do 2200watt 4400 in total oh nice :D have you ever done it fill throttle?

[@keremyldrm2260]

how did you start to ride without pushing? I asked it as I have same motors too but they are sensorless so I must push it to ride

[@gugaboyz]

I dont push, and they start but it's always battery drainer to speed from stopped positision. Check you esc settings. The turnigy aerodrive sk3 6374 149kv run from 0

[@efoil]

I like it!

[@-martin4426]

Thank you!.. :-)

[@autokanada]

TrackStar Gen2 150A are (2S - 6S) compatible how come you use ESC in 12S configuration ?

[@-martin4426]

Hi, Sorry, I made a mistake. I'm using VESC

[@cristianmiranda2400]

this motor is rated at 44v max and a 12s fully charge is 50v did you do something to control the voltage?

[@-martin4426]

I know Sk3 6374 motor is support 12S. So i didn't control for voltage.

[@cristianmiranda2400]

윤석-Martin 전. what about the vesc do they get hot at all?

[@-martin4426]

Vesc support high voltage esc and cheapest. This is good solution. The fever is not severe.

[@pgzowski]

Nice setup man! My goal is to have something similar. What sort of 12s battery are you running? Im planning on using 2x 5s lipo's in series. Running dual 6355 190kv. Im 220 lbs. Any suggestions or advice for my setup?

[@-martin4426]

Hi, My 12s battery is 2 x 6s lipo's in series. Capacity is 20AH. I guess your motor is MayTech. Right?.. I think that that motor is very good.

[@troyl5929]

Are you on BLDC?

[@vernoncarpenterjr6213]

What kind of kneepads are those, I like em

[@tueboard]

which motors are you using 149kv or 192kv?

[@-martin4426]

I 'm using 192KV motor... 192KV Motor is more powerful than 149KV

[@-martin4426]

I'm using 192kv motor

[@esk8spirit362]

192 is less powerful... the more KV the less power it has, the more top speed...

[@ThePlanet_L.I.]

😳🤯👍🏾

[@Ripermp345]

how can I make one in the us I want to make one so bad

[@DeathKingNighT]

What motor mounts and trucks you are use? Can you give links? Thank you!

[@-martin4426]

This motor mount is selled only in domestic.

[@DeathKingNighT]

where are you live?

[@-martin4426]

South Korea.

[@realkimchi88]

hey what board and trucks are those?

[@-martin4426]

This board is Trampa www.trampaboards.com/35-holypro--pro-mountainboard-c-365.html

[@electriccruiser7796]

Which trucks are they?

[@-martin4426]

This is Ultimate truck

[@jundaev]

촬영은 어떤걸로 한것이죠? GPS가 함께나오죠?

[@jundaev]

아 소니 액션캠요? 흔들림도 잡아주네요? 짐벌사용하셨나요?

[@-martin4426]

아니요.. 손에 들고 타면 구지 짐벌 없도 되더라구요..

[@101hotwire]

Should I buy trampa trucks or MBS Matrix

[@-martin4426]

Please refer to below link. www.trampaboards.com/

[@Wschles]

Would you sell one of your e mtb builds? Cheaper to go with scramboards? $1700 usd shipped from U.K. To usa.

[@-martin4426]

Sorry about that. It can not be sold overseas...

[@Aggace]

I heartily do not recommend scramboards. Best to build your own at the moment. I have one from scramboards and I do not recommend to anyone.

[@emailtorst]

Hey man, what's wrong with scramboards? I am keen on one but am doing my research first. Thanks.

[@user-tk7nk1cr4n]

영상속 계기판 나오는건 어플 인가요?

[@-martin4426]

소니 액션캠 프로그램입니다. 액션캠 리모트 컨트롤러 녹화한 것은 저렇게 속도표시가 포함되어 인코딩이 가능합니다.

[@Legal_Aid]

Чертежи крепления моторов ???

[@-martin4426]

I can't read your native language. Could you ask me in English?

[@user-xw2le5qs7f]

가격때좀 알수잇나요

[@JoseHernandez-qp3vq]

I want to buy one

[@sanket6913]

Do u sell one

[@-martin4426]

Sorry!. I am just making it a hobby.

[@user-jf2xm6up6s]

Какая дорога... Стеклышко. Вамбы на наш асфальт покататься.))))

[@daroldvillegas4644]

You didt reach the maximum speed of that board

[@-martin4426]

I enjoy safe riding. :-)

[@sirtimatbob]

@@-martin4426 Have you tried to see what maximum it can reach? Does it force you to slow down due to the belt when downhill boarding? What about throwing on some kevlar gear, helmet, wristguards, knee/elbow, whole kit and then bombing a safe hill?

[@rcpete7055]

Too slow..

[@ratheonhudson3311]

Yes, lots of board run a minimum of 40kph, mine is at 45.5kph and it carried a big block 40ah 36v battery on the centre with a 12v 50ah next to that