Thank You so much! My fireplace is working!!! Lucky I didn't have a fire. Thank YOU !
@JouppiOutdoors3 ай бұрын
You’re welcome! Thanks for watching!
@BearfootAdventures2 жыл бұрын
You could have gave me a shout out on when we replaced ours. We did a video on replacing exact fireplace.
@michaelwarmbier6396 Жыл бұрын
We've been fulltime in our Grand Design 5th wheel for two years. Occasionally when using the fireplace I'd get the code E3. Which, according to the fireplace operating manual is clogged or dirty vents. Great video. Made the job super easy. I pulled out the fireplace and the vents were very dirty! Thanks!
@JouppiOutdoors Жыл бұрын
Glad the video was helpful! Thank you for watching!
@scottpecora3718 ай бұрын
Only thing I'd add would be to add a drop or two of penentrating oil the the bearing on the fan motor. Something like "Break-Free" or Amsoil penentrating oil, or Boeing's penentrating oil, you get the gest. But Not WD40, it's more a cleaning solvent.
@JouppiOutdoors8 ай бұрын
Great suggestion! Thanks for watching!
@JarheadAndGingersJourney2 жыл бұрын
Oh man! We haven’t even thought about cleaning the fireplace. Another addition to the honey do list. Thanks a lot. 😂👍❤️
@JouppiOutdoors2 жыл бұрын
Honestly, I thought it would be much more of a pain than it was. Funny how long that list can get even though you’re living in a small space! I feel like I have more to do now than when we had a 1700 square foot house! Lol
@DreamingOutloudRVing2 жыл бұрын
Great video. If anything pull it and plug holes for rodent protection.
@JouppiOutdoors2 жыл бұрын
Thanks, I was glad I found that as well! Definitely don’t want any uninvited guests coming through there! Thank you for watching!
@barbwire652 жыл бұрын
Thanks that's a good tip. I've not cleaned mine yet the only problem I'm having right now is the adjustment of temperature. I'm constantly trying to a temperature that I wanting. Should I say I'm constantly turning the knob and never getting a good temperature that I want.
@JouppiOutdoors2 жыл бұрын
Perhaps the temperature sensor is dusty? That is one of the symptoms I read about when researching why the fireplace should be cleaned. Thank you for watching!
@barbwire652 жыл бұрын
@@JouppiOutdoors ok thanks, I give that a try.
@Sydneysss Жыл бұрын
Mine started making a squeaking noise, I looked in there and the fan is just caked in dust hopefully its ok, will clean is asap thanks for the walkthrough I didnt know how to get the first thing off without breaking it. I wish I could clean the inside of the front glass too its dusty, went way too long without clean.
@JouppiOutdoors Жыл бұрын
You can put a little bit of lubricant on the shaft of the fan to help with the squeaking. Thanks for watching!
@miltonherron92372 жыл бұрын
Good video. Never knew what made those flames😂
@JouppiOutdoors2 жыл бұрын
I wasn’t sure either! Thanks for watching!
@saxon8402 жыл бұрын
Good video. I’m guessing you guys were clear of that horrific weather the other night.
@JouppiOutdoors2 жыл бұрын
Thank you, yes we are near the Smoky Mountains on the NC side! It’s a sobering reminder how powerful Mother Nature can be. Thank you for watching.
@loriamckinnie23527 ай бұрын
Our flames no longer work. Everything else works well. Any suggestions for getting the flames back working ? Thanks!!!
@JouppiOutdoors7 ай бұрын
Unfortunately I have not run across this issue…sorry I couldn’t be of more help!
@JClemit Жыл бұрын
I havce a Grand Design with a Furrion fireplace as well. It kept giving me the blinking red light, so I found your video to maintenance. My fireplace was just as clean as yours, and so I left it half installed, and turned it back on. It appears that Grand Design did not offer enough airflow on the backside of the fireplace, so it would overheat after being on for about an hour for no obvious reason. I've vented the backside and now seem to be having no problems. I know it's relative to design and not maintenance, but it might help someone who's stuck.
@JouppiOutdoors Жыл бұрын
Great info, thanks for sharing!
@MidLifeJourney2 жыл бұрын
Great video! We have the same fireplace. I took our out some time ago when the switch stopped working. We had to use the remote to turn it off and on. One day the switch started working again. I have thought about replacing it. Have you checked in to a replacement besides Furion? Thanks for sharing!
@JouppiOutdoors2 жыл бұрын
We have not looked at replacements, this unit is still kicking along really well (so far!). Thanks for watching!
@kekoab221310 ай бұрын
Is it safe to run it full time during the day and night?
@JouppiOutdoors10 ай бұрын
We never run ours all night, but we have run it all day until we go to bed. Plus, if the temps are below freezing the furnace needs to run to heat the underbelly and keep the tanks from freezing.
@ursssssssaaaaa Жыл бұрын
So how do I get inside the glass though to clean where the rocks are?
@JouppiOutdoors Жыл бұрын
The back is removable so you can access the area where the rocks are.
@mctech46142 жыл бұрын
curious why you don't use it at night? Thanks for the video.
@JouppiOutdoors2 жыл бұрын
We use the propane heat at night because it also heats the underbelly to keep our tanks and water lines from freezing. The fireplace would definitely keep us warm enough, but does nothing for the underbelly. We also use a small Honeywell space heater in the bunk room because the propane heat duct work isn’t the best toward the rear of the trailer. Thanks for watching!