2024 Electric Wheelchair Programmers & Programming 352-999-4477

352-999-4477
www.joystickrepair.com
Ship to:
IMP
6672 W. Grover Cleveland blvd.
Homosassa Fl. 34446
1800 717 1252 old phone number
www.ElectricWheelchairParts.com
Electric Wheelchair Parts and Repair
Understanding Powerchair Programmers

[@sharkybelgard8686]

You’re doing a great job Frank. Thank you. I’m going to call you when I get my Angel’s chair out of storage. It was running great six years ago then six months after her passing I plugged the charger in and the joy stick lights were flashing. I’ve watch your videos and know you can help. 🙏🏻🙂 I’m sure I’ll need batteries

[@technicholls]

Hey Frank, Thanks for another video. We have an Invacare Pronto M91 chair. What programer is used for it and what is the cost? Also, we have an older Permobil C300. Can the same programer be used for it?

[@rheamarschall1662]

I bought a Dynamic dx programmer and when I tried going to the tech setting it asked for the 3number code. Is their any way around this? I bought it used.

[@patkearney7126]

hi frank would the programer tell me what is wrong with joystick that wont turn on ? it is a 6000 quantum pride

[@austinmoore26]

I definitely need one of these

[@astrosmell]

If we have the one that will work, $89 to program. Frank 352 999 4477

[@DDinVT]

What (if anything) would be compatible with a Yanteon controller?

[@moon03210]

Have an Sp1B V 2.77 doesn't work on Pride Gogo's for some reason. Stuck in ' entering menu' mode when connected to molex . Tried key on /off etc Any special way to enter the controller? Buttons to push? SP1B supposedly is the ultimate programmer /engineering version. It does work on many others (also have 3 prone adaptor tip for sp1b that works on some newer scooters just not on some..like Gogo's..) please advise Thanks

[@astrosmell]

I believe that the trouble is most likely that the system is an "S drive". The S drive I believe has its own programmer. (not the SP1)

[@zenza64]

Not sure your channel is used still but I have a quantum q6 edge and the controller went out I tried buying one but it was just fro a edge 2.0 not then Q6 but it would freeze on then Q boot screen does this need to be programmed to unlock or is it the wrong controller but the part number is the same but if it needs a programmer can you tell me what programming to use

[@astrosmell]

Give me a call. Frank 1800 717 1252

[@matthewsjourney2064]

Hey frank i have a pride victory lx 10 sport is there anyway i can get this thing to go faster it is built like a tank but seems a bit slow

[@astrosmell]

call me 1800 717 1252 Thanks, Frank

[@bbroken1]

Hello, i was wondering what is a good programmer for the quantum q-logic 3 joystick its on a forfront 2 chair? Thanks

[@astrosmell]

eleasmb6976 only choice Frank-

[@TheRam9126]

what programmer would work on ewheel mobility scooter?

[@abednier]

Great video by the way , but I want to ask about INVACARE G40 AND G40plus models. they need programming Can the DX programmer be used on them. or do they need a software like LINX? And could the MK6I program The DX joystick(DX-Rem 24SC) and (DX- REM 24S8) your insight is highly appreciated.

[@astrosmell]

DX programmer, I believe, no adapter is needed. Small plug in. Call if you like. Frank 1800 717 1252

[@abednier]

@@astrosmell thank you, I have 1 flashing light on my joystic DX-Rem 24SC) MANUAL inicates that i should rep[lace electronics, power module status light green light module status green joystick staus flashing one time, so I figured that it would require programing. will the DX programmer resolve this issue? I sent a message on your website , so I dont know if you have received it. Does frank has a mobile number , so I can do a contact on whatsapp ? Regards

[@PixieAngelsYT]

Are you able increase the max speed of 6mph, on a 2020 permobil F3? Thanks.

[@astrosmell]

I do not believe that you can increase max. speed. There is a mechanical limit to the paired motors and gearboxes at 24 volts. Thanks, Frank

[@LieutenantDan-cw7tu]

I have an Amy Fastrack M3 that's very slow like 1 or 2 mph but fast in reverse can you reprogram it to a faster speed?

[@astrosmell]

From what I gather, the alltrack has an Rnet system. At this time, we do not have the programmer for Rnet. We can get you one, but they are not cheap. I believe around $550

[@450mijaou1]

Do you know what programmer is needed for a quantum edge? I bought a PP1 quantum edition. But it doesn't read my chair. I know it works because I was able to adjust the speed on my pride Jazzy.

[@astrosmell]

You need a quantum controller. Not a PP1. Depending on age of your electronics, there is a choice of 2. One for older one for newer. Thanks, Frank

[@450mijaou1]

@@astrosmell I got a 2022 q6 edge HD and a 2019 Q6 edge 2.0.

[@felipeoliveiraassistencia7849]

information as well? How to get it. Here in Brazil it is impossible...

[@stuartnicholls7531]

Hi Frank, I am Nick from the UK to start I bought a 2015 quickie i cant read the model number but the seral no 4451224. it has a 3pin plug and the controller is a PG Drive Tech the label is printed D51122.03 and BN15020208 an embossed no in the plastic PA66-GF25 . my problem is its to vicious for my wife. can it be programmed to be slowed down , the joy stick to have more movement and generally made a lot more comfortable to operate. if this can be done is it possible to download software to update it. thanks

[@astrosmell]

You have an RNET system. You will need a RNET programmer. The least expensive one is PC based. If we had one we could do it for you, but we do not. If you are interested in getting one give me a call. Frank 352 999 4477

[@brianfindsall]

Hi please can you tell me what it would cost approx if i take it to nearest dealer to have my speed limit corrected. this is due to putting smaller all terrain tyres on i am bnow loosing about 2 mph so need correction. but live on tight budget. so hoping it dont cost are and another leg. Thankyou mate liking yer vlogs. Bri n Sue

[@astrosmell]

You do not have nearly enough information for me to help you out please let me know the make model of the machine if it is a Chinese made machine folding chair chances are there is no programmer that’s going to help you you can always call me at 1-800-717-1252

[@robdriver5131]

What programmer do I need for a drive cirrus plus ec?

[@astrosmell]

PG drives PP1 programmer, We have one.., Thanks,Frank 1800 717 1252

[@davidwarren7900]

My electric wheelchair won't move I checked the voltage and it said 24.2 and it's flashing all the lights 8 times

[@astrosmell]

Not quite enough info. Please call. 1800 717 1252

[@kpc5]

I need a PP1 programmer because my chair has crashed and i need the programmer, where can i buy one from??

[@astrosmell]

We have one for sale.. Give me a call, Thanks Frank 1800 717 1252

[@astrosmell]

Thanks for all your questions. We try to answer them all. If you have an open ended, or tricky question, please call. We are available 9 - 5 Mountain Time. 1800 717 1252. Thanks, Frank

[@GhostvaperYT]

i got a programmer software and dongle for my mobility scooter the rascal ventura - now it takes off like a turbo..........................fast!

[@tonyrodriguez9163]

I have a buzzaround Lx mobility scooter can I make it go faster

[@Soulstealer24]

Hey, nice videos. I was hoping I can ask a few questions and get the answers u might have for them

[@TheRam9126]

WILL DX PROGRAMMER WORK ON EWHEELS MOBILITY SCOOTERS?

[@astrosmell]

DX is for powerchairs, more accurately powerchairs with Dynamic control systems. (Dynamic is the manufacture)

[@TheRam9126]

@@astrosmell what kind of programmer do I need for a ewheel mobility scooter

[@astrosmell]

what is the make and model of the joystick/ module? Sometimes, manufactures systems are a 1 off and cannot be programmed.

[@TheRam9126]

@@astrosmell it is a E Wheels mobility scooter

[@muratgokdag3517]

👍👍👍👍👍👍😊

[@larryjames965]

how much for a programer for a jazzy 600

[@astrosmell]

Larry, what joystick is on the Jazzy 600?

[@larryjames965]

@@astrosmell it doesn't say on joy stick

[@astrosmell]

www.joystickrepair.com/joystick-identification

[@briarz101]

wireless mic to plug into your cam is cheap! Can barely hear you

[@mustangperry1469]

i have victory 10

[@astrosmell]

Feel free to give me a call. 1800 717 1252 Frank