Thx for the video. So, mine is that same controller, from the looks. I thought I was getting an error code, but mine was a little different as all my LEDs are blinking. They are blinking 7 or 8 times. 7 times on start then 8 seemingly at random. After I saw this I had to have no luck with that though. Maybe I am doing that wrong because i cannot get the joystick to chirp. I should say I just picked this up second hand and i was told the batteries were bad. I have a lithium battery i am trying to use. I think its all good though. But Why wont it go!? All i can do it power it on and it beeps a grumpy beep and all the lights flash 7 times then nothing. If i wiggle the stick sometimes it flashes all the lights 8 times at me. then i can power it off.

Frank, I’m trying to get a chair going for my disabled sister-in-law , an Invacare Pronto M91 Sure-step. The power light goes on and goes left to right repeatedly and the service light blinks 5 times, what are your suggestions?

When my husband turns on his chair three lights come on and then the controller turns off. No flashing lights. Just three green lights.

Awesome information in this video thank you for helping people with simple things like this it can be really hard to get the info even from the company

Great video you are very helpful I am in longtime chair user I in fact have 10 different chairs how much do you charge for consultation I have some questions about replacing the joystick and control module on a invacare SP2 HD I would like to go with a mark 6 joystick and the compatible control box I might add that the chair is currently in Bogota Colombia and I want to be able to take the parts back with me on my next visit and install them part of this reason is I really need to be able to add the gyro and to be able to have the sd card for programming which I do on one of the chairs that I have at home in Alaska

Three pin wali cable parch me

Hi Frank my wheel chair of control box handle not work

Reminds me of my old Atari5200 joystick.🕹️

Hello, i was wondering what is a good programmer for the quantum q-logic 3 joystick its on a forfront 2 chair? Thanks

A very big thankyou for the lockout tip, my Mum's chair has been out of action for weeks and I got it going in a few seconds😊😊

In joystick always showing " Drive Lock Out" and the wheelchair not working. My wheelchair is TDX mid wheel means 6wheel

How do you program the control model? On a wheelchair.?

I just wet my controller and now it doesn’t want too turn on

I have a working controller for a Teknique and trying to put it on an MPV5 but having trouble since the MPV5 has the plastic connections and the Teknique has individual wires. Are these interchangeable?

I have one Yeo flashing Amy chair runs fine slows to cral one flashing Yeo turn of run fine then repeats I have spare module and it's a VR2 on Amy chair

MUCHAS GRACIAS 🎉

Thank you!!!

Hello sir , my joystick model is Shark DK-REMD21 and my wrench flashes 9 times , how could u help me ?

Thanks Frank,very good guess

Have a pride jet ultra counting up from left to right and then goes out then repeats. I've seen some unlock videos but there is no beeping on power up or holding joy stick

My VR2 code 7 with speed lights all 4 flashing rapidly...what do i do. I'm in Accra Ghana west africa....

Thanks 😊

When the joystick gets wet is there an easy fix

Hello. Tell me how to turn off the reverse sound on this joystick? Thank you.

Hi I'm having trouble getting any technician to come and install a new joystick on my grandmas XHD. I already have the part but hover round doesn't have anyone to install it in Wyoming and all of the local places refuse to work on hover rounds. I was wondering if it would be possible to set up a call with you and possibly have you talk me through installing it or if you knew of a video that i could follow along with. Thank you.

I have the 600hd. I was getting the 9 flashes. Replace the joystick, control module. Seems to work fine now until I try to go into Walmart. Every time I go into Walmart the chair goes along and stops. The nine light flash. I turn it off and restart. It will go along a few feet and stop with the nine wrench flashes. It restart a few feet and stops continuesly. Outside of Walmart and all works fine. What can it be?

how much for a programer for a jazzy 600

Як білшити скорість на електрокалясці permobil c400

This video helped me repair my electric chair, thank you

👍👍👍👍👍👍😊

What a kind and helpful individual. I called Frank and he advised on my next course of action based on some unusual error codes.

Hi, my uncle has a wheel char, brand: liberty 312. Controller light blinks, how can I trouble shoot it?.

Would you happen to have a wiring schematic for a Jazzy 1122 and a Hoveround. I'm trying to swap the controller from the Hoveround to the Jazzy. The only difference that I can see is the two small wires that plugin in to the control board, that one of those wires connects to a different pin. I think theses wires connect to the motor disengage switches.

Hi my name is Travis Wilkes and my neighbor is handicapped and I'm trying to help him with his wheelchair he's got a permobil 2004 and there's a joystick are coming up turn on 0808 if you have any advice at all I would really appreciate it

I definitely need one of these

Tried but it didn't beep😮

Batteries are good charged and giving 26 VDC

I have wheelchair. The joystick is PG drive D50963.02. It keeps flashing right to left and left to right red to green alinks and back. some times it only blinks red. I tried several times as you suggested but no change. Please help

So good to see you again. It’s been a while. I can’t tell you how much I enjoy watching your videos. I have four😊 power wheelchairs and could use help with a couple of them.

please Can I buy a new or used one and how much does it cost?

Frank, I'm so glad you are here doing this. It's 5 years after you posted this in 2024 and I'm still getting SO MUCH from your videos. I hope you are being successful! Thank you!

Cool to see a new video, I look forward to hearing from you about all the parts I sent!

Good to see you again, I still have the Pride scoot, hardly have used it, rare store trips, and just keep the charge regularly, especially when temp drops;)...

Are you in gainesville? I am trying to help someone with they're chair, they have the 3 prong one, 9 flashes, i replaced the ecm already, down to the joystick now, interested in a price quote

Thankyou!!!! It is so vulnerable and frightening to lose your mobility, specially ahead of special events. You’ve really made a difference to peoples lives! Thank you so much!

Have an Sp1B V 2.77 doesn't work on Pride Gogo's for some reason. Stuck in ' entering menu' mode when connected to molex . Tried key on /off etc Any special way to enter the controller? Buttons to push? SP1B supposedly is the ultimate programmer /engineering version. It does work on many others (also have 3 prone adaptor tip for sp1b that works on some newer scooters just not on some..like Gogo's..) please advise Thanks

Thanks alot Frank for the information...we have a new electric wheelchair and it has issues I will put it to charge for almost 10hours but when i turn it on the next day, the bars do not light up at all...the light just comes on for a second and then goes off How can i go about it? Clare, Uganda

Very informative video thank you. Was wondering if you could tell me whether I need new motors or just brushes my Jazzy elite HD sometimes hesitates when I go to make extreme turns like a pinpoint turn. Thank you in advance for any information you can give me.

Hi Frank, I am Nick from the UK to start I bought a 2015 quickie i cant read the model number but the seral no 4451224. it has a 3pin plug and the controller is a PG Drive Tech the label is printed D51122.03 and BN15020208 an embossed no in the plastic PA66-GF25 . my problem is its to vicious for my wife. can it be programmed to be slowed down , the joy stick to have more movement and generally made a lot more comfortable to operate. if this can be done is it possible to download software to update it. thanks

Nice video. I'd rather have you fixing my chair than the medical supply place where I got it.