Electrical apprentice tool load out / Milwaukee packout load out

Hey guys today I just wanted to go over my tools for work , sorry its been so long but I'm gonna try to get back at it, I need a mic adapter for my helmet, until then more tools ! New people to the channel watch my old videos to catch up , leave a like and a comment , thanks for watching, if you like ill go into detail and prices on my tools

[@JoshR512]

Was that the corn man? 😂

[@bigheadrider2667]

Corn man or raspado man or Cotten candy man 😂. You should hear the ice cream truck music

[@sparkspur6770]

Solid tools broham, glad to see a tour where the guy actually uses his tools

[@bigheadrider2667]

Thanks my man I appreciate it , and hell yeah can’t talk about em If I ne’er used them ..... might do a boot review or something in a week or two

[@luisito2462]

Good stuff.. just got my pack out today and I’m excited to get all my stuff nice and organized

[@bigheadrider2667]

Thanks bro , their good systems , I’ve had a pack out for 3 years already no complaints , other than they don’t sell stuff that DIY people make but I bet Milwaukee would tax that stuff 50% lol .. you’ll like it

[@electricalron]

The car horns is the best part of the video.

[@bigheadrider2667]

I think corn man takes the cake . Lol

[@wintrow.outdoors154]

Finally.. someone who uses their tools

[@bigheadrider2667]

I’ve been neglecting them but I’m back on them after a 2 month break .... trying to get a veto open top tote just to see if I like it .... but yeah I use em , lol .... surprising to see people on a job not use them

[@bigheadrider2667]

For the new people watching what would you guys like from my tool content ?? Favorite tool ?? First day on the job must-haves ? Let me know id be happy to put some for videos out !

[@MrErick2391]

That’s awesome setup bro, and you have journeyman asking to borrow tools! Haha 😂 my foreman has also asked to borrow my tools too and it’s annoying sometimes being the only guy with tools, but what can we do lol, stay safe bro

[@bigheadrider2667]

Everybody ask for them 😂😂 I just started with a new company last week and I’m welding too now so they’ll ask for my channies and impact/saws when I’m not using them 😂😭 crazzzzy , you too bro

[@karlilomeli7339]

Nice video bud! Very informative! 🤘🏼

[@bigheadrider2667]

Karli Lomeli thankssss i wanna do a “ detailed “ video next explaining what tool is for what task

[@CesarMartinez-br5qu]

Bro that backyard tho!

[@bigheadrider2667]

It’s actually the side hahaha

[@Codym522]

just kidding its a square... lmao got me

[@bigheadrider2667]

I got a new triangle , wanna see ?

[@danielmoreno9695]

You’d be a coo coworker bruh

[@bigheadrider2667]

@@danielmoreno9695 hahahah thanks man I’ve gotten that a lot actually , just a normal dude trying to get work done !

[@mhctools]

Good video. Muy bueno tenés de todo

[@bigheadrider2667]

Gracias mi amigo

[@EZBANK4L_]

Good Shit my brother

[@bigheadrider2667]

Thanks my man , I appreciate the love

[@heightskings6693]

Go into detail on your EDC tools please

[@kiralypeter88]

Check out the knipex 9511165. You will never use your side cutters ever again. unless if youre cutting steel.

[@bigheadrider2667]

I used some at work last week from one of my buddies , solid ass cutters . I was gonna get the Klein ones but never pulled the trigger

[@prouddaddyofdos]

Tried to watch bro, but that alarm!

[@bigheadrider2667]

Hahaha all good bro

[@ameanmc7066]

You should record an update, you got good stuff especially for a 2nd year

[@bigheadrider2667]

Hey thanks man , I want too but I’m back at work with a stuuuupid schedule .. tools are the same just new drill bits and gloves And stuff ... but I do wanna do a small vid going over my belt setup and why I switched back ... definitely has been on my notes .. just gotta bust it out 😁 but hell yeah man thanks and have a good one stay safe out there

[@bloodsongsToolreviews]

Id recumend stronger locks, you can open those master locks with with a hammer easily

[@bigheadrider2667]

I have another set of locks that are a bit beefier I just havnt put them on ... with the main company in with we don’t have any theft issues with a huge crew . Even if they went missing at work I’d ask for a Check to replace them , thanks for pointing it out tho that’s one thing I left out when I got this system . I got the cheapest ones 😬😂

[@rcisourmiddlename]

The man cut his harness 🤦🏻‍♂️

[@bigheadrider2667]

Don’t the brightest idea 😂 I have a new one now that one was like 4 years old

[@fabiokaturagui7558]

👏👏👏👍👍👍👍

[@bigheadrider2667]

Thanks man

[@georgeryan9139]

You are in bad need of some foam to organize your tools and keep them safe.

[@bigheadrider2667]

I’m not one for the kaizen foam for tools that get tossed in and out .. I’ve seen more people on sites juggle with their tools in foam than in not . Hardware would be a different story as I bought a pack out organizer for hardware . But thanks for the Opinión ..... And I got something else for safety

[@bladesandbows1521]

Little advice..... Please rerecord next time with no alarm going off....

[@bigheadrider2667]

Completely serious ....

[@sands1003]

What's the 240 on everything means

[@bigheadrider2667]

It’s a Nissan 240sx ... I used to like them growing up from drifting , and at work I mark all my stuff with the yellow paint marker and 240 so most people know it’s mine ... same thing with electrical tape on tools but tape is easy to take off . Just a personal thing . If I left it normal someone can take it and just call it theirs .

[@codysantala4798]

You're a Lomeli??? I know the Lomeli's!

[@bigheadrider2667]

For the past 24 years hahaha . Oh yeah ??? Not many of us but there out there .... where are you from friend ?

[@codysantala4798]

​@@bigheadrider2667 I work for Lomeli Electric in Santa Maria, Ca. Theres a whole Lomeli clan out here. Where are you from?

[@bigheadrider2667]

@@codysantala4798 awwww hell yeah ! In down here in LA county , 30 mins from the beach and 30 mins from big bear , city called Rowland heights , that’s so cool I never heard of you guys , I’ve worked up there in Tracy for a good bit for out of town work .....

[@codysantala4798]

@@bigheadrider2667 Ive driven through Rowland Heights before. Ive actually been thinking of moving down near L.A. sometime soon because of the good job opportunities. I want to do industrial and up here there's not much of that. How do you like conveyer belt work?

[@codysantala4798]

@@bigheadrider2667 Cool video by the way, Ive been thinking of making my own sometime soon.

[@chuckcole2625]

Shout out seriously I was subscribed till u said that people like that destroy communities and create poverty and destruction.

[@bigheadrider2667]

Shit happens

[@luislazcano5604]

Roban mucho en tu trabajo que tienes que marcar así tus herramientas

[@bigheadrider2667]

No senior , it’s just a habit of mine , just in case someone does steal them .. I know it’ll be my tool