Products that we use and recommend: ► Voltmeter: amzn.to/3Avzf1L ► Panel Removal Set: amzn.to/3YiMADu ► Assorted Fuses: amzn.to/4fx4s3F ► Tool Set: amzn.to/3p5MM6t ► Screwdriver Set: amzn.to/3XRB28Q ► Mobile 1 Oil: amzn.to/3xBc8B9 ► Oil Filter: amzn.to/3w0Ulme ► Torque Wrench: amzn.to/32qyRwg ► Liqui Moly Engine Flush: amzn.to/3IiDBID ► OBD Scanner that we use most often: amzn.to/3I4MQfe ► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
@MrThunderbirdfire4 жыл бұрын
Use 9v small battery... 12v car battery is dangerous and may explode if wires get short accidentally while connecting to relay
@ramiz-Knaan Жыл бұрын
Thank you, I have benefited from your videos a lot, I follow you from Syria, thank you
@YourDailyJewelsNorahDowney2 ай бұрын
I am totally mechanically inept, and I understood your explanation perfectly! Thank you so much for your videos. You are teaching me so much.
@joselimon5298 Жыл бұрын
WHEN ONE IS SMART NO MATTER THE LANGUAGE YOU CAN FIGURE OUT WHAT TO DO...I AM MEXICAN AND I JUST SAVE $600 DOLLARS BY WATCHING THIS VIDEO👍👍👍
@goatontheriver111 ай бұрын
You guys are AWESOME! Thank you! Having a dealership "fix" your car in the states is not affordable! Valuable information in all your videos! Much love!
@shawnrieschl15674 жыл бұрын
Great video. I found a bad cooling fan relay using this method. Beats replacing the fan itself!!
@emmascully98505 жыл бұрын
Really helpful. Tested starter relay, confirmed that it activating and zero resistance when closed. Thanks guys saved me buying a new one just in case!
@elvismanrocks5 жыл бұрын
Don't worry Emma if the relay doesn't work just shoot it with the AK 47.
@lennyconner59882 ай бұрын
After watching the video a few times I better understood you’re accent . Thanks so much for the post you’ve helped me understand my cars relays
@throughthegrace7893 Жыл бұрын
I was reading on a website about testing for resistance and they said to test with no power connected, but this was not specifying relays. Every mechanic actually tests just like you guys.
@mr.fullcirclefitness Жыл бұрын
Tap screen, tap ⚙️ in top right corner, tap playback speed, tap 0.75, your welcome 🙂
@emmascully98505 жыл бұрын
Very helpful, thank you, just tested the relay for starter motor, knew it was activating but also now know that it is zero resistance.
@dasputin8061 Жыл бұрын
God bless your family brother.
@vicjanwa4 жыл бұрын
thank you for SIMPLE WAY TO TESTING RELAY LOVE ITS THANK
@backcountry4lifeАй бұрын
so simple, amazing. Thank you!
@takumibonsai2 ай бұрын
Thankyou, well explained 👍
@AlejandroRamirez-cm9kp3 жыл бұрын
Can you use a car battery to test the relay, or do you need that portable car starter? I'm assuming it'll work but just double-checking.
@guillermotejeda692 Жыл бұрын
Thanks guys always very helpful and informative :) all my recent car searches have landed your videos!!!
@pastorlugo1214 жыл бұрын
Great educational video. Thanks.
@johnndlovu4692 жыл бұрын
My w204 220 cdi 2011 model has a short or circuit break to the positive on the rear left indicator. How do I find and fix that?
@elvismanrocks Жыл бұрын
Excellent video!👍
@dasputin8061 Жыл бұрын
Definitely subscribed.
@ronaldocampbell64845 жыл бұрын
I love your video.
@AnimeGirlRulz14 Жыл бұрын
Is it safe to use a higher amp jump starter for testing?
@carlossalazar-to5em2 жыл бұрын
i have a 1987 bmw 635csi it does not crank or start i already check relays and fuses under hood any advice on why it doesnt crank
@armzforte23 Жыл бұрын
Sr. Thank you very much.!!
@arniceousmaximus2183 Жыл бұрын
I'm glad I watched this thanks mates
@turajdecor41553 жыл бұрын
Chevrolet Cruise L. T 2015 has no problem in P, N and L mode, but in D mode, which we put, it moves forward, but does not change gears by changing the speed and increasing or decreasing the accelerator pedal. What is the correct way to solve the problem?
@funkey3692 Жыл бұрын
Great information
@Everton-qn9ct Жыл бұрын
After jump start and cleaning the engine of my 2004 bmw X3,there is no light in the dash and non of the gauge are working. What donI need to do. Ps.All fuse seems to be working
@justindeutsch18513 жыл бұрын
Any insight to the CX-7 having bad headlight light output? Do the projectors go bad at all or is it just a Mazda CX-7 issue?
@malekamouri88972 жыл бұрын
Hallo my friend i like your videos ,do you know the relé for remote control ford focus 2005 mk2 please? tanks
@Censorship-Eats-Freedom4 жыл бұрын
1:16 You do not have; ''current there all the time'' , this is the coil, (85, 86), when it is powered, the connection is 'made' and 87, 30 are then connected to each other, allowing a lightbulb or other device to turn on.
@throughthegrace7893 Жыл бұрын
Thanks guys
@Boyleheights213por-vida2 жыл бұрын
THANK YOU FRIEND GOOD VIDEO..👍👍👍
@othysnkulu6691 Жыл бұрын
pleease Mr can you show me how i can test thé relais tyco v23086 for thé bmw
@aqeelchohan20122 жыл бұрын
Good afternoon, your videos are always informative. I am having a problem with 2008 Honda Odyssey (290k miles). I have replaced alternator twice, but check charging system and battery light pops up with VSA light too and sometimes it's self and goes away usually. I replaced the battery, battery terminals, checked the motor oil, checked the fuses, checked the ELD( electronic load detector) everything thing seems fine. The alternator I got replaced twice is remanufactured bought from Advance auto parts. Got inspected the battery and alternator from AutoZone. They are charging fine. Personally, checked the alternator performance by removing negative terminal while car is in start and idle position, car doesn't shut off. Is there anything I am missing to find the issue? I forget to mention that the ground wires seems okay too, because it never drains a battery even if I start the car after two days. Head lights doesn't flicker's either!
@kristiemathis52 жыл бұрын
Did you ever figure out the problem ?
@reinaldogonzalez60455 жыл бұрын
do not scrub, you could buy some alligator clips, those are to jump car batteries.
@72nortoncommando3 жыл бұрын
sometimes there are 6 pins, very small compared to the main pin's tabled with a number plus letter a or b how are these extra terminal tested and purpose ?
@josephbenassi96973 жыл бұрын
Can this cause a check engine light to come on?
@bagguexhammeh83483 жыл бұрын
thank you brother
@mackey0625 Жыл бұрын
Love the accent 🔥🔥
@elvismanrocks Жыл бұрын
It sounds German!
@rickmyers93863 ай бұрын
Clear as mud. JEEZ!!
@youngmalcolm86035 жыл бұрын
I thought when u measure resistance there is not supposed to be any power hooked up???
@FutureGameLight4 жыл бұрын
without the power the relai does not connect so you would have complete resistance anyway
@RSVlogs-fam4 жыл бұрын
Thank you for the tips i like it now i know how to test this parts...
@passagecreekbees3483 жыл бұрын
tks,very helpful
@jpgpearson5 жыл бұрын
can you tell me how to test a 220v ac relay what to use as a power source
@armydays874 жыл бұрын
If you want to test a 220V relay, you need 220V line voltage (power supply)
@kiwiexotics19824 жыл бұрын
Hi, I have a BMW 318i e46 1995cc when im driving along the road it like stalls to 1200rpm's it can be for 3 seconds to 30 seconds it just slows right down into a limp mode or wont move at all then all of a sudden it goes fine again but it does it regularly. I have had it into a BMW specialists noone can come up with codes. So Im having this problem NO CODES? 6 garages and a BMW computer diagnostics nothing yet it still does it the eccentric shaft and all was replaced MAF TPS airbox has a leak replaced. Any Ideas??
@uniworldwide4465 Жыл бұрын
Fuses and dme
@alisharifi80544 жыл бұрын
my transmission of my bmw e60 is sometimes stopping but its runs and shifting ok is it the relays?
@canadian_wolf83953 жыл бұрын
Nice profile pic👌😂
@pbjstudios6202 Жыл бұрын
Guys...guys... Please Buy a tripod with a arm and Mobile Phone Holder while you go live so you can have your hands free to use them. Love your channel but this drives me crazy when you try to juggle your mobile phone with a part... Keep doing what you do!
@habtamusium86463 жыл бұрын
thanks !
@MrThunderbirdfire4 жыл бұрын
Use 9v small battery... 12v car battery is dangerous and may explode if wires get short accidentally while connecting to relay
@BrettHoustonTube4 жыл бұрын
If it moves, clean the contacts, corrosion could be the simplest cause.
@noahway133 жыл бұрын
Real beginner here. You didn't show how the wires go into the multimeter. There are three holes in mine. I think I eventually figured it out.
@Leon-xl6pi Жыл бұрын
what if the relay show 0.02?
@exil3dlivecom4 жыл бұрын
I had a relay that clicked and ohmns dropped to almost zero when energized and it still was a bad relay. Carbon buildup?
@Zach-nv4ul4 жыл бұрын
Relay aren’t supposed to have any resistance.
@exil3dlivecom4 жыл бұрын
@@Zach-nv4ul whay ever the case was, that thing clicked amd passed the meter test. But failed the swap out test with a new one.
@Grey5.04 жыл бұрын
The relay im testing have NUMBERS: 5, 2, 1, 3. HELP
@FutureGameLight4 жыл бұрын
just open it and look at the layout
@EveryBitOfBree2 жыл бұрын
Hey is there anyway I can ask you all some questions about my car directly. I’ll pay
@treslongwell13324 жыл бұрын
any 4- pin relay. Mine is 6
@RulisGarage2 жыл бұрын
It's so damn hard to test a relay if you're working alone, what I do is I either switch it or replace it instead of all this none sense of testing
@SoulDaddy334 жыл бұрын
Too tough for me to interpret the accent and concentrate on the content but thanks for the effort.
@VGMStudios334 жыл бұрын
Seriously? Snowflake.
@SoulDaddy334 жыл бұрын
@@VGMStudios33Did you want to go and call the other 4 people who agreed with me little names, too?
@MetronomeSenpai3 жыл бұрын
@@VGMStudios33 Lmao love when ppl get butthurt over internet comments
@hsydhxhxbdbxhx2338 Жыл бұрын
Stop being a bitch
@ConorMcHedor Жыл бұрын
@SoulDaddy33 he speaks perfect English 😆
@Rachel_Gordon6 жыл бұрын
Don't take this the wrong way man but try slowing down when your talking bc I literally can't understand half of what your saying...good video but just some cunstructive criticism
@TheDerrty1115 жыл бұрын
You listen to slow! haha i understand every words he said and i live in the Amazon Rainforest
@sproket1685 жыл бұрын
Lol funny
@itsastraeus1575 жыл бұрын
Theres an option to slow down the video and audio to 75%,50%,etc
@Noone-ku2my5 жыл бұрын
Rachel Lynn That's why we have captions
@MetronomeSenpai3 жыл бұрын
@vasile F S Well, what's wrong with Rachel trying to express her opinion on the internet? Why should her be shamed of? Lmao, fucking internet nazi.. Btw I can't understand what he's saying either, and English is my second language as well and yet I at tried my absolute best to make sure people can understand my accent. If we can't understand his accent then we should be shame for ourselves?? WTF is wrong with you? I appreciate the fact that he's sharing his knowledge with us, but holly shit that doesn't mean people don't have the right to judge him. It's fucking KZbin for crying out loud. If you don't want your feelings get hurt, unplug your router.
@osmarantonio93083 жыл бұрын
Eu não entendi nada, até parece que está falando inglês kkkkk
@shermananderson7004 жыл бұрын
Thank you for the effort to make the video. But, your skill with English language needs some tutoring. Then your presentation would earn a plus rating. That’s the way it is inAmerica.
@MrBarrynicholas4 жыл бұрын
Sorry no thanks.
@oibal605 жыл бұрын
Try practicing beforehand please. That was pretty awful.
@dcclyde5754 жыл бұрын
Can you speak in English? please🙃
@VGMStudios334 жыл бұрын
Shut up. Idiot. Where's your videos?
@greggdrake4 жыл бұрын
No, stop
@Censorship-Eats-Freedom4 жыл бұрын
Does everyone else have meters that read 0 ohms resistance, mine are pretty cheap and read about .5 ohm where there is good continuity. :) Edit; just got out my 'Ideal' multi meter, its pretty good, but reads 2ohms best continuity...shrugs....
@stephenkoomson4625 Жыл бұрын
I changed the two front seats for my 2007 mkx , and the vehicle won't start though it run perfectly fine before the installation. The dome light won't shut off and the high beam on the instrument cluster stays on. I need help fixing these. Any advice will be welcome,