Static Excitation System For 210MW Alternator in Power Plants [Hindi]

[@adityayadav6712]

BAHUT BADHIYA EXPLANATION SIR...........AEWSOME😍

[@ElectricalTalks]

Thanks

[@akshaythakur5801]

Thanx aloat sir.... I am currently working in hydro plant... And our plant have static excitation system but after watching your video my all doubt regarding excitation system are clear❤

[@proholladroy6211]

🙏🙏🙏 thanks from Bangladesh

[@priyaranjanmallick8362]

Sir , It's true that your approach has been practical in this video . However , the way you have demonstrated to the point technical facts , concept is truly clear Sir .

[@ElectricalTalks]

Thanks 👍

[@ghulamqadir2716]

​@@ElectricalTalks❤

[@priyaranjanmallick8362]

Outstanding Introduction of AVR by your good self of course Sir .

[@surendrakverma555]

Excellent lecture Sir. Thanks 🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏

[@rajeshmohan7881]

Superb explanation.

[@syedhassnainali2917]

Thank you very much Sir very informative video

[@siyaramrathore6722]

nice explain Sir 👍

[@ElectricalTalks]

Thanks brother

[@tusharpawar2182]

Sir salute to you

[@sourabhrai7720]

Nice explained....but tum ke bajaye aap bolna chahiye...give respect take respect

[@ElectricalTalks]

Sorry sir if you feel hurt. But my intention is not to disrespect others. And heartfelt thanks for your suggestion.

[@DEEPCHAND-mb2xh]

Knowledge lene aaya ya fhir communication learn kerne

[@sourabhrai7720]

@@DEEPCHAND-mb2xh dono lene aaya hoon...tu kya lene aaya hai?

[@DEEPCHAND-mb2xh]

@@sourabhrai7720 knowledge..baki to tere se sikh liya 😀

[@sourabhrai7720]

@@DEEPCHAND-mb2xh or kuch seekhana hai to bata...sab sikhata hoon tujhe...

[@shubhamkashyap1333]

thanks bro

[@ElectricalTalks]

Welcome

[@praveshchauhan6063]

Nice 👍

[@WorldOnWheelsBaby]

In excitation system is rotor short or open ?

[@proholladroy6211]

🙏🙏

[@AnuragSingh-ol6rp]

Field flashing krte time hum kitna voltage dete hai ?

[@jyotidahiya8405]

Sir Why Dyn5 configuration is used in static excitation transformer?

[@ElectricalTalks]

Good question. It will be discussed

[@jyotidahiya8405]

Sir, Please explain the response ratio also, how response ratio is calculated ?

[@praveshpal2306]

Sir kya ham running plant m AVR panel off kar sakte h

[@ElectricalTalks]

Practically no. Theoretically, ho sokta hai. but voltage load ke sath hugely vary karega.

[@syed_taha_ahmed]

What about exciter stator supply. Is it provided by Exciter transformer output

[@ahmadmasterkargily3690]

Good

[@sanykumarsingh7778]

Sir, please make a video on your IIT journey and interview experience

[@ElectricalTalks]

such videos are already uploaded. If you have specific queries you may ask here or through e-mail too.

[@thepurposeofmyexistence2511]

nice video sir but , I couldn't get that when at starting condition the alternator rotor will rotate along with diesel engine shaft , at that time we don't have DC source for excitation due to the winding are not producing current bez we only rotating the winddings in rotor side of alternator and not making them as magent this is at initial time startup condition, so how we overcome this

[@ElectricalTalks]

Nice question. For this, an external dc source or rectified ac source is used at starting....this arrangement is called field flashing.

[@funwithsisters6724]

Sir mai ek hydro power plant mai kam karta houe jaha satatic excition system use hota hai aur waha pmg aur main aur pailet exciter bhi use ho raha hai mai confuse ho raha houe burshless aue static excitation system mai please meri problem solve karey

[@ElectricalTalks]

Are slipring & carbon brush also used in that system?

[@ElectricalTalks]

I would like to know.... how do you know that system is static excitation system?

[@funwithsisters6724]

Sir it is self excitation system

[@funwithsisters6724]

Kindly make a vedio over self excition and pmg and main exciter and piolet exciter

[@ElectricalTalks]

brushless excitation system is also self excitation. Can you tell me whether carbon brushes are used or not?

[@syed_taha_ahmed]

I've one question. The generator is connected with bus through step up transformer. At rated load there will be the %Voltage drop equalent to %impedance of transformer. Does AVR have to carter that drop also? or it will be reflected it in Armature reaction ?

[@akashsenta3601]

Respected Sir, Why Vector group use Dyn5 Another vector group why not used. Explain please.

[@akashsenta3601]

Please explain it

[@priyaranjanmallick8362]

Sir , Nsmaskaar . One practical observation based question , I have mailed to you so as to take up if possible . I hope , you will not definitely disappoint Sir .

[@ElectricalTalks]

check your email & reply

[@b.anthonichristopher103]

Sir gd explain this use for thermal power plant... Now i am work in gas turbine generator powerplant so use brush supply for static excitation equipment pls explain

[@parthchudasama9750]

What is roll of Exciter stator winding?

[@priyaranjanmallick8362]

Sir , Why exactly Dry Type Transformer is used for Excitation ?

[@ElectricalTalks]

Dry type transformers are normally used when the rating is not too high & there is facility of keeping it indoor. Dry type transformers require almost no maintenance & economic too.

[@549_nagarkrishna9]

why FB is used..?

[@b.anthonichristopher103]

Startic frequency converter why use

[@priyaranjanmallick8362]

Sir , What is the logic behind the term Static ?

[@ElectricalTalks]

nice question. Its the source of excitation

[@priyaranjanmallick8362]

@@ElectricalTalks I couldn't get you this instance Sir .

[@ElectricalTalks]

@@priyaranjanmallick8362 No matter. This is very interesting query. I will explain this through a video.

[@rahulbhandary9393]

Ceiling excitation and nominal excitation keya hai????❤❤ Make video regarding this. If anyone knows please let me know 🙏

[@chinmaymathur2430]

Aisa laga ki, jo padhne aya tha wo to padha hi nhi

[@kalaivanank7783]

Avr input is low voltage enter how to monitor generator output voltage lekin vo voltage is 15.7 something

[@ElectricalTalks]

Sorry, your question is not clear to me. You may clarify it.

[@marzooqalbeladi5358]

Can u speak English to understand

[@nitinshirivastav5644]

Kuch palle nii padde

[@prathmeshkhedekar4839]

sir how to contact u any mail id or contact

[@ranaali5510]

Why engag excitation at 2900 RPM ?

[@deltech9947]

Well explained ji

[@yograjsharma7533]

How rotor current is measured